I have been struggling with Linux drivers for the above mentioned card. Doing an lspci -v reports:
03:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCIVideo and Audio Decoder (rev 02) Subsystem: Hauppauge computer works Inc. Device 71d3 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at ef800000 (64-bit, non-prefetchable) [size=2M] Capabilities: [40] Express Endpoint, MSI 00 Capabilities: [80] Power Management version 2 Capabilities: [90] Vital Product Data Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [100] Advanced Error Reporting Capabilities: [200] Virtual Channel <?> Kernel driver in use: cx23885 Kernel modules: cx23885
I have been googling a lot and I am somewhat confused if the current driverssupports video capture on the S-Video connector. Most mailing list entriessay that only digital capture is possible, however I did notice somechanges in the cx23885-cards.c:
[CX23885_BOARD_HAUPPAUGE_HVR1200] = { .name = "Hauppauge WinTV-HVR1200", .portc = CX23885_MPEG_DVB, .input = {{ .type = CX23885_VMUX_TELEVISION, .vmux = 0, .gpio0 = 0xff00, }, { .type = CX23885_VMUX_DEBUG, .vmux = 0, .gpio0 = 0xff01, }, { .type = CX23885_VMUX_COMPOSITE1, .vmux = 1, .gpio0 = 0xff02, }, { .type = CX23885_VMUX_SVIDEO, .vmux = 2, .gpio0 = 0xff02, } }, },
Which sort of indicates that the driver is aware of the connector. Cananybody help me what is the current status of this driver/card combination?
-- Lars_______________________________________________linux-dvb users mailing listFor V4L/DVB development, please use instead linux-media@xxxxxxxxxxxxxxxxxxxxxxxx@linuxtv.orghttp://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
