Re: [PATCH 01/44] kernel: Add support for poweroff handler call chain

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jun 18, 2015 at 1:54 PM, Guenter Roeck <linux@xxxxxxxxxxxx> wrote:
> On 06/17/2015 11:53 PM, Frans Klaver wrote:
>>
>> On Thu, Jun 18, 2015 at 3:04 AM, Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
>> wrote:
>>>
>>> On 10/06/2014 10:28 PM, Guenter Roeck wrote:
>>>>
>>>> Various drivers implement architecture and/or device specific means to
>>>> remove power from the system.  For the most part, those drivers set the
>>>> global variable pm_power_off to point to a function within the driver.
>>>>
>>>> This mechanism has a number of drawbacks.  Typically only one scheme
>>>> to remove power is supported (at least if pm_power_off is used).
>>>> At least in theory there can be multiple means remove power, some of
>>>> which may be less desirable. For example, some mechanisms may only
>>>> power off the CPU or the CPU card, while another may power off the
>>>> entire system.  Others may really just execute a restart sequence
>>>> or drop into the ROM monitor. Using pm_power_off can also be racy
>>>> if the function pointer is set from a driver built as module, as the
>>>> driver may be in the process of being unloaded when pm_power_off is
>>>> called. If there are multiple poweroff handlers in the system, removing
>>>> a module with such a handler may inadvertently reset the pointer to
>>>> pm_power_off to NULL, leaving the system with no means to remove power.
>>>>
>>>> Introduce a system poweroff handler call chain to solve the described
>>>> problems.  This call chain is expected to be executed from the
>>>> architecture specific machine_power_off() function.  Drivers providing
>>>> system poweroff functionality are expected to register with this call
>>>> chain.
>>>> By using the priority field in the notifier block, callers can control
>>>> poweroff handler execution sequence and thus ensure that the poweroff
>>>> handler with the optimal capabilities to remove power for a given system
>>>> is called first.
>>>
>>>
>>> What happened to this series? I want to add shutdown support to my
>>> platform and I need to write a register on the PMIC in one driver to
>>> configure it for shutdown instead of restart and then write an MMIO
>>> register to tell the PMIC to actually do the shutdown in another driver.
>>> It seems that the notifier solves this case for me, albeit with the
>>> slight complication that I need to order the two with some priority.
>>
>>
>> I was wondering the same thing. I did find out that things kind of
>> stalled after Linus cast doubt on the chosen path [1]. I'm not sure
>> there's any consensus on what would be best to do instead.
>>
>
> Linus cast doubt on it, then the maintainers started picking it apart.
> At the end, trying not to use notifier callbacks made the code so
> complicated that even I didn't understand it anymore. With no consensus
> in sight, I abandoned it.
>
> Problem is really that the notifier call chain would be perfect to solve
> the problem, yet Linus didn't like priorities (which are essential),
> and the power maintainers didn't like that a call chain is supposed
> to execute _all_ callbacks, which would not be the case here. If I were
> to start again, I would insist to use notifiers. However, I don't see
> a chance to get that accepted, so I won't. Feel free to pick it up and
> give it a try yourself.

How about having two phases? One where all interested parts of the
system get notified, one that does the final shutdown. It's a slightly
different approach than you took, but does use the notifier chains as
expected, and can be used to prepare peripherals for shutdown, if
there's a use case for it.

The two-stage approach does keep the single place to power down. I
expect it would become more obvious that it would be silly to have
more than one actual system power down sequence and hiding
pm_power_off and unifying setting of it should become more straight
forward as well.

Thoughts?

Thanks,
Frans
--
To unsubscribe from this list: send the line "unsubscribe linux-efi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux