Re: [PATCH 1/8] x86, kaslr: get kaslr_enabled back correctly

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Mar 2, 2015 at 12:56 AM, Borislav Petkov <bp@xxxxxxx> wrote:
> On Sun, Mar 01, 2015 at 12:41:10PM -0800, Yinghai Lu wrote:
>> Does not look safe yet...
>
> Why?

We can not assume that range is safe to use.

Please check attach one that should fix the problem really.

Thanks

Yinghai
Subject: [PATCH] x86, boot: keep data from boot stage to kernel stage.

Need to
1. move compressed kernel close the end of buffer instead of middle of it.
2. use BRK to extend init_size so no one from kernel bss and brk will
   touch the data region from boot/compressed/misc.c

Signed-off-by: Yinghai Lu <yinghai@xxxxxxxxxx>

---
 arch/x86/boot/compressed/head_32.S |   13 +++++++++++--
 arch/x86/boot/compressed/head_64.S |   10 ++++++++--
 arch/x86/boot/compressed/misc.c    |    4 ++++
 arch/x86/boot/compressed/mkpiggy.c |    3 ---
 arch/x86/include/asm/boot.h        |    2 ++
 arch/x86/kernel/asm-offsets.c      |    1 +
 arch/x86/kernel/setup.c            |    3 +++
 7 files changed, 29 insertions(+), 7 deletions(-)

Index: linux-2.6/arch/x86/boot/compressed/head_64.S
===================================================================
--- linux-2.6.orig/arch/x86/boot/compressed/head_64.S
+++ linux-2.6/arch/x86/boot/compressed/head_64.S
@@ -102,7 +102,10 @@ ENTRY(startup_32)
 1:
 
 	/* Target address to relocate to for decompression */
-	addl	$z_extract_offset, %ebx
+	movl	BP_init_size(%esi), %eax
+	subl	$_end, %eax
+	andl	$(~(4096-1)), %eax
+	addl	%eax, %ebx
 
 /*
  * Prepare for entering 64 bit mode
@@ -330,7 +333,10 @@ preferred_addr:
 1:
 
 	/* Target address to relocate to for decompression */
-	leaq	z_extract_offset(%rbp), %rbx
+	movl	BP_init_size(%rsi), %ebx
+	subl	$_end, %ebx
+	andl	$(~(4096-1)), %ebx
+	addq	%rbp, %rbx
 
 	/* Set up the stack */
 	leaq	boot_stack_end(%rbx), %rsp
Index: linux-2.6/arch/x86/kernel/asm-offsets.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/asm-offsets.c
+++ linux-2.6/arch/x86/kernel/asm-offsets.c
@@ -66,6 +66,7 @@ void common(void) {
 	OFFSET(BP_hardware_subarch, boot_params, hdr.hardware_subarch);
 	OFFSET(BP_version, boot_params, hdr.version);
 	OFFSET(BP_kernel_alignment, boot_params, hdr.kernel_alignment);
+	OFFSET(BP_init_size, boot_params, hdr.init_size);
 	OFFSET(BP_pref_address, boot_params, hdr.pref_address);
 	OFFSET(BP_code32_start, boot_params, hdr.code32_start);
 
Index: linux-2.6/arch/x86/kernel/setup.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/setup.c
+++ linux-2.6/arch/x86/kernel/setup.c
@@ -111,6 +111,7 @@
 #include <asm/mce.h>
 #include <asm/alternative.h>
 #include <asm/prom.h>
+#include <asm/boot.h>
 
 /*
  * max_low_pfn_mapped: highest direct mapped pfn under 4GB
@@ -144,6 +145,8 @@ int default_check_phys_apicid_present(in
 }
 #endif
 
+RESERVE_BRK(addon_zo, BOOT_ADDON_ZO_SIZE);
+
 struct boot_params boot_params;
 
 /*
Index: linux-2.6/arch/x86/boot/compressed/head_32.S
===================================================================
--- linux-2.6.orig/arch/x86/boot/compressed/head_32.S
+++ linux-2.6/arch/x86/boot/compressed/head_32.S
@@ -148,7 +148,10 @@ preferred_addr:
 1:
 
 	/* Target address to relocate to for decompression */
-	addl	$z_extract_offset, %ebx
+	movl    BP_init_size(%esi), %eax
+	subl    $_end, %eax
+	andl    $(~(4096-1)), %eax
+	addl    %eax, %ebx
 
 	/* Set up the stack */
 	leal	boot_stack_end(%ebx), %esp
@@ -210,8 +213,14 @@ relocated:
 				/* push arguments for decompress_kernel: */
 	pushl	$z_run_size	/* size of kernel with .bss and .brk */
 	pushl	$z_output_len	/* decompressed length, end of relocs */
-	leal	z_extract_offset_negative(%ebx), %ebp
+
+	movl    BP_init_size(%esi), %eax
+	subl    $_end, %eax
+	andl    $(~(4096-1)), %eax
+	movl	%ebx, %ebp
+	subl	%eax, %ebp
 	pushl	%ebp		/* output address */
+
 	pushl	$z_input_len	/* input_len */
 	leal	input_data(%ebx), %eax
 	pushl	%eax		/* input_data */
Index: linux-2.6/arch/x86/boot/compressed/mkpiggy.c
===================================================================
--- linux-2.6.orig/arch/x86/boot/compressed/mkpiggy.c
+++ linux-2.6/arch/x86/boot/compressed/mkpiggy.c
@@ -85,9 +85,6 @@ int main(int argc, char *argv[])
 	printf("z_output_len = %lu\n", (unsigned long)olen);
 	printf(".globl z_extract_offset\n");
 	printf("z_extract_offset = 0x%lx\n", offs);
-	/* z_extract_offset_negative allows simplification of head_32.S */
-	printf(".globl z_extract_offset_negative\n");
-	printf("z_extract_offset_negative = -0x%lx\n", offs);
 	printf(".globl z_run_size\n");
 	printf("z_run_size = %lu\n", run_size);
 
Index: linux-2.6/arch/x86/boot/compressed/misc.c
===================================================================
--- linux-2.6.orig/arch/x86/boot/compressed/misc.c
+++ linux-2.6/arch/x86/boot/compressed/misc.c
@@ -366,6 +366,8 @@ static void parse_elf(void *output)
 	free(phdrs);
 }
 
+extern char _rodata[], _end[];
+
 asmlinkage __visible void *decompress_kernel(void *rmode, memptr heap,
 				  unsigned char *input_data,
 				  unsigned long input_len,
@@ -392,6 +394,8 @@ asmlinkage __visible void *decompress_ke
 
 	console_init();
 	debug_putstr("early console in decompress_kernel\n");
+	if (_end - _rodata > BOOT_ADDON_ZO_SIZE)
+		debug_putstr("BOOT_ADDON_ZO_SIZE too small\n");
 
 	free_mem_ptr     = heap;	/* Heap */
 	free_mem_end_ptr = heap + BOOT_HEAP_SIZE;
Index: linux-2.6/arch/x86/include/asm/boot.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/boot.h
+++ linux-2.6/arch/x86/include/asm/boot.h
@@ -37,4 +37,6 @@
 #define BOOT_STACK_SIZE	0x1000
 #endif
 
+#define BOOT_ADDON_ZO_SIZE 0x40000
+
 #endif /* _ASM_X86_BOOT_H */

[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux