On Sat, 03 Jan 2009 19:58:45 +0100, Alex Betis <alex.betis@xxxxxxxxx> wrote: >> I use scan from dvb-apps, the command is >> "scan -o vdr /root/dvb/Astra-19.2E > /etc/vdr/channels.conf" >> where /root/dvb/Astra-19.2E is file with "S 11567500 V 22000000 5/6" > > I think that's the main issue. *BOUWSMA w*rote that its ok to rely on > astra's maintainers and connect to any transponder is enough to get a > list > of all others. I personaly don't trust those maintainers since I saw too > many errors in NIT messages that specify the transponder, so I specify > all > the frequencies I want to scan. I don't have a dish to 19.2, but there > were > many errors with 5 other satellites I have. > You can get a list of those frequencies here: > http://www.lyngsat.com/astra19.html Could you tell me how? I've tried with S 12188000 H 27500000 3/4 and it doesn't find anything. > > >> >> I use cx88-dvb driver but many modules are loaded with it see >> http://kedge.wz.cz/dvb/lsmod.txt > > I meant to ask what is the origin of the driver. I use Igor's driver > from: > http://mercurial.intuxication.org/hg/s2-liplianin/ I use driver from vanilla kernel 2.6.28 which have DVB api version 5.0. > If you have a S2API driver (or will use Igor's driver), you can use my > scan-s2 application with many changes in NIT parsing that might resolve > your > issue. > http://mercurial.intuxication.org/hg/scan-s2/ > See below. >> >> Scan console output is in file http://kedge.wz.cz/dvb/channels.conf >> and the result in http://kedge.wz.cz/dvb/channels.conf > > You've posted the same link for both outputs. Please post console output > when you run scan with "-v" parameter. Maybe even with "-vv". > The console output should be http://kedge.wz.cz/dvb/scanconsoleout.txt. I've tried to run scan and scan-s2 on "S 12188000 H 27500000 3/4" were the "RTL 2 Deutschland" channel should be and neither scan found anything. The console outputs are here: http://kedge.wz.cz/dvb/scan.txt http://kedge.wz.cz/dvb/scans2.txt If you want me to run the whole scan for "S 11567500 V 22000000 5/6" with -vv let me know and I'll do it. >> >> When console shows >> __tune_to_transponder:1508: ERROR: Setting frontend parameters failed: >> 22 >> Invalid argument >> >> the dmesg prints >> DVB: adapter 0 frontend 0 frequency 8175750 out of range >> (950000..2150000) > > It could be anything. Bad NIT message (most probably) or a memory > smashing > in scan application. > > >> >> >> Roman >> >> _______________________________________________ >> linux-dvb mailing list >> linux-dvb@xxxxxxxxxxx >> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb >> _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
