> moi Jo! > > bloehei wrote: > > Hi, > > I'm reading this list because I'm - like many others I guess - waiting > > for my EC168 based Sinovideo 3420b to be supported under linux. Now I've > > read this > > (https://www.dealextreme.com/forums/Default.dx/sku.8325~threadid.278942) > > post and was supprised that there already is some code that seems to be > > working for some other EC168 sticks. Sadly, it doesn't work for my > > device. I want to thank Antti Palosaari for the work on the driver and > > suggest, that it should be communicated more clearly that there already > > is a code base for a driver. > > It is ugly few hour hack driver which I did when I tried to order Intel > ce6230 based stick but got E3C ec168 one. > Anyhow, it seems to work with 8 MHz bandwidth. I think you have 6 or 7 > MHz? It is rather easy to add 6 and 7 too, just take usb-sniff and look > registers programmed differently. > Are you using 6 or 7 MHz? > > regards > Antti For me, the firmware doesn't get loaded, so I don't get that far. But I'm not posting because I expect this to be fixed for my stick now, I'm just happy that there is development going on at all, so that my device could be supported some day. I think it should be made known better, that there is some basic code, that's why I was posting. If it is of interest, here's my system log: > usb 1-1: new full speed USB device using uhci_hcd and address 2 > usb 1-1: configuration #1 chosen from 1 choice > ec168_probe: interface:0 > ec168_identify_state: > c0 01 00 00 01 00 01 00 <<< 00 > ec168_identify_state: reply:00 > dvb-usb: found a 'E3C EC168 DVB-T USB2.0 reference design' in cold state, > will try to load a firmware usb 1-1: firmware: requesting dvb-usb-ec168.fw > dvb-usb: downloading firmware from file 'dvb-usb-ec168.fw' > ec168_download_firmware: > 40 00 00 00 00 00 00 08 >>> 02 13 e4 02 0e d3 00 00 00 00 00 02 14 f7 00 00 > 00 <... cut ...> > 40 00 00 00 40 08 00 08 >>> 12 0c 93 80 06 12 0d 43 74 83 f0 e5 48 30 e3 78 > 54 30 60 1d <... cut ...> > 40 00 00 00 40 08 00 08 >>> 12 0c 93 80 06 12 0d 43 74 83 f0 e5 48 30 e3 78 > 54 30 60 1d 12 09 2d e0 12 0c 7f a3 f0 e5 48 <....cut....> > 40 00 00 00 40 08 c5 03 >>> 12 0c 93 80 06 12 0d 43 74 83 f0 e5 48 30 e3 78 > 54 30 60 1d 12 09 2d e0 <...cut...> > 40 01 00 00 01 00 00 00 >>> > 40 04 01 00 08 00 00 00 >>> > ec168_rw_udev: usb_control_msg failed :-75 > 40 04 00 00 06 02 00 00 >>> > ec168_rw_udev: usb_control_msg failed :-71 > init failed :-71 > dvb_usb_ec168: probe of 1-1:1.0 failed with error -71 > ec168_probe: interface:1 > set interface failed > ec168_identify_state: > c0 01 00 00 01 00 01 00 <<< 00 > ec168_rw_udev: usb_control_msg failed :-71 If I can help with more informations or tests, just let me know. Regards, Jo _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media@xxxxxxxxxxxxxxx linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
