Hi
I've fixed this. It was the v4l compatible option.. I was using the deprecated version. Basically as I had been using the hg version I hadn't taken notice of the options.
Sorry.. but hopefully this will help someone else.
cheers
Allan
On Tue Dec 30 12:57 , "sonofzev@xxxxxxxxxxxx"
HI All
I've just updated to 2.6.28 and have noticed something happening. Only one tuner appears to be registering. I have done this remotely so can't check the actual TV output, but noticed only 2 adaptors under /dev/dvb instead of 3 (I also have a Fusion Lite in the system)
I previously have been using the mercurial repository for the DVB drivers but this time, as I noticed my card (DViCO FusionHDTV DVB-T Dual Express) was supported, went for the in-kernel drivers..
I am wondering if I am doing something wrong with kernel config or if there is an issue with the in-kernel driver.. There have been no hardware changes.
Here is the output from "dmesg | grep cx23885"
media1 conf.d # dmesg | grep cx23885
cx23885 driver version 0.0.1 loaded
cx23885 0000:03:00.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
CORE cx23885[0]: subsystem: 18ac:db78, board: DViCO FusionHDTV DVB-T Dual Express [card=11,autodetected]
ir-kbd-i2c: i2c IR (FusionHDTV) detected at i2c-3/3-006b/ir0 [cx23885[0]]
cx23885_dvb_register() allocating 1 frontend(s)
cx23885[0]: cx23885 based dvb card
cx23885[0]: frontend initialization failed
cx23885_dvb_register() dvb_register failed err = -1
cx23885_dev_setup() Failed to register dvb adapters on VID_B
cx23885_dvb_register() allocating 1 frontend(s)
cx23885[0]: cx23885 based dvb card
DVB: registering new adapter (cx23885[0])
cx23885_dev_checkrevision() Hardware revision = 0xb0
cx23885[0]/0: found at 0000:03:00.0, rev: 2, irq: 16, latency: 0, mmio: 0xfd600000
cx23885 0000:03:00.0: setting latency timer to 64
Here is the output from "dmesg | grep xc2028" the only thing of note being only one tuner is registered
xc2028 4-0061: creating new instance
xc2028 4-0061: type set to XCeive xc2028/xc3028 tuner
xc2028 4-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
xc2028 4-0061: Loading firmware for type=D2633 DTV7 (90), id 0000000000000000.
xc2028 4-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000.
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
