First post so please be gentle :-)
I was wondering if anyone can help me please - I am trying to get a DVB-S PCI card working with Linux (Ubuntu 9.04). So far I can get the card recognised by Linux, but it won't tune - Kaffeine does tell me that there is 95% signal and 80% SNR, and I am using the same frequencies etc that a standard Sky box uses.
The card is very common on eBay so I am sure there are plenty people who have tried this / would want this working.
Some details that I hope will help someone who knows more than I do about this!
The card is one of these:
lspci:
03:09.0 Ethernet controller: Device 195d:1105 (rev 10)
My dmesg output - looks ok?:
$ dmesg | grep DVB [ 12.174738] DVB: registering new adapter (dm1105) [ 12.839501] DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)... [ 12.839633] input: DVB on-card IR receiver as /devices/pci0000:00/0000:00:1e.0/0000:03:09.0/input/input
My output from scan - the problem:
$ sudo scan -vvvvvv /usr/share/dvb/dvb-s/Astra-28.2E scanning /usr/share/dvb/dvb-s/Astra-28.2E using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' >>> tune to: 11778:v:0:27500 DiSEqC: switch pos 0, 13V, hiband (index 2) diseqc_send_msg:56: DiSEqC: e0 10 38 f1 00 00 DVB-S IF freq is 1178000 >>> tuning status == 0x03 >>> tuning status == 0x03 >>> tuning status == 0x03 >>> tuning status == 0x03 >>> tuning status == 0x03 >>> tuning status == 0x03 >>> tuning status == 0x03 >>> tuning status == 0x03 >>> tuning status == 0x03 >>> tuning status == 0x03 WARNING: >>> tuning failed!!!
This is the correct satellite for my location (south UK), I believe. Have tried plenty. Nothing locks.
I'm using the latest liplianin drivers - did a mercurial checkout and build today:
$ modinfo dm1105 filename: /lib/modules/2.6.28-13-server/kernel/drivers/media/dvb/dm1105/dm1105.ko license: GPL description: SDMC DM1105 DVB driver author: Igor M. Liplianin <liplianin@xxxxx> srcversion: 46C1B3C3627D1937F75D732 alias: pci:v0000195Dd00001105sv*sd*bc*sc*i* alias: pci:v0000109Fd0000036Fsv*sd*bc*sc*i* depends: ir-common,dvb-core vermagic: 2.6.28-13-server SMP mod_unload modversions parm: card:card type (array of int) parm: ir_debug:enable debugging information for IR decoding (int) parm: adapter_nr:DVB adapter numbers (array of short)
Have also tried the latest v4l-dvb drivers and get exactly the same tuning problems.
Finally, dvbtune appears to say I have signal but cannot lock:
$ sudo dvbtune -f 1177800 -s 27500 -p v -m -tone 1 -vvvvvvvvvvv [sudo] password for shaun: Using DVB card "ST STV0299 DVB-S" tuning DVB-S to L-Band:0, Pol:V Srate=27500000, 22kHz=on polling.... Getting frontend event FE_STATUS: polling.... Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER FE_HAS_VITERBI polling.... Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER polling.... Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER FE_HAS_VITERBI polling.... Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER polling.... Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER FE_HAS_VITERBI polling.... Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER
So I am thinking that this could be a driver issue? If the card has good signal and SNR in Kaffeine, and dvbtune says it has signal and carrier - but cannot lock?
Please can someone help me debug this?
Thanks a lot!
Shaun
_______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media@xxxxxxxxxxxxxxx linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
