Re: [PATCH V7 05/10] acpi: apei: handle SEA notification type for ARMv8

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Tyler,

On 12/01/17 18:15, Tyler Baicar wrote:
> ARM APEI extension proposal added SEA (Synchrounous External

Nit: Synchronous

> Abort) notification type for ARMv8.
> Add a new GHES error source handling function for SEA. If an error
> source's notification type is SEA, then this function can be registered
> into the SEA exception handler. That way GHES will parse and report
> SEA exceptions when they occur.

> diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c
> index 2acbc60..87efe26 100644
> --- a/drivers/acpi/apei/ghes.c
> +++ b/drivers/acpi/apei/ghes.c
> @@ -767,6 +772,62 @@ static struct notifier_block ghes_notifier_sci = {
>  	.notifier_call = ghes_notify_sci,
>  };
>  
> +#ifdef CONFIG_HAVE_ACPI_APEI_SEA
> +static LIST_HEAD(ghes_sea);
> +
> +static int ghes_notify_sea(struct notifier_block *this,
> +				  unsigned long event, void *data)
> +{
> +	struct ghes *ghes;
> +	int ret = NOTIFY_DONE;
> +

> +	nmi_enter();

Can we move this into the arch code? Its because we got here from a
synchronous-exception that makes this nmi-like, I think it only makes sense for
it be called from under /arch/.


Where did the rcu_read_lock() go? I can see its missing from ghes_notify_nmi()
too, but I don't know enough about RCU to know if that's safe!

The second paragraph in the comment above rcu_read_lock() describes it as
preventing call_rcu() during a read-side critical section that was running
concurrently. Doesn't this mean we can race with ghes_sea_remove() on another
CPU because we wait for the wrong grace period?

The same comment talks about how these read-side critical sections can nest, so
I think its quite safe to make these 'lock' calls here.


> +	list_for_each_entry_rcu(ghes, &ghes_sea, list) {
> +		if (!ghes_proc(ghes))
> +			ret = NOTIFY_OK;
> +	}
> +	nmi_exit();
> +
> +	return ret;
> +}
> +
> +static struct notifier_block ghes_notifier_sea = {
> +	.notifier_call = ghes_notify_sea,
> +};
> +
> +static int ghes_sea_add(struct ghes *ghes)
> +{
> +	mutex_lock(&ghes_list_mutex);
> +	if (list_empty(&ghes_sea))
> +		register_sea_notifier(&ghes_notifier_sea);
> +	list_add_rcu(&ghes->list, &ghes_sea);
> +	mutex_unlock(&ghes_list_mutex);
> +	return 0;
> +}
> +
> +static void ghes_sea_remove(struct ghes *ghes)
> +{
> +	mutex_lock(&ghes_list_mutex);
> +	list_del_rcu(&ghes->list);
> +	if (list_empty(&ghes_sea))
> +		unregister_sea_notifier(&ghes_notifier_sea);
> +	mutex_unlock(&ghes_list_mutex);

ghes_nmi_remove() has:
>	/*
>  	* To synchronize with NMI handler, ghes can only be
>  	* freed after NMI handler finishes.
> 	*/
> 	synchronize_rcu()

This 'waits until a grace period has elapsed'. This is because ghes_remove()
goes and kfree()s the ghes object while another CPU may be holding that entry in
the list in ghes_notify_sea().


> +}
> +#else /* CONFIG_HAVE_ACPI_APEI_SEA */
> +static inline int ghes_sea_add(struct ghes *ghes)
> +{
> +	pr_err(GHES_PFX "ID: %d, trying to add SEA notification which is not supported\n",
> +	       ghes->generic->header.source_id);
> +	return -ENOTSUPP;
> +}
> +
> +static inline void ghes_sea_remove(struct ghes *ghes)
> +{
> +	pr_err(GHES_PFX "ID: %d, trying to remove SEA notification which is not supported\n",
> +	       ghes->generic->header.source_id);
> +}
> +#endif /* CONFIG_HAVE_ACPI_APEI_SEA */
> +
>  #ifdef CONFIG_HAVE_ACPI_APEI_NMI
>  /*
>   * printk is not safe in NMI context.  So in NMI handler, we allocate
> @@ -1011,6 +1072,14 @@ static int ghes_probe(struct platform_device *ghes_dev)
>  	case ACPI_HEST_NOTIFY_EXTERNAL:
>  	case ACPI_HEST_NOTIFY_SCI:
>  		break;
> +	case ACPI_HEST_NOTIFY_SEA:
> +		if (!IS_ENABLED(CONFIG_HAVE_ACPI_APEI_SEA)) {
> +			pr_warn(GHES_PFX "Generic hardware error source: %d notified via SEA is not supported\n",
> +				generic->header.source_id);
> +			rc = -ENOTSUPP;
> +			goto err;
> +		}
> +		break;
>  	case ACPI_HEST_NOTIFY_NMI:
>  		if (!IS_ENABLED(CONFIG_HAVE_ACPI_APEI_NMI)) {
>  			pr_warn(GHES_PFX "Generic hardware error source: %d notified via NMI interrupt is not supported!\n",
> @@ -1022,6 +1091,13 @@ static int ghes_probe(struct platform_device *ghes_dev)
>  		pr_warning(GHES_PFX "Generic hardware error source: %d notified via local interrupt is not supported!\n",
>  			   generic->header.source_id);
>  		goto err;


> +	case ACPI_HEST_NOTIFY_GPIO:
> +	case ACPI_HEST_NOTIFY_SEI:
> +	case ACPI_HEST_NOTIFY_GSIV:

These three weren't mentioned in the commit message. I guess they are drive-by
cleanup?


> +		pr_warn(GHES_PFX "Generic hardware error source: %d notified via notification type %u is not supported\n",
> +			generic->header.source_id, generic->header.source_id);
> +		rc = -ENOTSUPP;
> +		goto err;
>  	default:
>  		pr_warning(FW_WARN GHES_PFX "Unknown notification type: %u for generic hardware error source: %d\n",
>  			   generic->notify.type, generic->header.source_id);


Thanks,

James


--
To unsubscribe from this list: send the line "unsubscribe linux-efi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux