I have this card and want to use the two DVB-T tuners. The machine runs F10/x86_64.
Which driver(s) handle(s) this card? I understood that it uses the saa7162.
I downloaded and built the package (work in progress) but it did not detect a thing.
Below are some relevant details and I am game to try and get it going as the machine
is not yet commissioned.
TIA
lspci
=====
01:00.0 Multimedia controller: Philips Semiconductors Pinnacle PCTV 3010iX Dual Analog + DVB-T (VT8251 Ultra VLINK Controller) (rev 01)
Subsystem: Avermedia Technologies Inc Device 011c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f3000000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [40] Message Signalled Interrupts: Mask- 64bit+ Count=1/32 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [50] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <64us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [74] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Vendor Specific Information <?>
Capabilities: [100] Vendor Specific Information <?>
lshal
=====
udi = '/org/freedesktop/Hal/devices/pci_1131_7162'
info.parent = '/org/freedesktop/Hal/devices/pci_8086_29c1' (string)
info.product = 'Unknown (0x7162)' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1131_7162' (string)
info.vendor = 'Philips Semiconductors' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0' (string)
pci.device_class = 4 (0x4) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 128 (0x80) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0' (string)
pci.product_id = 29026 (0x7162) (int)
pci.subsys_product_id = 284 (0x11c) (int)
pci.subsys_vendor = 'Avermedia Technologies Inc' (string)
pci.subsys_vendor_id = 5217 (0x1461) (int)
pci.vendor = 'Philips Semiconductors' (string)
pci.vendor_id = 4401 (0x1131) (int)
--
Eyal Lebedinsky (eyal@xxxxxxxxxxxxxx)
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@xxxxxxxxxxxxxxx
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
