Hi >> > > Hi, >> > > Am Donnerstag, den 09.10.2008, 22:15 +0200 schrieb klaas de waal: >> > > The table starts a new segment at 390MHz, >> > > > it then starts to use VCO2 instead of VCO1. >> > > > I have now (hack, hack) changed the segment start from 390 to 395MHz >> > > > so that the 388MHz is still tuned with VCO1, and this works OK!! > > TechnoTrend C-1501 DVB-C card does not lock on 388MHz. > I assume that existing frequency table is valid for DVB-T. This is suggested > by the name of the table: tda827xa_dvbt. > Added a table for DVB-C with the name tda827xa_dvbc. > Added runtime selection of the DVB-C table when the tuner is type FE_QAM. > This should leave the behaviour of this driver with with DVB_T tuners > unchanged. > This modification is in file tda827x.c I imagine if there´s something similar to my card, as it doesnt seem to use the same tuner. dmesg only says this: [ 3.611107] Linux video capture interface: v2.00 [ 3.621431] saa7146: register extension 'budget_av'. [ 3.621513] budget_av 0000:00:00.0: enabling device (0000 -> 0002) [ 3.621757] saa7146: found saa7146 @ mem ffffc20000024000 (revision 1, irq 16) (0x1894,0x0022). [ 3.621768] saa7146 (0): dma buffer size 192512 [ 3.621773] DVB: registering new adapter (KNC1 DVB-C MK3) [ 3.655279] adapter failed MAC signature check [ 3.655292] encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff [ 3.858310] budget_av: saa7113_init(): saa7113 not found on KNC card [ 3.918489] KNC1-0: MAC addr = 00:09:d6:6d:9f:db [ 4.112763] DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)... [ 4.112896] budget-av: ci interface initialised. What tunner this card use? -- Christian Lyra PoP-PR/RNP _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media@xxxxxxxxxxxxxxx linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
