Hello rvf16, On Thu, 09 Apr 2009 17:05:36 +0300 rvf16 <rvf16@xxxxxxxx> wrote: > Hello. > > I am trying to use two Terratec Cinergy Hybrid T USB XS FM tuners, at > the same time, on the same system. > Both work great when used solely. > When used simultaneously the second one gives the following error : > > v4l2: unable to open '/dev/video1': No space left on device > > I am using the em28xx-new-b2e841c05e94 driver from > http://mcentral.de/hg/~mrec/em28xx-new on a Fedora 6 system. > I have opened this topic in the em28xx mailing list > http://mcentral.de/pipermail/em28xx/ but it seems it is not > maintained any more. > > According to comments on relevant problems (the following is for > spca5xx driver for cameras with same problem) : > ----------------------- > When other USB devices are present on the same host controller bus as > the camera, the bandwidth requirements of the spca5xx driver are not > being met, with some hardware configurations. > The spca5xx driver is asking for more bandwidth than is available > which results in these error messages. > ----------------------- > > We are, under these circumstances, advised to either insert the > device in another USB socket or even install a PCI card with extra > USB sockets so that the device ends up in different bus. > I tried to insert the second device in another usb socket but it > always ends up at the same bus with the first one : > > #lsusb > Bus 005 Device 014: ID 0ccd:0072 TerraTec Electronic GmbH > Bus 005 Device 015: ID 0ccd:0072 TerraTec Electronic GmbH > Bus 005 Device 001: ID 0000:0000 Bus 002 Device 006: ID 046d:c50e > Logitech, Inc. MX-1000 Cordless Mouse Receiver > Bus 002 Device 001: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus > 003 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 > which happens to a lot of people from what i have seen. > > As this is a laptop with 4 USB sockets : > > # lspci | grep USB > 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB > UHCI #1 (rev 01) > 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB > UHCI #2 (rev 01) > 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB > UHCI #3 (rev 01) > 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB > UHCI #4 (rev 01) > 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 > EHCI Controller (rev 01) > > i cannot install a PCI card with extra USB sockets so there goes > workaround number two. > > In spca5xx case a developer patched the driver so that the bandwidth > was throttled in such a way that two devices used simultaneously > would never exceed maximum. > > Can that be done with em28xx? > If not, is there any other workaround to this problem? Please use upstream repository, we do not support sources from http://mcentral.de/hg/~mrec/em28xx-new this is a parallel project. For additional info how to download upstream tree see: http://www.linuxtv.org/wiki/index.php/How_to_Obtain%2C_Build_and_Install_V4L-DVB_Device_Drivers Cheers, Douglas _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media@xxxxxxxxxxxxxxx linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
