Hi, i use the same Card WinTV-HD-DVB-S2. Without additional DVB cards. Kernel : Linux vdr 2.6.28 #1 SMP Fri Dec 26 13:58:23 CET 2008 x86_64 GNU/Linux 2 GB Ram Dvb Tree : s2-liplianin Firmware version 1.20.79.0. For me the card works as expected. No problems at all. cu Edgar (gimli) Hucek > > On 6 Jan 2009, at 19:09, Mauro Carvalho Chehab wrote: > >> >> Gregoire and others, >> I've just commit a patch that should fix this and another reported >> issue when selecting parts of cx88 code as module and other parts >> as monolithic. >> >> Could you please test if the patch also fixed the OOPS and doesn't >> generate any regression? >> > > I saw that Gregoire is still getting a kernel oops, I am also getting > an oops and wanted to provide the details in case it helps? > > Kernel is: Linux version 2.6.27.9-159.fc10.x86_64 > (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.3.2 20081105 > (Red Hat 4. > 3.2-7) (GCC) ) #1 SMP Tue Dec 16 14:47:52 EST 2008 > > I have a WinTV-HD-DVB-S2 (not the HVR-4000 board, the one the Kernel > identifies as 4000 lite, card type 69 to cx88). I may be of limited > help as this is a brand new card I am trying to get working for the > first time, can confirm firmware is in place as per wiki > instructions, but I thought additional information may help those > trying to resolve the issue. > > Only other card in the system is a Nova-T500 DVB-T using dib0700 so > unrelated. I read some of the discussion on race hazards but not the > case with just one card for this system as there is only one card > using this driver. > > It was my understanding that this DVB-S2 card has been working for > some time (hence my choice in purchase) so there has been a > regression somewhere in my view. > > Oops is below: > > cx2388x alsa driver version 0.0.6 loaded > ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 > cx88_audio 0000:01:06.1: PCI INT A -> Link[APC1] -> GSI 16 (level, > low) -> IRQ 16 > cx88[0]: subsystem: 0070:6906, board: Hauppauge WinTV-HVR4000(Lite) > DVB-S/S2 [card=69,autodetected], frontend(s): 1 > cx88[0]: TV tuner type -1, Radio tuner type -1 > cx88/0: cx2388x v4l2 driver version 0.0.6 loaded > cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded > tveeprom 5-0050: Hauppauge model 69100, rev B2C3, serial# 5329065 > tveeprom 5-0050: MAC address is 00-0D-FE-51-50-A9 > tveeprom 5-0050: tuner model is Conexant CX24118A (idx 123, type 4) > tveeprom 5-0050: TV standards ATSC/DVB Digital (eeprom 0x80) > tveeprom 5-0050: audio processor is None (idx 0) > tveeprom 5-0050: decoder processor is CX882 (idx 25) > tveeprom 5-0050: has no radio, has IR receiver, has no IR transmitter > cx88[0]: hauppauge eeprom: model=69100 > input: cx88 IR (Hauppauge WinTV-HVR400 as /devices/ > pci0000:00/0000:00:04.0/0000:01:06.1/input/input9 > cx88[0]/1: CX88x/0: ALSA support for cx2388x boards > cx8800 0000:01:06.