Hello, I bought the TV card in the object, it is a PCI hybrid TV-card, both analogue and DVB-T. I bought it, because on the manufacturer site they said they develop a linux driver, unfortunately when I downloaded the driver (which claims to be for fedora) I found the whole V4L tree to be compiled. By the way, I tried to compiled it but it failed 'because it looked for the 2.6.19 kernel sources while I'm on Ubuntu Intrepid with a 2.6.27. So I downloaded the v4l tree from HG, compiled and installed it, but this time was the firmware that was missing. I followed the instruction to get the firmware for the xc3028 from here > http://www.steventoth.net/linux/xc5000/HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip and everything seemed to be perfect... but the tuner wasn't able to detect anything. I tried "w_scan", since there was not a freq table for my town, but it didn't find anything and dmesg reported the following error repeated: > [ 4982.520836] zl10353: write to reg 6c failed (err = -6)! > [ 4982.521593] zl10353: write to reg 6d failed (err = -6)! > [ 4982.522337] zl10353: write to reg 6e failed (err = -6)! > [ 4982.523079] zl10353: write to reg 6f failed (err = -6)! > [ 4982.523822] zl10353: write to reg 5f failed (err = -6)! > [ 4982.524565] zl10353: write to reg 71 failed (err = -6)! > [ 4982.614090] zl10353_read_register: readreg error (reg=6, ret==-6) > [ 4982.614847] zl10353_read_register: readreg error (reg=10, ret==-6) > [ 4982.615591] zl10353_read_register: readreg error (reg=11, ret==-6) > [ 4982.616817] zl10353_read_register: readreg error (reg=16, ret==-6) > [ 4982.617509] zl10353_read_register: readreg error (reg=17, ret==-6) > [ 4982.618446] zl10353_read_register: readreg error (reg=18, ret==-6) > [ 4982.619373] zl10353_read_register: readreg error (reg=19, ret==-6) > [ 4982.620273] zl10353_read_register: readreg error (reg=20, ret==-6) > [ 4982.621134] zl10353_read_register: readreg error (reg=21, ret==-6) > [ 4982.821710] zl10353_read_register: readreg error (reg=6, ret==-6) > [ 4982.822474] zl10353_read_register: readreg error (reg=10, ret==-6) > [ 4982.823338] zl10353_read_register: readreg error (reg=11, ret==-6) > [ 4982.824062] zl10353_read_register: readreg error (reg=16, ret==-6) > [ 4982.824877] zl10353_read_register: readreg error (reg=17, ret==-6) > [ 4982.825589] zl10353_read_register: readreg error (reg=18, ret==-6) > [ 4982.826601] zl10353_read_register: readreg error (reg=19, ret==-6) > [ 4982.827463] zl10353_read_register: readreg error (reg=20, ret==-6) > [ 4982.828180] zl10353_read_register: readreg error (reg=21, ret==-6) I also tried scantv for analogue broadcast, but there wat a sign of the analogue tuner work, too. And the output of dmesg this time was the following > [ 5458.532019] cx88[0]: Calling XC2028/3028 callback > [ 5459.008018] cx88[0]: Calling XC2028/3028 callback > [ 5459.484026] cx88[0]: Calling XC2028/3028 callback > [ 5459.960024] cx88[0]: Calling XC2028/3028 callback > [ 5460.448073] cx88[0]: Calling XC2028/3028 callback > [ 5460.928071] cx88[0]: Calling XC2028/3028 callback > [ 5461.408074] cx88[0]: Calling XC2028/3028 callback This is the output of dmesg at startup: [ 13.929094] tuner' 1-0061: chip found @ 0xc2 (cx88[0]) [ 14.185029] xc2028 1-0061: creating new instance [ 14.185036] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner [ 14.185048] cx88[0]: Asking xc2028/3028 to load firmware xc3028-v27.fw [ 14.185071] cx88[0]/2: cx2388x 8802 Driver Manager [ 14.185121] cx88-mpeg driver manager 0000:00:0a.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 14.185141] cx88[0]/2: found at 0000:00:0a.2, rev: 5, irq: 18, latency: 32, mmio: 0xfa000000 [ 14.185507] cx8800 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 14.185521] cx88[0]/0: found at 0000:00:0a.0, rev: 5, irq: 18, latency: 32, mmio: 0xf8000000 [ 14.185753] cx88[0]/0: registered device video0 [v4l2] [ 14.185835] cx88[0]/0: registered device vbi0 [ 14.185902] cx88[0]/0: registered device radio0 [ 14.185967] firmware: requesting xc3028-v27.fw [ 14.733493] cx2388x alsa driver version 0.0.6 loaded [ 16.747916] xc2028 1-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [ 16.748129] cx88[0]: Calling XC2028/3028 callback [ 16.946586] xc2028 