Re: current v4l-dvb - cannot access /dev/dvb/: No such file or directory

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 2009-01-09 at 15:40 +0300, Goga777 wrote:
> hI
> 
> With today v4l-dvb I couldn't run my hvr4000 card on 2.6.27 kernel 
> 
> dmesg | grep DVB
> [ 13.156637] cx88[0]: subsystem: 0070:6900, board: Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [card=68,autodetected], frontend(s): 2
> [ 14.345650] tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
> [ 14.645283] cx88[0]/2: subsystem: 0070:6900, board: Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [card=68]
> [ 14.645342] cx88[0]/2: cx2388x based DVB/ATSC card
> 
> 
> from dmesg 
> 
>   13.048809] FDC 0 is a post-1991 82077
> [   13.063263] input: PC Speaker as /class/input/input3
> [   13.232315] Linux video capture interface: v2.00
> [   13.273216] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> [   13.308529] gameport: NS558 PnP Gameport is pnp00:0c/gameport0, io 0x200, speed 890kHz
> [   13.425179] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
> [   13.426114] cx88[0]: subsystem: 0070:6900, board: Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [card=68,autodetected], frontend(s): 2
> [   13.426182] cx88[0]: TV tuner type 63, Radio tuner type -1
> [   13.437869] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
> [   13.511674] ivtv: Start initialization, version 1.4.0
> [   13.547135] cx88[0]: i2c init: enabling analog demod on HVR1300/3000/4000 tuner
> [   14.174719] cx2388x alsa driver version 0.0.6 loaded
> [   14.229866] tuner' 1-0043: chip found @ 0x86 (cx88[0])
> [   14.301182] tda9887 1-0043: creating new instance
> [   14.301234] tda9887 1-0043: tda988[5/6/7] found
> [   14.304474] tuner' 1-0061: chip found @ 0xc2 (cx88[0])
> [   14.305474] tuner' 1-0063: chip found @ 0xc6 (cx88[0])
> [   14.352647] tveeprom 1-0050: Hauppauge model 69559, rev B2A0, serial# 804345
> [   14.352700] tveeprom 1-0050: MAC address is 00-0D-FE-0C-45-F9
> [   14.352746] tveeprom 1-0050: tuner model is Philips FMD1216ME (idx 100, type 63)
> [   14.352800] tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
> [   14.352857] tveeprom 1-0050: audio processor is CX882 (idx 33)
> [   14.352903] tveeprom 1-0050: decoder processor is CX882 (idx 25)
> [   14.352948] tveeprom 1-0050: has radio
> [   14.352990] cx88[0]: hauppauge eeprom: model=69559
> [   14.393070] tuner-simple 1-0061: creating new instance
> [   14.393155] tuner-simple 1-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
> [   14.395754] input: cx88 IR (Hauppauge WinTV-HVR400 as /class/input/input4
> [   14.405094] cx88[0]/2: cx2388x 8802 Driver Manager
> [   14.405156] cx88-mpeg driver manager 0000:02:03.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20
> [   14.405213] cx88[0]/2: found at 0000:02:03.2, rev: 5, irq: 20, latency: 32, mmio: 0xde000000
> [   14.405476] cx8800 0000:02:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
> [   14.405537] cx88[0]/0: found at 0000:02:03.0, rev: 5, irq: 20, latency: 32, mmio: 0xdc000000
> [   14.506629] wm8775' 1-001b: chip found @ 0x36 (cx88[0])
> [   14.513475] cx88[0]/0: registered device video0 [v4l2]
> [   14.513575] cx88[0]/0: registered device vbi0
> [   14.513682] cx88[0]/0: registered device radio0
> [   14.524681] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> [   14.524778] Intel ICH 0000:00:1f.5: setting latency timer to 64
> [   14.525589] ivtv0: Initializing card 0
> [   14.525642] ivtv0: Autodetected GotView PCI DVD2 Deluxe card (cx23416 based)
> [   14.533014] input: ImPS/2 Generic Wheel Mouse as /class/input/input5
