Hello! I have a DVBT USB DONGLE :-) I have opened the device and I have found 2 chip: EC168 e MXL5003S. I don't know the name of the model, but with lsusb I find: ---------------------------- Bus 001 Device 006: ID 18b4:1001 ---------------------------- I'm trying to use DVBT USB DONGLE on Debian stable 5.0 Lenny with kernel: uname -r 2.6.26-1-486 But, I would like know if it is possible to use it whit a kernel 2.6.26 I'm based on this links: https://www.dealextreme.com/forums/Default.dx/sku.8309~threadid.244152 http://tanguy.ath.cx/index.php?q=EC168 https://www.dealextreme.com/forums/Default.dx/sku.8325~threadid.278942 I have downloaded and compiled driver from: http://linuxtv.org/hg/~anttip/ec168/ than put firmware dvb-usb-ec168.fw in /lib/firmware. and launched as administrator after I had inserted the DVBT: insmod dvb-core.ko insmod dvb-usb.ko insmod ec100.ko insmod mxl5005s.ko insmod dvb-usb-ec168.ko from folder /ec168-2/v4l/: I copy my terminal: ------------------------------------------------- debian01:/home/alessandra/Desktop# cd ec168-ebac4965f512/ debian01:/home/alessandra/Desktop/ec168-ebac4965f512# cd v4l debian01:/home/alessandra/Desktop/ec168-ebac4965f512/v4l# insmod dvb-core.ko insmod: error inserting 'dvb-core.ko': -1 File exists debian01:/home/alessandra/Desktop/ec168-ebac4965f512/v4l# insmod dvb-usb.ko insmod: error inserting 'dvb-usb.ko': -1 File exists debian01:/home/alessandra/Desktop/ec168-ebac4965f512/v4l# insmod ec100.ko debian01:/home/alessandra/Desktop/ec168-ebac4965f512/v4l# insmod mxl5005s.ko debian01:/home/alessandra/Desktop/ec168-ebac4965f512/v4l# insmod dvb-usb-ec168.ko insmod: error inserting 'dvb-usb-ec168.ko': -1 File exists debian01:/home/alessandra/Desktop/ec168-ebac4965f512/v4l# ------------------------------------------------- Here, some commands: dmesg: ------------------------------------------------ [ 4922.152074] usb 1-2: new full speed USB device using ohci_hcd and address 6 [ 4922.355997] usb 1-2: configuration #1 chosen from 1 choice [ 4922.374877] input: HID 18b4:1001 as /class/input/input8 [ 4922.400293] input,hidraw0: USB HID v1.11 Keyboard [HID 18b4:1001] on usb-0000:00:07.4-2 [ 4922.405091] dvb-usb: found a 'E3C EC168 DVB-T USB2.0 reference design' in cold state, will try to load a firmware [ 4922.405114] firmware: requesting dvb-usb-ec168.fw [ 4922.497395] dvb-usb: downloading firmware from file 'dvb-usb-ec168.fw' [ 4922.573079] dvb-usb: found a 'E3C EC168 DVB-T USB2.0 reference design' in warm state. [ 4922.573279] i2c-adapter i2c-1: SMBus Quick command not supported, can't probe for chips [ 4922.573293] dvb-usb: This USB2.0 device cannot be run on a USB1.1 port. (it lacks a hardware PID filter) [ 4922.573358] dvb-usb: E3C EC168 DVB-T USB2.0 reference design error while loading driver (-19) [ 4922.573572] usb 1-2: New USB device found, idVendor=18b4, idProduct=1001 [ 4922.573584] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 ------------------------------------------------ lsmod: ------------------------------------------------ debian01:/home/alessandra/Desktop/ec168-ebac4965f512/v4l# lsmod Module Size Used by mxl5005s 32516 0 ec100 3712 0 dvb_usb_ec168 8068 0 dvb_usb 17164 1 dvb_usb_ec168 dvb_core 73728 1 dvb_usb usbhid 35712 0 hid 32128 1 usbhid firmware_class 6656 1 dvb_usb ff_memless 4232 1 usbhid nls_utf8 1792 0 nls_cp437 5504 0 vfat 8960 0 fat 40220 1 vfat nls_base 6528 4 nls_utf8,nls_cp437,vfat,fat sd_mod 22032 0 usb_storage 75840 0 dmfe 16408 0 binfmt_misc 7176 1 tdfx 2176 2 drm 64672 3 tdfx ppdev 6404 0 lp 7972 0 cpufreq_stats 3076 0 cpufreq_ondemand 6036 0 freq_table 4100 2 cpufreq_stats,cpufreq_ondemand