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) - > > IRQ 16 > cx88[0]/0: found at 0000:01:06.0, rev: 5, irq: 16, latency: 32, mmio: > 0xf3000000 > cx88[0]/0: registered device video0 [v4l2] > cx88[0]/0: registered device vbi0 > cx88[0]/2: cx2388x 8802 Driver Manager > cx88-mpeg driver manager 0000:01:06.2: PCI INT A -> Link[APC1] -> GSI > 16 (level, low) -> IRQ 16 > cx88[0]/2: found at 0000:01:06.2, rev: 5, irq: 16, latency: 32, mmio: > 0xf5000000 > cx88/2: cx2388x dvb driver version 0.0.6 loaded > cx88/2: registering cx8802 driver, type: dvb access: shared > cx88[0]/2: subsystem: 0070:6906, board: Hauppauge WinTV-HVR4000(Lite) > DVB-S/S2 [card=69] > BUG: unable to handle kernel NULL pointer dereference at > 0000000000000000 > IP: [<ffffffffa09e3119>] vp3054_i2c_probe+0xe/0x115 [cx88_vp3054_i2c] > PGD 344b0067 PUD 35101067 PMD 0 > Oops: 0000 [1] SMP > CPU 1 > Modules linked in: cx88_dvb(+) cx88_vp3054_i2c videobuf_dvb tuner > cx8802 cx8800 cx88_alsa cx88xx ir_common mt2060 dvb_ > usb_dib0700(+) dib7000p i2c_algo_bit v4l2_common dib7000m tveeprom > nvidia(P) videodev v4l1_compat dvb_usb dvb_core v4l > 2_compat_ioctl32 dib3000mc videobuf_dma_sg videobuf_core forcedeth > i2c_nforce2 firewire_ohci btcx_risc dibx000_common > dib0070 i2c_core firewire_core k8temp hwmon snd_hda_intel > snd_seq_dummy pcspkr snd_seq_oss snd_seq_midi_event snd_seq > snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_timer > snd_page_alloc snd_hwdep snd soundcore serio_raw crc_itu_t > lirc_imon joydev lirc_dev floppy pata_amd ata_generic pata_acpi > sata_nv [last unloaded: scsi_wait_scan] > Pid: 1661, comm: modprobe Tainted: P > 2.6.27.9-159.fc10.x86_64 #1 > RIP: 0010:[<ffffffffa09e3119>] [<ffffffffa09e3119>] vp3054_i2c_probe > +0xe/0x115 [cx88_vp3054_i2c] > RSP: 0018:ffff8800345d1de8 EFLAGS: 00010202 > RAX: ffff88003549f000 RBX: 00000000ffffffed RCX: 0000000000000000 > RDX: ffff880001023f50 RSI: ffffffffa09ebeb0 RDI: 0000000000000000 > RBP: ffff8800345d1e08 R08: 0000000000000000 R09: 0000000000008a04 > R10: ffffffff817686c0 R11: 0000006000000000 R12: ffff88003549f000 > R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 > FS: 00007f29c0f846f0(0000) GS:ffff880037804880(0000) knlGS: > 0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b > CR2: 0000000000000000 CR3: 00000000345f0000 CR4: 00000000000006e0 > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > Process modprobe (pid: 1661, threadinfo ffff8800345d0000, task > ffff8800350b2e20) > Stack: 00000000ffffffed ffff88003549f000 ffff880033195800 > 0000000000000000 > ffff8800345d1e88 ffffffffa09e7ae2 0000000000000000 0000000000000018 > ffff8800345d1e88 ffffffff813307c4 0000000000000030 ffff8800345d1e98 > Call Trace: > [<ffffffffa09e7ae2>] cx8802_dvb_probe+0x8c/0x1b86 [cx88_dvb] > [<ffffffff813307c4>] ? printk+0x3c/0x40 > [<ffffffffa09cf09c>] cx8802_register_driver+0x125/0x1d6 [cx8802] > [<ffffffffa09e9672>] ? dvb_init+0x0/0x2a [cx88_dvb] > [<ffffffffa09e9699>] dvb_init+0x27/0x2a [cx88_dvb] > [<ffffffff8100a047>] do_one_initcall+0x47/0x12e > [<ffffffff81065c2d>] sys_init_module+0xa9/0x1b6 > [<ffffffff8101024a>] system_call_fastpath+0x16/0x1b > > > Code: 83 b8 70 06 00 00 2a 75 10 48 89 df e8 b1 93 78 ff 48 89 df e8 > a6 73 6d e0 58 5b c9 c3 55 48 89 e5 41 56 41 55 4 > 9 89 fd 41 54 53 <4c> 8b 37 31 db 41 83 be 70 06 00 00 2a 0f 85 e6 00 > 00 00 be d0 > RIP [<ffffffffa09e3119>] vp3054_i2c_probe+0xe/0x115 [cx88_vp3054_i2c] > RSP <ffff8800345d1de8> > CR2: 0000000000000000 > ---[ end trace 8b736803e6538324 ]--- > > I apologise if my error is not related, but to me it looks very > similar to the oops Gregoire is seeing and I am hoping it will help. > > Paul > > _______________________________________________ > linux-dvb mailing list > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > > > _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
