This adds support to the UEFI side for detecting the presence of
a SMBIOS 3.0 64-bit entry point. This allows the actual SMBIOS
structure table to reside at a physical offset over 4 GB, which
cannot be supported by the legacy SMBIOS 32-bit entry point.
Since the firmware can legally provide both entry points, store
the SMBIOS 3.0 entry point in a separate variable, and let the
DMI decoding layer decide which one will be used.
Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@xxxxxxx>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
---
drivers/firmware/efi/efi.c | 4 ++++
include/linux/efi.h | 6 +++++-
2 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c
index 64ecbb501c50..3947caccff2d 100644
--- a/drivers/firmware/efi/efi.c
+++ b/drivers/firmware/efi/efi.c
@@ -30,6 +30,7 @@ struct efi __read_mostly efi = {
.acpi = EFI_INVALID_TABLE_ADDR,
.acpi20 = EFI_INVALID_TABLE_ADDR,
.smbios = EFI_INVALID_TABLE_ADDR,
+ .smbios3 = EFI_INVALID_TABLE_ADDR,
.sal_systab = EFI_INVALID_TABLE_ADDR,
.boot_info = EFI_INVALID_TABLE_ADDR,
.hcdp = EFI_INVALID_TABLE_ADDR,
@@ -64,6 +65,8 @@ static ssize_t systab_show(struct kobject *kobj,
str += sprintf(str, "ACPI=0x%lx\n", efi.acpi);
if (efi.smbios != EFI_INVALID_TABLE_ADDR)
str += sprintf(str, "SMBIOS=0x%lx\n", efi.smbios);
+ if (efi.smbios3 != EFI_INVALID_TABLE_ADDR)
+ str += sprintf(str, "SMBIOS3=0x%lx\n", efi.smbios3);
if (efi.hcdp != EFI_INVALID_TABLE_ADDR)
str += sprintf(str, "HCDP=0x%lx\n", efi.hcdp);
if (efi.boot_info != EFI_INVALID_TABLE_ADDR)
@@ -238,6 +241,7 @@ static __initdata efi_config_table_type_t common_tables[] = {
{MPS_TABLE_GUID, "MPS", &efi.mps},
{SAL_SYSTEM_TABLE_GUID, "SALsystab", &efi.sal_systab},
{SMBIOS_TABLE_GUID, "SMBIOS", &efi.smbios},
+ {SMBIOS3_TABLE_GUID, "SMBIOS 3.0", &efi.smbios3},
{UGA_IO_PROTOCOL_GUID, "UGA", &efi.uga},
{NULL_GUID, NULL, NULL},
};
diff --git a/include/linux/efi.h b/include/linux/efi.h
index 45cb4ffdea62..8760b9aed2bb 100644
--- a/include/linux/efi.h
+++ b/include/linux/efi.h
@@ -542,6 +542,9 @@ void efi_native_runtime_setup(void);
#define SMBIOS_TABLE_GUID \
EFI_GUID( 0xeb9d2d31, 0x2d88, 0x11d3, 0x9a, 0x16, 0x0, 0x90, 0x27, 0x3f, 0xc1, 0x4d )
+#define SMBIOS3_TABLE_GUID \
+ EFI_GUID( 0xf2fd1544, 0x9794, 0x4a2c, 0x99, 0x2e, 0xe5, 0xbb, 0xcf, 0x20, 0xe3, 0x94 )
+
#define SAL_SYSTEM_TABLE_GUID \
EFI_GUID( 0xeb9d2d32, 0x2d88, 0x11d3, 0x9a, 0x16, 0x0, 0x90, 0x27, 0x3f, 0xc1, 0x4d )
@@ -805,7 +808,8 @@ extern struct efi {
unsigned long mps; /* MPS table */
unsigned long acpi; /* ACPI table (IA64 ext 0.71) */
unsigned long acpi20; /* ACPI table (ACPI 2.0) */
- unsigned long smbios; /* SM BIOS table */
+ unsigned long smbios; /* SM BIOS table (32 bit entry point) */
+ unsigned long smbios3; /* SM BIOS table (64 bit entry point) */
unsigned long sal_systab; /* SAL system table */
unsigned long boot_info; /* boot info table */
unsigned long hcdp; /* HCDP table */
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-efi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
