Hi folks. Sorry but I'm unable to reply to my previous message, because I just don't have this message. Now I'm registered to both lists... I "played" a little bit with my problem and tried the latest source from the repository, but EOVERFLOW still occurs seconds after starting vdr. I activated the debug options of all, I hope, relevant modules now and got a more detailed kern.log. Maybe some expert can help me and take look at it. Interesting section: Jun 1 23:16:14 vdr kernel: function : dvb_dvr_poll Jun 1 23:16:14 vdr kernel: function : dvb_dvr_poll Jun 1 23:16:14 vdr kernel: function : dvb_dvr_poll Jun 1 23:16:14 vdr kernel: dmxdev: section callback 4e f2 6c 40 0a e7 Jun 1 23:16:14 vdr kernel: dmxdev: section callback 50 f2 55 40 13 e1 Jun 1 23:16:14 vdr kernel: dmxdev: section callback 00 b0 1d 03 01 d1 Jun 1 23:16:14 vdr kernel: stop pid: 0x00a0, feedtype: 1 Jun 1 23:16:14 vdr kernel: setting pid (no): 160 00a0 at index 7 'off' Jun 1 23:16:14 vdr kernel: function : dvb_dmxdev_filter_set Jun 1 23:16:14 vdr kernel: start pid: 0x00e0, feedtype: 1 Jun 1 23:16:14 vdr kernel: setting pid (no): 224 00e0 at index 7 'on' Jun 1 23:16:14 vdr kernel: function : dvb_dvr_poll Jun 1 23:16:14 vdr kernel: function : dvb_dvr_poll BOOM -> Jun 1 23:16:14 vdr kernel: urb completition error -75. The whole logfile is available here: http://www.retrodesignfan.eu/dvb/dib0700-usb-hangup.log Greetings, Marco Borm Marco Borm wrote: > Hi folks, > > yesterday I bought a Terratec Cinergy DT USB XS Diversity and the > device works just plug&play and without problems under Windows AND > linux mplayer+ tzap but resets the whole USB bus very shortly after I > starting vdr. I don't think this has something to do with vdr itself, > so I posting here. > > My configuration is Debian on testing, kernel is > 2.6.29-4.slh.1-sidux-686, DVB drivers aren't self compiled, vdr is > "(1.6.0-2/1.6.0)", device info: ID 0ccd:0081 TerraTec Electronic GmbH. > log entries: > Jun 1 01:14:47 vdr kernel: dib0700: loaded with support for 8 > different device-types > Jun 1 01:14:47 vdr kernel: dvb-usb: found a 'Terratec Cinergy DT USB > XS Diversity' in warm state. > Jun 1 01:14:47 vdr kernel: dvb-usb: will pass the complete MPEG2 > transport stream to the software demuxer. > Jun 1 01:14:47 vdr kernel: DVB: registering new adapter (Terratec > Cinergy DT USB XS Diversity) > Jun 1 01:14:47 vdr kernel: DVB: registering adapter 1 frontend 0 > (DiBcom 7000PC)... > Jun 1 01:14:47 vdr kernel: DiB0070: successfully identified > Jun 1 01:14:47 vdr kernel: dvb-usb: will pass the complete MPEG2 > transport stream to the software demuxer. > Jun 1 01:14:47 vdr kernel: DVB: registering new adapter (Terratec > Cinergy DT USB XS Diversity) > Jun 1 01:14:47 vdr kernel: DVB: registering adapter 2 frontend 0 > (DiBcom 7000PC)... > Jun 1 01:14:47 vdr kernel: DiB0070: successfully identified > Jun 1 01:14:47 vdr kernel: dvb-usb: Terratec Cinergy DT USB XS > Diversity successfully initialized and connected. > Jun 1 01:14:47 vdr kernel: usbcore: registered new interface driver > dvb_usb_dib0700 > vdr start -> Jun 1 01:16:24 vdr logger: runvdr get_modulenames: > dvb_usb#012videobuf_dvb#012cx88_dvb dvb_core > USB reset -> Jun 1 01:18:00 vdr kernel: usb 1-2: USB disconnect, [... > all devices reconnecting to the bus ....] > Jun 1 01:18:28 vdr kernel: DiB0070 I2C write failed > Jun 1 01:18:28 vdr kernel: DiB0070 I2C read failed > Jun 1 01:18:28 vdr kernel: DiB0070 I2C write failed > Jun 1 01:18:28 vdr kernel: DiB0070 I2C write failed > Jun 1 01:18:28 vdr kernel: DiB0070 I2C write failed > [...] > > This logs aren't very helpful, but I find something interesting with > Wireshark and usbmon: > device -> host > URB type: URB_COMPLETE ('C') > URB transfer type: URB_BULK (3) > Endpoint: 0x83 > Device: 13 > Data: present (0) > URB status: Value too large for defined data type (-EOVERFLOW) (-75) > URB length [bytes]: 39424 > Data length [bytes]: 39424 > > after this URB I get a "URB transfer type: URB_INTERRUPT (1)" and all > goes to hell. > > Its also interesting that the URB+data length in the failure package > is 39424 but "URB length [bytes]: 39480" in every package before that. > > As I know this device works without problems under linux for other > people, so I'm wondering why. I searched but found nothing about such > a problem. > > The wireshark capturefile is downloadable here: > http://rapidshare.com/files/239429647/terratec-xs-usb-overflow.html > > > Thanks for hints, > Marco Borm > _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media@xxxxxxxxxxxxxxx linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