> [   14.544093] ivtv 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> [   14.544158] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
> [   14.555162] cx88/2: cx2388x dvb driver version 0.0.6 loaded
> [   14.555231] cx88/2: registering cx8802 driver, type: dvb access: shared
> [   14.555303] cx88[0]/2: subsystem: 0070:6900, board: Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [card=68]
> [   14.555374] cx88[0]/2: cx2388x based DVB/ATSC card
> [   14.555446] BUG: unable to handle kernel NULL pointer dereference at 00000000
> [   14.555560] IP: [<c02e6bff>] __mutex_lock_common+0x3c/0xe4
> [   14.555652] *pde = 00000000
> [   14.555735] Oops: 0002 [#1] SMP
> [   14.555851] Modules linked in: cx88_dvb(+) cx88_vp3054_i2c videobuf_dvb wm8775 dvb_core tuner_simple tuner_types snd_seq_dummy tda9887 snd_seq_oss(+) snd_intel8x0(+) tda8290 snd_seq_midi snd_seq_midi_event snd_ac97_codec cx88_alsa(+) snd_seq ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_rawmidi snd_timer tuner snd_seq_device psmouse snd serio_raw ivtv(+) cx8800 cx8802 cx88xx soundcore cx2341x ir_common ns558 i2c_i801 v4l2_common videodev i2c_algo_bit gameport v4l1_compat snd_page_alloc tveeprom pcspkr floppy videobuf_dma_sg videobuf_core btcx_risc i2c_core parport_pc parport button intel_agp agpgart shpchp pci_hotplug rng_core iTCO_wdt sd_mod evdev usbhid hid ff_memless ext3 jbd mbcache ide_cd_mod cdrom ide_disk ata_piix libata dock 8139too usb_storage scsi_mod piix 8139cp mii ide_core uhci_hcd ehci_hcd usbcore thermal processor fan thermal_sys
> [   14.557013]
> [   14.557013] Pid: 2310, comm: modprobe Not tainted (2.6.27.1-custom-default1 #1)
> [   14.557013] EIP: 0060:[<c02e6bff>] EFLAGS: 00010246 CPU: 1
> [   14.557013] EIP is at __mutex_lock_common+0x3c/0xe4
> [   14.557013] EAX: de653e98 EBX: de739118 ECX: de739120 EDX: 00000000
> [   14.557013] ESI: dd4209e0 EDI: de73911c EBP: de653eb0 ESP: de653e88
> [   14.557013]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
> [   14.557013] Process modprobe (pid: 2310, ti=de652000 task=dd4209e0 task.ti=de652000)
> [   14.557013] Stack: 3535352e 5d343733 00000002 de739120 de739120 00000000 c044a6c0 de739110
> [   14.557013]        de739118 00000001 de653ebc c02e6d38 c02e6b88 de653ec4 c02e6b88 de653ed8
> [   14.557013]        e1ac7115 de6a9000 00000001 00000000 de653f0c e1aeca62 de739004 de739000
> [   14.557013] Call Trace:
> [   14.557013]  [<c02e6d38>] ? __mutex_lock_slowpath+0x17/0x1a
> [   14.557013]  [<c02e6b88>] ? mutex_lock+0x12/0x14
> [   14.557013]  [<c02e6b88>] ? mutex_lock+0x12/0x14
> [   14.557013]  [<e1ac7115>] ? videobuf_dvb_get_frontend+0x19/0x40 [videobuf_dvb]
> [   14.557013]  [<e1aeca62>] ? cx8802_dvb_probe+0xc9/0x1945 [cx88_dvb]
> [   14.557013]  [<e09ee41e>] ? cx8802_register_driver+0xbd/0x1ac [cx8802]
> [   14.557013]  [<e09ee467>] ? cx8802_register_driver+0x106/0x1ac [cx8802]
> [   14.557013]  [<e1aee37f>] ? dvb_init+0x22/0x27 [cx88_dvb]
> [   14.557013]  [<c0101132>] ? _stext+0x42/0x11a
> [   14.557013]  [<e1aee35d>] ? dvb_init+0x0/0x27 [cx88_dvb]
> [   14.557013]  [<c013d2ca>] ? __blocking_notifier_call_chain+0xe/0x51
> [   14.557013]  [<c014970b>] ? sys_init_module+0x8c/0x17d
> [   14.557013]  [<c0103b42>] ? syscall_call+0x7/0xb
> [   14.557013]  [<c013007b>] ? round_jiffies_relative+0x14/0x16
> [   14.557013]  =======================
> [   14.557013] Code: 78 04 89 f8 89 55 e0 64 8b 35 00 30 3f c0 e8 2e 0c 00 00 8d 43 08 89 45 e4 8b 53 0c 8d 45 e8 8b 4d e4 89 43 0c 89 4d e8 89 55 ec <89> 02 89 75 f0 83 c8 ff 87 03 48 74 55 8a 45 e0 8b 4d e0 83 e0
> [   14.557013] EIP: [<c02e6bff>] __mutex_lock_common+0x3c/0xe4 SS:ESP 0068:de653e88
> [   14.565211] ---[ end trace 94d8b014e067ac7b ]---

