Hi out there I'm in the unfortunate position of having bought a 900H instead of a 900 and now I'm fiddling with the driver. Details: $ lsusb | grep Hauppauge Bus 008 Device 004: ID 2040:6600 Hauppauge My machine is running Ubuntu 8.10 with a 2.6.27-11-generic kernel. The correct kernel-headers are installed. As far as I've read there is (limited) support for the device with the tm6010 driver. Putting together some info from the web I did the following: $ hg clone http://linuxtv.org/hg/v4l-dvb $ cd v4l-dvb $ hg pull -u http://linuxtv.org/hg/~mchehab/tm6010 Inserted into v4l-dvb/v4l/.config three lines: CONFIG_VIDEO_TM6000_ALSA=m CONFIG_VIDEO_TM6000=m CONFIG_VIDEO_TM6000_DVB=m $ hg merge $ make and as root: # make install This far everything worked without error. Then I got the Firmware the card was requesting in the dmesg-output from http://steventoth.net/linux/hvr1400/xc3028L-v36.fw and copied it to /lib /firmware Since there is no Module tm6000 I did # modprobe -v tm6000 insmod /lib/modules/2.6.27-11-generic/kernel/drivers/media/video/videobuf-core.ko insmod /lib/modules/2.6.27-11-generic/kernel/drivers/media/video/videobuf-vmalloc.ko insmod /lib/modules/2.6.27-11-generic/kernel/drivers/i2c/i2c-core.ko insmod /lib/modules/2.6.27-11-generic/kernel/drivers/media/video/tm6000/tm6000.ko $ dmesg [ 187.646908] tm6000 v4l2 driver version 0.0.1 loaded [ 187.647898] usbcore: registered new interface driver tm6000 (tail /var/log/messages gives the same info) Now - as I hope the module is loaded correctly - I attacht the USB-Device: $ dmesg [ 373.881042] usb 8-1: new high speed USB device using ehci_hcd and address 3 [ 374.019648] usb 8-1: configuration #1 chosen from 1 choice [ 374.023090] tm6000: alt 0, interface 0, class 255 [ 374.023102] tm6000: alt 0, interface 0, class 255 [ 374.023107] tm6000: Bulk IN endpoint: 0x82 (max size=512 bytes) [ 374.023111] tm6000: alt 0, interface 0, class 255 [ 374.023116] tm6000: alt 1, interface 0, class 255 [ 374.023120] tm6000: ISOC IN endpoint: 0x81 (max size=3072 bytes) [ 374.023125] tm6000: alt 1, interface 0, class 255 [ 374.023129] tm6000: alt 1, interface 0, class 255 [ 374.023133] tm6000: alt 2, interface 0, class 255 [ 374.023137] tm6000: alt 2, interface 0, class 255 [ 374.023141] tm6000: alt 2, interface 0, class 255 [ 374.023145] tm6000: alt 3, interface 0, class 255 [ 374.023149] tm6000: alt 3, interface 0, class 255 [ 374.023153] tm6000: alt 3, interface 0, class 255 [ 374.023158] tm6000: New video device @ 480 Mbps (2040:6600, ifnum 0) [ 374.023162] tm6000: Found Hauppauge HVR-900H [ 374.884058] Error -32 while retrieving board version [ 375.184050] tm6000 #0: i2c eeprom 00: 01 59 54 45 12 01 00 02 00 00 00 40 40 20 00 66 .YTE.......@@ .f [ 375.380112] tm6000 #0: i2c eeprom 10: 69 00 10 20 40 01 02 03 48 00 79 00 62 00 72 00 i.. @...H.y.b.r. [ 375.572058] tm6000 #0: i2c eeprom 20: ff 00 64 ff ff ff ff ff ff ff ff ff ff ff ff ff ..d............. [ 375.764038] tm6000 #0: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 375.956103] tm6000 #0: i2c eeprom 40: 10 03 48 00 56 00 52 00 39 00 30 00 30 00 48 00 ..H.V.R.9.0.0.H. [ 376.148062] tm6000 #0: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 376.344055] tm6000 #0: i2c eeprom 60: 30 ff ff ff 0f ff ff ff ff ff 0a 03 32 00 2e 00 0...........2... [ 376.536039] tm6000 #0: i2c eeprom 70: 3f 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ?............... [ 376.728041] tm6000 #0: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 376.920041] tm6000 #0: i2c eeprom 90: 35 ff ff ff 16 03 34 00 30 00 33 00 32 00 31 00 5.....4.0.3.2.1. [ 377.112039] tm6000 #0: i2c eeprom a0: 33 00 35 00 33 00 39 00 39 00 00 00 00 00 ff ff 3.5.3.9.9....... [ 377.308054] tm6000 #0: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 377.500046] tm6000 #0: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 377.692053] tm6000 #0: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 377.885037] tm6000 #0: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 378.076042] tm6000 #0: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ [ 378.260374] ................ [ 378.260531] Trident TVMaster TM5600/TM6000 USB2 board (Load status: 0) [ 378.320709] Hack: enabling device at addr 0xc2 [ 378.320722] tuner' 0-0061: chip found @ 0xc2 (tm6000 #0) [ 378.362555] xc2028 0-0061: creating new instance [ 378.362566] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner [ 378.362817] Setting firmware parameters for xc2028 [ 378.362834] firmware: requesting xc3028L-v36.fw [ 378.395756] xc2028 0-0061: Loading 81 firmware images from xc3028L-v36.fw, type: xc2028 firmware, ver 3.6 [ 378.692036] xc2028 0-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. The device itself does not show any affection (LEDs stay dark), there is no directory /dev/dvb created and MeTV tells me it's not finding any reciever. What am I missing? Did I oversee anything conserning the driver-compilation? Or am I using the wrong firmware? Comments appreciated, David _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media@xxxxxxxxxxxxxxx linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
