Hi, Unfortunately, when I try tzap I get the following: # tzap -a1 -c .tzap/channels.conf "TF1" using '/dev/dvb/adapter1/frontend0' and '/dev/dvb/adapter1/demux0' ERROR: error while parsing guard_interval (syntax error) The channels.conf used has been generated by scandvb and is located at: http://e.grammatico.free.fr/linuxDVB/channels.conf Thanks and regards. Eric. 2008/12/20 Eric GRAMMATICO <e.grammatico@xxxxxxxxx>: > Thanks Hermann, > > That worked ! > > Cheers, > > Eric. > > 2008/12/20 hermann pitton <hermann-pitton@xxxxxxxx>: >> Hi, >> >> Am Samstag, den 20.12.2008, 12:30 +0100 schrieb Eric GRAMMATICO: >>> Hello All, >>> >>> I am trying desperately to lock signal on a FlyDVB-T. My system is >>> # uname -a >>> Linux mythtv 2.6.27.5-117.fc10.i686 #1 SMP Tue Nov 18 12:19:59 EST >>> 2008 i686 athlon i386 GNU/Linux >>> >>> It's like there is no data coming from... But my TV set is able to lock... >>> >>> I left all interesting information on >>> http://e.grammatico.free.fr/linuxDVB/ >>> >>> Any help is very welcome, >>> >> >> there is a slight chance that the transmitter uses a positive offset of >> about 167000Hz. It is quite common in France and the tda10046 can't find >> this on its own. >> >> Modify the initial scan file like this. >> >> #### Cannes - Vallauris #### >> #R1 >> T 490167000 8MHz AUTO NONE QAM64 8k AUTO NONE >> #R2 >> T 514167000 8MHz AUTO NONE QAM64 8k AUTO NONE >> #R3 >> T 578167000 8MHz AUTO NONE QAM64 8k AUTO NONE >> #R4 >> T 730167000 8MHz AUTO NONE QAM64 8k AUTO NONE >> #R5 >> T 690167000 8MHz AUTO NONE QAM64 8k AUTO NONE >> #R6 >> T 642167000 8MHz AUTO NONE QAM64 8k AUTO NONE >> >> Copy and paste and try with "scan" again. >> >> Cheers, >> Hermann >> >> >> >> >> >> >> > > > > -- > Tico. > -- Tico. _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
