On 16 November 2015 at 20:50, Ryan Harkin <ryan.harkin@xxxxxxxxxx> wrote: > Hi Ard, > > On 16 November 2015 at 18:32, Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx> wrote: >> This series adds support for booting the 32-bit ARM kernel directly from >> UEFI firmware using a builtin UEFI stub. It mostly reuses refactored arm64 >> code, and the differences (primarily the PE/COFF header and entry point and >> the efi_create_mapping() implementation) are split out into arm64 and ARM >> versions. >> >> Changes since v1: >> - The primary difference between this version and the first one is that all >> prerequisites have either been merged, dropped for now (early FDT handling) >> or folded into this series (MEMBLOCK_NOMAP). IOW, this series can be applied >> on top of v4.4-rc1 directly. >> - Dropped handling of UEFI permission bits. The reason is that the UEFIv2.5 >> approach (EFI_PROPERTIES_TABLE) is flawed, and will be replaced by something >> better in the next version of the spec. >> >> Patch #1 adds support for the MEMBLOCK_NOMAP attribute to the generic memblock >> code. Its purpose is to annotate memory regions as normal memory even if they >> are removed from the kernel direct mapping. >> >> Patch #2 implements MEMBLOCK_NOMAP support for arm64 >> >> Patch #3 updates the EFI init code to remove UEFI reserved regions and regions >> used by runtime services from the kernel direct mapping >> >> Patch #4 splits off most of arch/arm64/kernel/efi.c into arch agnostic files >> arm-init.c and arm-runtime.c under drivers/firmware/efi. >> >> Patch #5 refactors the code split off in patch #1 to isolate the arm64 specific >> pieces, and change a couple of arm64-isms that ARM handles slightly differently. >> >> Patch #6 enables the generic early_ioremap and early_memremap implementations >> for ARM. It reuses the kmap fixmap region, which is not used that early anyway. >> >> Patch #7 splits off the core functionality of create_mapping() into a new >> function __create_mapping() that we can reuse for mapping UEFI runtime regions. >> >> Patch #8 factors out the early_alloc() routine so we can invoke __create_mapping >> using another (late) allocator. >> >> Patch #9 implements create_mapping_late() that uses a late allocator. >> >> Patch #10 implements MEMBLOCK_NOMAP support for ARM >> >> Patch #11 implements the UEFI support in the kernel proper to probe the UEFI >> memory map and map the runtime services. >> >> Patch #12 ties together all of the above, by implementing the UEFI stub, and >> introducing the Kconfig symbols that allow all of this to be built. >> >> Instructions how to build and run the 32-bit ARM UEFI firmware can be found here: >> https://wiki.linaro.org/LEG/UEFIforQEMU >> >> Ard Biesheuvel (11): >> mm/memblock: add MEMBLOCK_NOMAP attribute to memblock memory table >> arm64: only consider memblocks with NOMAP cleared for linear mapping >> arm64/efi: mark UEFI reserved regions as MEMBLOCK_NOMAP >> arm64/efi: split off EFI init and runtime code for reuse by 32-bit ARM >> arm64/efi: refactor EFI init and runtime code for reuse by 32-bit ARM >> ARM: add support for generic early_ioremap/early_memremap >> ARM: split off core mapping logic from create_mapping >> ARM: factor out allocation routine from __create_mapping() >> ARM: implement create_mapping_late() for EFI use >> ARM: only consider memblocks with NOMAP cleared for linear mapping >> ARM: wire up UEFI init and runtime support >> >> Roy Franz (1): >> ARM: add UEFI stub support >> >> arch/arm/Kconfig | 20 ++ >> arch/arm/boot/compressed/Makefile | 4 +- >> arch/arm/boot/compressed/efi-header.S | 130 ++++++++ >> arch/arm/boot/compressed/head.S | 54 +++- >> arch/arm/boot/compressed/vmlinux.lds.S | 7 + >> arch/arm/include/asm/Kbuild | 1 + >> arch/arm/include/asm/efi.h | 90 ++++++ >> arch/arm/include/asm/fixmap.h | 29 +- >> arch/arm/include/asm/mach/map.h | 1 + >> arch/arm/kernel/Makefile | 1 + >> arch/arm/kernel/efi.c | 38 +++ >> arch/arm/kernel/setup.c | 10 +- >> arch/arm/mm/init.c | 5 +- >> arch/arm/mm/ioremap.c | 9 + >> arch/arm/mm/mmu.c | 110 ++++--- >> arch/arm64/include/asm/efi.h | 16 + >> arch/arm64/kernel/efi.c | 331 ++------------------ >> arch/arm64/mm/init.c | 2 +- >> arch/arm64/mm/mmu.c | 2 + >> drivers/firmware/efi/Makefile | 4 + >> drivers/firmware/efi/arm-init.c | 197 ++++++++++++ >> drivers/firmware/efi/arm-runtime.c | 134 ++++++++ >> drivers/firmware/efi/efi.c | 2 + >> drivers/firmware/efi/libstub/Makefile | 9 + >> drivers/firmware/efi/libstub/arm-stub.c | 4 +- >> drivers/firmware/efi/libstub/arm32-stub.c | 85 +++++ >> include/linux/memblock.h | 8 + >> mm/memblock.c | 28 ++ >> 28 files changed, 975 insertions(+), 356 deletions(-) >> create mode 100644 arch/arm/boot/compressed/efi-header.S >> create mode 100644 arch/arm/include/asm/efi.h >> create mode 100644 arch/arm/kernel/efi.c >> create mode 100644 drivers/firmware/efi/arm-init.c >> create mode 100644 drivers/firmware/efi/arm-runtime.c >> create mode 100644 drivers/firmware/efi/libstub/arm32-stub.c >> >> -- >> 1.9.1 >> > > I've tested this series against 4.4-rc1 on Versatile Express TC2, > booting both as a "regular" kernel and as a EFI Stub on BusyBox and > OpenEmbedded. So if it helps any, you can add my: > > Tested-by: Ryan Harkin <ryan.harkin@xxxxxxxxxx> > Thanks Ryan! -- To unsubscribe from this list: send the line "unsubscribe linux-efi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