1-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. [ 16.946596] cx88[0]: Calling XC2028/3028 callback [ 18.146493] xc2028 1-0061: Loading firmware for type=MTS (4), id 000000000000b700. [ 18.163073] xc2028 1-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700. [ 18.224014] cx88[0]: Calling XC2028/3028 callback [ 18.346316] EMU10K1_Audigy 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 18.381388] cx88/2: cx2388x dvb driver version 0.0.6 loaded [ 18.381396] cx88/2: registering cx8802 driver, type: dvb access: shared [ 18.381403] cx88[0]/2: subsystem: 14f1:8852, board: Geniatech X8000-MT DVBT [card=63] [ 18.381409] cx88[0]/2: cx2388x based DVB/ATSC card [ 18.381415] cx8802_alloc_frontends() allocating 1 frontend(s) [ 18.411681] cx88_audio 0000:00:0a.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 18.411734] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards [ 18.414562] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 [ 18.414574] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22 [ 18.414733] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 [ 18.439808] xc2028 1-0061: attaching existing instance [ 18.439814] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner [ 18.439817] cx88[0]/2: xc3028 attached [ 18.439825] DVB: registering new adapter (cx88[0]) [ 18.439830] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)... [omissis] [ 34.207368] cx88[0]: Calling XC2028/3028 callback [ 34.405817] xc2028 1-0061: Loading firmware for type=BASE FM (401), id 0000000000000000. [ 34.405827] cx88[0]: Calling XC2028/3028 callback [ 35.646479] xc2028 1-0061: Loading firmware for type=FM (400), id 0000000000000000. [ 35.696021] cx88[0]: Calling XC2028/3028 callback and this is the output of lsmod (only relevant modules) ciencio@kinotto:~$ lsmod snd_emu10k1_synth 14464 0 snd_emux_synth 41344 1 snd_emu10k1_synth snd_seq_virmidi 13568 1 snd_emux_synth snd_seq_midi_emul 14592 1 snd_emux_synth zl10353 15752 1 cx88_dvb 28420 0 cx88_vp3054_i2c 10752 1 cx88_dvb snd_via82xx 32536 2 snd_emu10k1 146208 4 snd_emu10k1_synth snd_mpu401_uart 15360 1 snd_via82xx snd_ac97_codec 111652 2 snd_via82xx,snd_emu10k1 ac97_bus 9856 1 snd_ac97_codec snd_util_mem 12416 2 snd_emux_synth,snd_emu10k1 snd_hwdep 15236 2 snd_emux_synth,snd_emu10k1 snd_seq_dummy 10884 0 cx88_alsa 18824 1 snd_seq_oss 38528 0 snd_seq_midi 14336 0 snd_rawmidi 29824 4 snd_seq_virmidi,snd_emu10k1,snd_mpu401_uart,snd_seq_midi evdev 17696 7 snd_pcm_oss 46848 0 snd_mixer_oss 22784 1 snd_pcm_oss videobuf_dvb 15236 1 cx88_dvb snd_seq_midi_event 15232 3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi dvb_core 94336 2 cx88_dvb,videobuf_dvb snd_pcm 83204 5 snd_via82xx,snd_emu10k1,snd_ac97_codec,cx88_alsa,snd_pcm_oss snd_seq 57776 9 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event tuner_xc2028 30772 2 snd_seq_device 15116 8 snd_emu10k1_synth,snd_emux_synth,snd_emu10k1,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq tuner 36036 0 snd_timer 29960 3 snd_emu10k1,snd_pcm,snd_seq snd_page_alloc 16136 3 snd_via82xx,snd_emu10k1,snd_pcm snd 63268 28 snd_emux_synth,snd_seq_virmidi,snd_via82xx,snd_emu10k1,snd_mpu401_uart,snd_ac97_codec,snd_hwdep,cx88_alsa,snd_seq_oss,snd_rawmidi,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq,snd_seq_device,snd_timer cx8800 38456 0 fglrx 1813960 23 parport_pc 39204 1 parport 42604 3 ppdev,lp,parport_pc cx8802 23684 1 cx88_dvb pcspkr 10624 0 cx88xx 79144 4 cx88_dvb,cx88_alsa,cx8800,cx8802 i2c_viapro 15764 0 ir_common 56068 1 cx88xx 2c_algo_bit 14340 2 cx88_vp3054_i2c,cx88xx tveeprom 20356 1 cx88xx v4l2_common 23808 2 tuner,cx8800 videodev 49312 4 tuner,cx8800,cx88xx,v4l2_common i2c_core 31892 9 zl10353,cx88_vp3054_i2c,tuner_xc2028,tuner,cx88xx,i2c_viapro,i2c_algo_bit,tveeprom,v4l2_common v4l1_compat 21892 1 videodev videobuf_dma_sg 20612 5 cx88_dvb,cx88_alsa,cx8800,cx8802,cx88xx videobuf_core 26372 5 videobuf_dvb,cx8800,cx8802,cx88xx,videobuf_dma_sg btcx_risc 12552 4 cx88_alsa,cx8800,cx8802,cx88xx soundcore 15328 1 snd I can't understand what' wrong with that card. Is there anyone able to help me? -- ciencio -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media@xxxxxxxxxxxxxxx linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
