Replace reference to pm_power_off (which is an implementation detail) and replace it with a more generic description of the driver's functionality. Cc: Rob Herring <robh+dt@xxxxxxxxxx> Cc: Pawel Moll <pawel.moll@xxxxxxx> Cc: Mark Rutland <mark.rutland@xxxxxxx> Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx> --- Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt b/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt index af25e77..1e2260a 100644 --- a/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt +++ b/Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt @@ -3,8 +3,8 @@ QNAP NAS devices have a microcontroller controlling the main power supply. This microcontroller is connected to UART1 of the Kirkwood and Orion5x SoCs. Sending the character 'A', at 19200 baud, tells the -microcontroller to turn the power off. This driver adds a handler to -pm_power_off which is called to turn the power off. +microcontroller to turn the power off. This driver installs a handler +to power off the system. Synology NAS devices use a similar scheme, but a different baud rate, 9600, and a different character, '1'. -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-efi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
