2009/4/11 Hartmut <spieluhr@xxxxxxxxxx>: > I tried the multiproto-driver first and had not very good results. This > driver is out for some month. I installed then the liplianin-driver via hg > clone as shown at the following page: > > http://www.linuxtv.org/wiki/index.php/Azurewave_AD_SP400_CI_(VP-1041)#Drivers > > That worked at once. > > lspci: > 00:09.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV PCI > Bridge Controller [Ver 1.0] (rev 01) > Subsystem: Device 1ae4:0003 > Flags: bus master, medium devsel, latency 32, IRQ 17 > Memory at fb000000 (32-bit, prefetchable) [size=4K] > Kernel driver in use: Mantis > Kernel modules: mantis > > dmesg: > mantis stop feed and dma > stb6100_set_bandwidth: Bandwidth=51610000 > stb6100_get_bandwidth: Bandwidth=52000000 > stb6100_get_bandwidth: Bandwidth=52000000 > stb6100_set_frequency: Frequency=1944000 > stb6100_get_frequency: Frequency=1944000 > stb6100_get_bandwidth: Bandwidth=52000000 > mantis start feed & dma > Well, it seems we have the same exact card (HW revision), but it did not work with liplianin in my setup. It works for you, that's why I was asking about the components in your setup. I really need to know your kernel version + its distrib. revision ("cat /proc/version") and the revision of your working liplianin copy ("cd your-liplianin-source; hg log | head"). My setup: Linux version 2.6.26-1-686 (Debian 2.6.26-9) (waldi@xxxxxxxxxx) liplianin-s2: 11145:2866ecb5e66b (Sun Mar 15 18:24:26 2009) Be quite grateful if you could furnish me with this basic info. Don't forget to "CC: linux-dvb@xxxxxxxxxxx" when replying to me. :) Best regards, -- David Lister _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media@xxxxxxxxxxxxxxx linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
