Manu Abraham schrieb: > Ruediger Dohmhardt wrote: > >> Manu Abraham schrieb: >> >>> Have added initial support for this card, as well as a large >>> overhaul of the driver for a couple of performance impacts. >>> >>> Please do test with the latest updates from http://jusst.de/hg/mantis. >>> >>> >> Hi Manu >> the versions from January and February 2009 compile fine on the >> SUSE-11.1 kernel 2.6.27.7-9-default x86_64. >> The modules for my Twinhan AD-CP300 (2033) load fine, too. >> >> However, the devices below /dev/dvb are NOT created, and hence vdr-1.7 >> does not work. >> The card works with the s2-liplianin driver. >> >> I assume it is interrupt related as listed in the lines from >> /var/log/messages >> >> >> Feb 7 21:03:38 mt40 su: (to root) rudi on /dev/pts/1 >> Feb 7 21:03:48 mt40 kernel: vendor=1002 device=4371 >> Feb 7 21:03:48 mt40 kernel: Mantis 0000:02:01.0: PCI INT A -> GSI 21 >> (level, low) -> IRQ 21 >> Feb 7 21:03:48 mt40 kernel: DVB: registering new adapter (Mantis DVB >> adapter) >> Feb 7 21:03:48 mt40 kernel: vendor=1002 device=4371 >> Feb 7 21:03:48 mt40 kernel: Mantis 0000:02:01.0: PCI INT A disabled >> Feb 7 21:03:48 mt40 kernel: Mantis: probe of 0000:02:01.0 failed with >> error -1 >> Feb 7 21:05:03 mt40 vdr: [4320] cTimeMs: using monotonic clock >> (resolution is 1 ns) >> Feb 7 21:05:03 mt40 vdr: [4320] VDR version 1.7.0 started >> Feb 7 21:05:03 mt40 vdr: [4320] codeset is 'UTF-8' - known >> Feb 7 21:05:03 mt40 vdr: [4320] ERROR: ./locale: Datei oder Verzeichnis >> nicht gefunden >> Feb 7 21:05:03 mt40 vdr: [4320] no locale for language code 'deu,ger' >> Feb 7 21:05:03 mt40 vdr: [4320] no locale for language code 'slv,slo' >> Feb 7 21:05:03 mt40 vdr: [4320] no locale for language code 'ita' >> Feb 7 21:05:05 mt40 vdr: [4320] no DVB device found >> >> I wonder whether I can check something more to get your driver back to work >> > > Can you please load the mantis module with the verbose=5 module > parameter and try again ? At least it will show what's failing. > > Regards, > Manu > > Yupp, here is /var/log/messages with the line "options mantis verbose=5" in /etc/modprobe.conf.local Feb 7 22:56:41 mt40 kernel: found a VP-2033 PCI DVB-C device on (02:01.0), Feb 7 22:56:41 mt40 kernel: vendor=1002 device=4371 Feb 7 22:56:41 mt40 kernel: Mantis 0000:02:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 Feb 7 22:56:41 mt40 kernel: Mantis Rev 1 [1822:0008], irq: 21, latency: 64 Feb 7 22:56:41 mt40 kernel: memory: 0x0, mmio: 0xffffc20000366000 Feb 7 22:56:41 mt40 kernel: mantis_stream_control (0): Set stream to HIF Feb 7 22:56:41 mt40 kernel: mantis_i2c_init (0): Initializing I2C .. Feb 7 22:56:41 mt40 kernel: mantis_i2c_init (0): Disabling I2C interrupt Feb 7 22:56:41 mt40 kernel: mantis_i2c_xfer (0): Messages:2 Feb 7 22:56:41 mt40 kernel: mantis_i2c_write: Address=[0x50] <W>[ 08 ] Feb 7 22:56:41 mt40 kernel: mantis_i2c_read: Address=[0x50] <R>[ 00 08 ca 19 e9 b6 ] Feb 7 22:56:41 mt40 kernel: MAC Address=[00:08:ca:19:e9:b6] Feb 7 22:56:41 mt40 kernel: mantis_dma_init (0): Mantis DMA init Feb 7 22:56:41 mt40 kernel: mantis_alloc_buffers (0): DMA=0x60df0000 cpu=0xffff880060df0000 size=65536 Feb 7 22:56:41 mt40 kernel: mantis_alloc_buffers (0): RISC=0x60dba000 cpu=0xffff880060dba000 size=1000 Feb 7 22:56:41 mt40 kernel: mantis_calc_lines (0): Mantis RISC block bytes=[4096], line bytes=[2048], line count=[32] Feb 7 22:56:41 mt40 kernel: mantis_dvb_init (0): dvb_register_adapter Feb 7 22:56:41 mt40 kernel: DVB: registering new adapter (Mantis DVB adapter) Feb 7 22:56:41 mt40 kernel: mantis_dvb_init (0): dvb_dmx_init Feb 7 22:56:41 mt40 kernel: mantis_dvb_init (0): dvb_dmxdev_init Feb 7 22:56:41 mt40 kernel: vp2033_frontend_init (0): Probing for CU1216 (DVB-C) Feb 7 22:56:41 mt40 kernel: mantis_i2c_xfer (0): Messages:2 Feb 7 22:56:41 mt40 kernel: Byte MODE: Feb 7 22:56:41 mt40 kernel: Byte <0> RXD=0xa1ff2280 [22] Feb 7 22:56:41 mt40 kernel: mantis_i2c_xfer (0): Messages:2 Feb 7 22:56:41 mt40 kernel: Byte MODE: Feb 7 22:56:41 mt40 kernel: mantis_i2c_xfer (0): I/O error, LINE:155 Feb 7 22:56:41 mt40 kernel: mantis_i2c_xfer (0): Messages:2 Feb 7 22:56:41 mt40 kernel: Byte MODE: Feb 7 22:56:41 mt40 kernel: Byte <0> RXD=0xa1ff2280 [22] Feb 7 22:56:41 mt40 kernel: mantis_i2c_xfer (0): Messages:1 Feb 7 22:56:41 mt40 kernel: mantis_i2c_write: Address=[0x0c] <W>[ 00 33 ] Feb 7 22:56:41 mt40 kernel: mantis_i2c_xfer (0): Messages:2 Feb 7 22:56:42 mt40 kernel: Byte MODE: Feb 7 22:56:42 mt40 kernel: mantis_i2c_xfer (0): I/O error, LINE:155 Feb 7 22:56:42 mt40 kernel: mantis_dvb_init (0): !!! NO Frontends found !!! Feb 7 22:56:42 mt40 kernel: mantis_pci_probe (0): ERROR: Mantis DVB initialization failed <-1> Feb 7 22:56:42 mt40 kernel: mantis_pci_probe (0): ERROR: Mantis DMA exit! <-1> Feb 7 22:56:42 mt40 kernel: mantis_dma_exit (0): DMA=0x60df0000 cpu=0xffff880060df0000 size=65536 Feb 7 22:56:42 mt40 kernel: mantis_dma_exit (0): RISC=0x60dba000 cpu=0xffff880060dba000 size=1000 Feb 7 22:56:42 mt40 kernel: mantis_pci_probe (0): ERROR: Mantis I2C exit! <-1> Feb 7 22:56:42 mt40 kernel: mantis_i2c_exit (0): Disabling I2C interrupt Feb 7 22:56:42 mt40 kernel: mantis_i2c_exit (0): Removing I2C adapter Feb 7 22:56:42 mt40 kernel: mantis_pci_probe (0): ERROR: Mantis PCI exit! <-1> Feb 7 22:56:42 mt40 kernel: mantis_pci_exit (0): mem: 0xffffc20000366000 Feb 7 22:56:42 mt40 kernel: vendor=1002 device=4371 Feb 7 22:56:42 mt40 kernel: Mantis 0000:02:01.0: PCI INT A disabled Feb 7 22:56:42 mt40 kernel: mantis_pci_probe (0): ERROR: Mantis free! <-1> Feb 7 22:56:42 mt40 kernel: Mantis: probe of 0000:02:01.0 failed with error -1 _______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media@xxxxxxxxxxxxxxx linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
