Hi,
matthieu castet wrote:
matthieu castet wrote:
Hi Patrick,
Patrick Boettcher wrote:
Hi,
sorry for not answering ealier, recently I became the master of
postponing things. :(
On Thu, 29 Jan 2009, Mauro Carvalho Chehab wrote:
+/* 14 */ { USB_DEVICE(USB_VID_CYPRESS,
USB_PID_ULTIMA_TVBOX_USB2_FX_COLD) },
+#endif
It doesn't sound a very good approach the need of recompiling the
driver to
allow it to work with a broken card. The better would be to have
some modprobe
option to force it to accept a certain USB ID as a valid ID for the
card.
The most correct way would be to reprogram the eeprom, by simply
writing to 0xa0 (0x50 << 1) I2C address... There was a thread on the
linux-dvb some time ago.
BTW dibusb_i2c_xfer seems to do things very dangerous :
it assumes that it get only write/read request or write request.
That means that read can be understood as write. For example a program
doing
file = open("/dev/i2c-x", O_RDWR);
ioctl(file, I2C_SLAVE, 0x50)
read(file, data, 10)
will corrupt the eeprom as it will be understood as a write.
Patrick, any info about that.
I attach a possible (untested) patch.
Matthieu
Signed-off-by: Matthieu CASTET <castet.matthieu@xxxxxxx>
Index: linux-2.6/drivers/media/dvb/dvb-usb/dibusb-common.c
===================================================================
--- linux-2.6.orig/drivers/media/dvb/dvb-usb/dibusb-common.c 2009-02-09 20:36:03.000000000 +0100
+++ linux-2.6/drivers/media/dvb/dvb-usb/dibusb-common.c 2009-02-09 20:38:21.000000000 +0100
@@ -133,14 +133,18 @@
for (i = 0; i < num; i++) {
/* write/read request */
- if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) {
+ if (i+1 < num && (msg[i].flags & I2C_M_RD) == 0
+ && (msg[i+1].flags & I2C_M_RD)) {
if (dibusb_i2c_msg(d, msg[i].addr, msg[i].buf,msg[i].len,
msg[i+1].buf,msg[i+1].len) < 0)
break;
i++;
- } else
+ } else if ((msg[i].flags & I2C_M_RD) == 0) {
if (dibusb_i2c_msg(d, msg[i].addr, msg[i].buf,msg[i].len,NULL,0) < 0)
break;
+ }
+ else
+ break;
}
mutex_unlock(&d->i2c_mutex);
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@xxxxxxxxxxxxxxx
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
