On Tue, Jan 27, 2009 at 11:13 PM, Manu Abraham <abraham.manu@xxxxxxxxx> wrote:
Alex Betis wrote:
> Manu,
> I've tried to increase those timers long ago when played around with my card
> (Twinhan 1041) and scan utility.
> I must say that I've concentrated mostly on DVB-S channels that wasn't
> always locking.
> I didn't notice much improvements. The thing that did help was increasing
> the resolution of scan zigzags.
With regards to the zig-zag, one bug is fixed in the v4l-dvb tree.
Most likely you haven't tried that change.
I use Igor's version, but he merges v4l changes quite often.
Can you point me to a patch or code that was changes? I want to make sure I have that fix.
Can you point me to a patch or code that was changes? I want to make sure I have that fix.
> I've sent a patch on that ML and people were happy with the results.
I did look at your patch, but that was completely against the tuning
algorithm.
Well, you know, it works :)
What is the algorithm? I didn't make major changes beside increasing the zigzag resolution for different scan stages and zigzag around the frequency that previous stage was able to detect instead of starting from the beginning. Sounds logical to me.
What is the algorithm? I didn't make major changes beside increasing the zigzag resolution for different scan stages and zigzag around the frequency that previous stage was able to detect instead of starting from the beginning. Sounds logical to me.
[..]
> I believe DVB-S2 lock suffer from the same problem, but in that case the
> zigzag is done in the chip and not in the driver.
Along with the patch i sent, does the attached patch help you in
anyway (This works out for DVB-S2 only)?
I didn't tried to watch any DVB-S2 channels yet, not sure I have any FTA with my current directions.
But I'll try that change later for scanning.
BTW, too bad the code has very few comments inside to understand all the numeric values used for calculations.
But I'll try that change later for scanning.
BTW, too bad the code has very few comments inside to understand all the numeric values used for calculations.
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@xxxxxxxxxxxxxxx
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________ linux-dvb users mailing list For V4L/DVB development, please use instead linux-media@xxxxxxxxxxxxxxx linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
