On Wed Dec 31 13:58 , "Devin Heitmueller"
On Tue, Dec 30, 2008 at 9:55 PM, sonofzev@xxxxxxxxxxxx
<sonofzev@xxxxxxxxxxxx> wrote:
> Upgrade to latest hg...
>
> Issue is still occurring.
>
> I also noticed some other messages in dmesg that I didn't see before that
> hopefully may help.
>
> cheers
> Allan
>
> Here is the output..
>
> xc2028 4-0061: -5 returned from send
> xc2028 4-0061: Error -22 while loading base firmware
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 4-0061: i2c output error: rc = -5 (should be 64)
> xc2028 4-0061: -5 returned from send
> xc2028 4-0061: Error -22 while loading base firmware
> zl10353: write to reg 5f failed (err = -5)!
> zl10353: write to reg 71 failed (err = -5)!
> xc2028 3-0061: Loading firmware for type=D2633 DTV7 (90), id
> 0000000000000000.
> xc2028 3-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456
> SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
> xc2028 3-0061: Incorrect readback of firmware version.
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 4-0061: i2c output error: rc = -5 (should be 4)
> xc2028 4-0061: -5 returned from send
> xc2028 4-0061: Error -22 while loading base firmware
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 4-0061: i2c output error: rc = -5 (should be 64)
> xc2028 4-0061: -5 returned from send
> xc2028 4-0061: Error -22 while loading base firmware
> zl10353: write to reg 5f failed (err = -5)!
> zl10353: write to reg 71 failed (err = -5)!
> xc2028 3-0061: Loading firmware for type=D2633 DTV7 (90), id
> 0000000000000000.
> xc2028 3-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456
> SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
> xc2028 3-0061: Incorrect readback of firmware version.
> zl10353_read_register: readreg error (reg=6, ret==-5)
> zl10353: write to reg 55 failed (err = -5)!
> zl10353: write to reg ea failed (err = -5)!
> zl10353: write to reg ea failed (err = -5)!
> zl10353: write to reg 56 failed (err = -5)!
> zl10353: write to reg 5e failed (err = -5)!
> zl10353: write to reg 5c failed (err = -5)!
> zl10353: write to reg 64 failed (err = -5)!
> zl10353: write to reg cc failed (err = -5)!
> zl10353: write to reg 65 failed (err = -5)!
> zl10353: write to reg 66 failed (err = -5)!
> zl10353: write to reg 6c failed (err = -5)!
> zl10353: write to reg 6d failed (err = -5)!
> zl10353: write to reg 6e failed (err = -5)!
> zl10353: write to reg 6f failed (err = -5)!
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 4-0061: i2c output error: rc = -5 (should be 64)
> xc2028 4-0061: -5 returned from send
> xc2028 4-0061: Error -22 while loading base firmware
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 4-0061: i2c output error: rc = -5 (should be 64)
> xc2028 4-0061: -5 returned from send
> xc2028 4-0061: Error -22 while loading base firmware
> zl10353: write to reg 5f failed (err = -5)!
> zl10353: write to reg 71 failed (err = -5)!
> zl10353_read_register: readreg error (reg=6, ret==-5)
> zl10353: write to reg 55 failed (err = -5)!
> zl10353: write to reg ea failed (err = -5)!
> zl10353: write to reg ea failed (err = -5)!
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 4-0061: Loading firmware for type=D2633 DTV7 (90), id
> 0000000000000000.
> xc2028 4-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456
> SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
> xc2028 4-0061: Incorrect readback of firmware version.
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 3-0061: Loading firmware for type=D2633 DTV7 (90), id
> 0000000000000000.
> xc2028 3-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456
> SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
> xc2028 3-0061: Incorrect readback of firmware version.
> xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 4-0061: i2c output error: rc = -5 (should be 4)
> xc2028 4-0061: -5 returned from send
> xc2028 4-0061: Error -22 while loading base firmware
> zl10353: write to reg 5f failed (err = -5)!
> zl10353: write to reg 71 failed (err = -5)!
> zl10353_read_register: readreg error (reg=6, ret==-5)
> zl10353: write to reg 55 failed (err = -5)!
> xc2028 3-0061: Loading firmware for type=D2633 DTV7 (90), id
> 0000000000000000.
> zl10353: write to reg ea failed (err = -5)!
> zl10353: write to reg ea failed (err = -5)!
> zl10353: write to reg 56 failed (err = -5)!
> zl10353: write to reg 5e failed (err = -5)!
> zl10353: write to reg 5c failed (err = -5)!
> zl10353: write to reg 64 failed (err = -5)!
> zl10353: write to reg cc failed (err = -5)!
> xc2028 3-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456
> SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
> zl10353: write to reg 65 failed (err = -5)!
> zl10353: write to reg 66 failed (err = -5)!
> zl10353: write to reg 6c failed (err = -5)!
> zl10353: write to reg 6d failed (err = -5)!
> zl10353: write to reg 6e failed (err = -5)!
> zl10353: write to reg 6f failed (err = -5)!
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 4-0061: i2c output error: rc = -5 (should be 64)
> xc2028 4-0061: -5 returned from send
> xc2028 4-0061: Error -22 while loading base firmware
> xc2028 3-0061: Incorrect readback of firmware version.
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 4-0061: i2c output error: rc = -5 (should be 64)
> xc2028 4-0061: -5 returned from send
> xc2028 4-0061: Error -22 while loading base firmware
> zl10353: write to reg 5f failed (err = -5)!
> zl10353: write to reg 71 failed (err = -5)!
> zl10353_read_register: readreg error (reg=6, ret==-5)
> zl10353: write to reg 55 failed (err = -5)!
> zl10353: write to reg ea failed (err = -5)!
> zl10353: write to reg ea failed (err = -5)!
> zl10353: write to reg 56 failed (err = -5)!
> zl10353: write to reg 5e failed (err = -5)!
> zl10353: write to reg 5c failed (err = -5)!
> zl10353: write to reg 64 failed (err = -5)!
> zl10353: write to reg cc failed (err = -5)!
> zl10353: write to reg 65 failed (err = -5)!
> zl10353: write to reg 66 failed (err = -5)!
> zl10353: write to reg 6c failed (err = -5)!
> zl10353: write to reg 6d failed (err = -5)!
> zl10353: write to reg 6e failed (err = -5)!
> zl10353: write to reg 6f failed (err = -5)!
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 4-0061: i2c output error: rc = -5 (should be 64)
> xc2028 4-0061: -5 returned from send
> xc2028 4-0061: Error -22 while loading base firmware
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 4-0061: i2c output error: rc = -5 (should be 64)
> xc2028 4-0061: -5 returned from send
> xc2028 4-0061: Error -22 while loading base firmware
> xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 3-0061: Loading firmware for type=D2633 DTV7 (90), id
> 0000000000000000.
> xc2028 3-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456
> SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
> xc2028 3-0061: Incorrect readback of firmware version.
> xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 4-0061: Loading firmware for type=D2633 DTV7 (90), id
> 0000000000000000.
> xc2028 4-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456
> SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
> xc2028 4-0061: Incorrect readback of firmware version.
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 3-0061: Loading firmware for type=D2633 DTV7 (90), id
> 0000000000000000.
> xc2028 3-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456
> SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
> xc2028 3-0061: Incorrect readback of firmware version.
> xc2028 4-0061: Loading firmware for type=D2633 DTV7 (90), id
> 0000000000000000.
> xc2028 4-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456
> SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
> xc2028 4-0061: Incorrect readback of firmware version.
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 4-0061: i2c output error: rc = -5 (should be 4)
> xc2028 4-0061: -5 returned from send
> xc2028 4-0061: Error -22 while loading base firmware
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 4-0061: i2c output error: rc = -5 (should be 64)
> xc2028 4-0061: -5 returned from send
> xc2028 4-0061: Error -22 while loading base firmware
> zl10353: write to reg 5f failed (err = -5)!
> zl10353: write to reg 71 failed (err = -5)!
> xc2028 3-0061: Loading firmware for type=D2633 DTV7 (90), id
> 0000000000000000.
> xc2028 3-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456
> SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
> xc2028 3-0061: Incorrect readback of firmware version.
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 4-0061: Loading firmware for type=D2633 DTV7 (90), id
> 0000000000000000.
> xc2028 4-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456
> SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
> xc2028 4-0061: Incorrect readback of firmware version.
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 3-0061: Loading firmware for type=D2633 DTV7 (90), id
> 0000000000000000.
> xc2028 3-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456
> SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
> xc2028 3-0061: Incorrect readback of firmware version.
> xc2028 4-0061: Loading firmware for type=D2633 DTV7 (90), id
> 0000000000000000.
> xc2028 4-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456
> SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
> xc2028 4-0061: Incorrect readback of firmware version.
> xc2028 3-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
> xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id
> 0000000000000000.
Do me a favor and please stop top posting. It's a violation of list policy.
Were those there before you upgraded to the latest hg?
I suspect that perhaps the components are powered down, which is why
the i2c calls are failing. Very strange.
--
Devin J. Heitmueller
http://www.devinheitmueller.com
AIM: devinheitmueller
)
------------------------------------------------------------------
Hi Devin
I did not see the messages before upgrading. However, I cannot confirm if they weren't there and I suspect they actually were. As the dmesg buffer is being constantly overwritten by these errors, and after more recent checks these more detailed messages aren't showing up any more. I believe I just missed them.
I will also enable the timing messages in my next kernel build but this probably won't be for a couple of days. If I get a chance before NYE celebrations tonight I will disable the option in MythTV that releases the adaptors when not in use. I don't really need this option as there are no other TV applications that will access these tuners. I will also check for any powersaving options both in the kernel and in the PCIe configuration of the mobo.
cheers
Allan
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