cpufreq_powersave 1792 0 cpufreq_userspace 2968 0 cpufreq_conservative 5664 0 ipv6 225172 18 dm_snapshot 14240 0 dm_mirror 14720 0 dm_log 8192 1 dm_mirror dm_mod 45384 3 dm_snapshot,dm_mirror,dm_log eeprom 5264 0 w83781d 25768 0 hwmon_vid 2560 1 w83781d adm1021 10160 0 i2c_matroxfb 3840 0 i2c_algo_bit 5124 1 i2c_matroxfb matroxfb_base 24540 1 i2c_matroxfb matroxfb_DAC1064 9472 1 matroxfb_base matroxfb_accel 3840 1 matroxfb_base matroxfb_Ti3026 5120 1 matroxfb_base matroxfb_g450 6016 1 matroxfb_base g450_pll 5376 2 matroxfb_DAC1064,matroxfb_g450 matroxfb_misc 7936 6 i2c_matroxfb,matroxfb_base,matroxfb_DAC1064,matroxfb_Ti3026,matroxfb_g450,g450_pll loop 12428 0 parport_pc 22436 1 parport 30408 3 ppdev,lp,parport_pc button 6032 0 psmouse 32016 0 snd_ens1371 18720 0 gameport 10504 1 snd_ens1371 snd_seq_midi 5664 0 snd_seq_midi_event 6528 1 snd_seq_midi snd_rawmidi 18592 2 snd_ens1371,snd_seq_midi serio_raw 4740 0 snd_ac97_codec 88228 1 snd_ens1371 ac97_bus 1664 1 snd_ac97_codec snd_pcm 60680 2 snd_ens1371,snd_ac97_codec snd_seq 40784 2 snd_seq_midi,snd_seq_midi_event snd_timer 17668 2 snd_pcm,snd_seq snd_seq_device 6412 3 snd_seq_midi,snd_rawmidi,snd_seq snd 44964 7 snd_ens1371,snd_rawmidi,snd_ac97_codec,snd_pcm,snd_seq,snd_timer,snd_seq_device i2c_amd756 5124 0 soundcore 6112 1 snd i2c_core 19728 9 mxl5005s,ec100,dvb_usb,eeprom,w83781d,adm1021,i2c_matroxfb,i2c_algo_bit,i2c_amd756 snd_page_alloc 7816 1 snd_pcm shpchp 25496 0 pci_hotplug 23204 1 shpchp pcspkr 2304 0 amd_k7_agp 6028 1 agpgart 28336 2 drm,amd_k7_agp evdev 7808 5 ext3 103688 5 jbd 35092 1 ext3 mbcache 6656 1 ext3 raid10 18176 0 raid456 115216 0 async_xor 3456 1 raid456 async_memcpy 2176 1 raid456 async_tx 5960 3 raid456,async_xor,async_memcpy xor 14728 2 raid456,async_xor raid1 17664 0 raid0 6272 0 multipath 6016 0 linear 4480 0 md_mod 65940 6 raid10,raid456,raid1,raid0,multipath,linear ide_cd_mod 27652 0 cdrom 30240 1 ide_cd_mod ide_disk 10496 7 ata_generic 4612 0 libata 141088 1 ata_generic scsi_mod 129804 3 sd_mod,usb_storage,libata dock 8076 1 libata ide_pci_generic 3844 0 [permanent] floppy 47620 0 ohci_hcd 18436 0 amd74xx 7688 0 [permanent] usbcore 117616 6 dvb_usb_ec168,dvb_usb,usbhid,usb_storage,ohci_hcd ide_core 95144 4 ide_cd_mod,ide_disk,ide_pci_generic,amd74xx thermal 15132 0 processor 28080 1 thermal fan 4100 0 thermal_sys 10784 3 thermal,processor,fan ------------------------------------------------ lsusb -v -d "18b4:1001" ------------------------------------------------ debian01:/home/alessandra/Desktop/ec168-ebac4965f512/v4l# lsusb -v -d "18b4:1001" Bus 001 Device 006: ID 18b4:1001 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x18b4 idProduct 0x1001 bcdDevice 0.02 iManufacturer 0 iProduct 0 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 50 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 1 Keyboard iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.11 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 63 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) mal_sys 10784 3 thermal,processor,fan ------------------------------------------------ ..... but with scan -c: :-( ------------------------------------------------ debian01:/home# scan -c using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' main:2273: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 2 No such file or directory ------------------------------------------------ where is my error? thank for the attention and the possible help. ciao! Ale.a _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media@xxxxxxxxxxxxxxx linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