Odd.  It looks like a race where cx88-dvb.c:dvb_init() is being called
twice and running concurrently.  I'm not sure what to do about that.


But I think this Oops may be related to the dev->frontends.lock mutex
not being initialized.

cx8802_dvb_probe() calls videobuf_dvb_get_frontend() which needs to
obtain the core->dvbdev->frontends.lock (dvbdev points to dev).

I see the dev->frontends.lock only being initialized in
cx88-dvb.c:dvb_register(), which is called sometime in
cx8802_dvb_probe() after the videobuf_dvb_get_frontend() call that needs
to use the lock.  Oops.....



At a minimum something needs to be reordered in cx8802_dvb_probe() so
that frontend.lock init and frontend allocation happen before the if
block that does videobuf_queue_sg_init().

I'll look at this when I'm done my cx18 driver objectives for the
weekend.  It would really be better if someone with actual cx8802 DVB
hardware worked on it though...

Regards,
Andy




> [   14.639501] cx25840 2-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0)
> [   14.713180] tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #0)
> [   14.713430] tda9887 2-0043: creating new instance
> [   14.713495] tda9887 2-0043: tda988[5/6/7] found
> [   14.778413] All bytes are equal. It is not a TEA5767
> [   14.778557] tuner 2-0060: chip found @ 0xc0 (ivtv i2c driver #0)
> [   14.779143] tuner-simple 2-0060: creating new instance
> [   14.779186] tuner-simple 2-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
> [   14.781867] ivtv0: Registered device video1 for encoder MPG (4096 kB)
> [   14.781948] ivtv0: Registered device video33 for encoder YUV (2048 kB)
> [   14.782023] ivtv0: Registered device vbi1 for encoder VBI (1024 kB)
> [   14.782097] ivtv0: Registered device video25 for encoder PCM (320 kB)
> [   14.782174] ivtv0: Registered device radio1 for encoder radio
> [   14.782217] ivtv0: Initialized card: GotView PCI DVD2 Deluxe
> [   14.782347] cx88_audio 0000:02:03.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
> [   14.782460] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
> [   14.783176] ivtv: End initialization
> [   14.849033] intel8x0_measure_ac97_clock: measured 53593 usecs
> [   14.849085] intel8x0: clocking to 48000
> [   15.918647] Adding 626492k swap on /dev/hda6.  Priority:-1 extents:1 across:626492k
> [   15.928361] Adding 56156k swap on /dev/hdb5.  Priority:-2 extents:1 across:56156k
> [   16.082504] EXT3 FS on hda2, internal journal
> [   20.264662] device-mapper: uevent: version 1.0.3
> [   20.265339] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx
> [   56.024553] kjournald starting.  Commit interval 5 seconds
> [   56.024748] EXT3 FS on hda3, internal journal
> [   56.024825] EXT3-fs: mounted filesystem with ordered data mode.
> [   56.037399] kjournald starting.  Commit interval 5 seconds
> [   56.037627] EXT3 FS on hda5, internal journal
> [   56.037702] EXT3-fs: mounted filesystem with ordered data mode.
> [   58.129611] eth1: link up, 100Mbps, full-duplex, lpa 0x41E1
> [   63.336544] process `syslogd' is using obsolete setsockopt SO_BSDCOMPAT
> [   64.945747] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
> [   73.192024] firmware: requesting v4l-cx2341x-enc.fw
> [   73.288401] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
> [   73.489134] ivtv0: Encoder revision: 0x02060039
> [   73.506785] firmware: requesting v4l-cx25840.fw
> [   77.004190] cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
> [   80.030364] [drm] Initialized drm 1.1.0 20060810
> [   80.059688] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [   80.060282] [drm] Initialized radeon 1.29.0 20080528 on minor 0
> [   80.302075] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
> [   80.302099] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
> [   80.302140] pci 0000:01:00.0: putting AGP V3 device into 8x mode
> [   80.619333] [drm] Setting GART location based on new memory map
> [   80.619344] [drm] Loading R300 Microcode
> [   80.619377] [drm] Num pipes: 1
> [   80.619384] [drm] writeback test succeeded in 1 usecs
> [ 1552.680755] [drm] Num pipes: 1
> [ 1569.479839] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
> [ 1569.479867] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
> [ 1569.479908] pci 0000:01:00.0: putting AGP V3 device into 8x mode
> [ 1569.479954] [drm] Loading R300 Microcode
> [ 1569.479988] [drm] Num pipes: 1
> [ 1614.959936] [drm] Num pipes: 1
> [ 1619.666414] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
> [ 1619.666441] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
> [ 1619.666482] pci 0000:01:00.0: putting AGP V3 device into 8x mode
> [ 1619.666528] [drm] Loading R300 Microcode
> [ 1619.666562] [drm] Num pipes: 1
> 
> 
> 
> 
> _______________________________________________
> linux-dvb users mailing list
> For V4L/DVB development, please use instead linux-media@xxxxxxxxxxxxxxx
> linux-dvb@xxxxxxxxxxx
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
> 


_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@xxxxxxxxxxxxxxx
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux