I have a dual USB tuner from Aldi, which they call a Fission dual high definition DVB-T receiver. There's almost no identification on it, but I've put some photos at http://www.lemis.com/grog/photos/Photos.php?size=tiny&dirdate=20081217 in case somebody recognizes the form. The lsusb output identifies it as an Afa Technologies Inc. AF9035A USB Device, but the supplied (Microsoft-only) software often refers to it as a 9015. I'm attaching lsusb output. My first questions: is anybody working on this or a similar device? Can I help? Is there any hope of getting it to work with a reasonable amount of effort? More details: I'm using Ubuntu 8.10 on i386 with the latest v4l Hg sources, and I can't get it recognized. dmesg output (complete version is attached) says: [ 789.696018] usb 4-3: new high speed USB device using ehci_hcd and address 2 [ 789.846003] usb 4-3: configuration #1 chosen from 1 choice [ 790.052259] usbcore: registered new interface driver hiddev [ 790.056703] input: Afa Technologies Inc. AF9035A USB Device as /devices/pci0000:00/0000:00:10.3/usb4/4-3/4-3:1.1/input/input8 [ 790.057902] input,hidraw0: USB HID v1.01 Keyboard [Afa Technologies Inc. AF9035A USB Device] on usb-0000:00:10.3-3 [ 790.058287] usbcore: registered new interface driver usbhid [ 790.058511] usbhid: v2.6:USB HID core driver I've been following the instructions on the wiki, and I've got hold of the firmware files dvb-usb-af9015.fw and xc3028-v27.fw. The former doesn't get loaded; the latter gets loaded even if the stick isn't present: [ 15.559113] firmware: requesting xc3028-v27.fw [ 18.046874] xc2028 1-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [ 18.060053] xc2028 1-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. [ 26.604094] xc2028 1-0061: Loading firmware for type=(0), id 0000000100000007. [ 37.240018] xc2028 1-0061: Loading firmware for type=BASE FM (401), id 0000000000000000. [ 45.560019] xc2028 1-0061: Loading firmware for type=FM (400), id 0000000000000000. [ 45.928030] xc2028 1-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. [ 54.456030] xc2028 1-0061: Loading firmware for type=(0), id 0000000100000007. How does that happen? I've checked configuration files and things, but I can't see any mechanism for autoloading on boot. What makes it load automatically? Should I be using the same method to load the dvb-usb-af9015.fw firmware too? I've put it in /lib/firmware, but nothing exciting happens. Looking at v4l/af9015.c, it seems that I need to match the ID string to one of the entries in the af9015_properties structure. I did that (copying the details for another device), but it didn't make any difference: it's still just recognized as a HID device. Where do I go from here? If somebody's prepared to give me a bit of guidance, I'd like to get the thing working. Here in Australia they're very cheap ($79 for a dual tuner), and the results under Microsoft don't look bad. My main questions are: how do I go about the problem most effectively? Greg -- Finger grog@xxxxxxxxxxx for PGP public key. See complete headers for address and phone numbers.
Bus 001 Device 003: ID 15a4:1001
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x15a4
idProduct 0x1001
bcdDevice 2.00
iManufacturer 1 Afa Technologies Inc.
iProduct 2 AF9035A USB Device
iSerial 3 AF0103250800001
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 122
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 5
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 5
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x1400 3x 1024 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 1 Keyboard
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.01
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 65
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 10
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.27-9-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Nov 20 21:57:00 UTC 2008 (Ubuntu 2.6.27-9.19-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data) [ 0.000000] BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000 [ 0.000000] kernel direct mapping tables up to 38000000 @ 7000-c000 [ 0.000000] RAMDISK: 03936000 - 040fe3ff [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000FA940, 0014 (r0 AMI ) [ 0.000000] ACPI: RSDT 3FFF0000, 002C (r1 AMIINT VIA_K7 10 MSFT 97) [ 0.000000] ACPI: FACP 3FFF0030, 0081 (r1 AMIINT VIA_K7 11 MSFT 97) [ 0.000000] ACPI: DSDT 3FFF0120, 32BF (r1 VIA VIA_K7 1000 MSFT 100000D) [ 0.000000] ACPI: FACS 3FFF8000, 0040 [ 0.000000] ACPI: APIC 3FFF00C0, 0054 (r1 AMIINT VIA_K7 9 MSFT 97) [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 38000000 [ 0.000000] low ram: 00000000 - 38000000 [ 0.000000] bootmap 00008000 - 0000f000 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0038000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00005c0a20] TEXT DATA BSS ==> [0000100000 - 00005c0a20] [ 0.000000] #4 [0003936000 - 00040fe3ff] RAMDISK ==> [0003936000 - 00040fe3ff] [ 0.000000] #5 [00005c1000 - 00005c4000] INIT_PG_TABLE ==> [00005c1000 - 00005c4000] [ 0.000000] #6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00fb930] 000fb930 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00038000 [ 0.000000] HighMem 0x00038000 -> 0x0003fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003fff0 [ 0.000000] On node 0 totalpages: 262031 [ 0.000000] free_area_init_node: node 0, pgdat c048a580, node_mem_map c1000000 [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 223300 pages, LIFO batch:31 [ 0.000000] HighMem zone: 32464 pages, LIFO batch:7 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) [ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259727 [ 0.000000] Kernel command line: auto BOOT_IMAGE=Linux ro root=/dev/sda1 [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] TSC: PIT calibration confirmed by PMTIMER. [ 0.000000] TSC: using PMTIMER calibration value [ 0.000000] Detected 1837.495 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Memory: 1024740k/1048512k available (2572k kernel code, 22948k reserved, 1160k data, 424k init, 131008k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB) [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.004000] vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.004000] .init : 0xc04ab000 - 0xc0515000 ( 424 kB) [ 0.004000] .data : 0xc038335a - 0xc04a5680 (1160 kB) [ 0.004000] .text : 0xc0100000 - 0xc038335a (2572 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.004018] Calibrating delay loop (skipped), value calculated using timer frequency.. 3674.99 BogoMIPS (lpj=7349980) [ 0.004170] Security Framework initialized [ 0.004241] SELinux: Disabled at boot. [ 0.004339] AppArmor: AppArmor initialized [ 0.004410] Mount-cache hash table entries: 512 [ 0.004715] Initializing cgroup subsys ns [ 0.004780] Initializing cgroup subsys cpuacct [ 0.004842] Initializing cgroup subsys memory [ 0.004922] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004988] CPU: L2 Cache: 512K (64 bytes/line) [ 0.005069] Checking 'hlt' instruction... OK. [ 0.020455] SMP alternatives: switching to UP code [ 0.026611] Freeing SMP alternatives: 11k freed [ 0.026676] ACPI: Core revision 20080609 [ 0.028536] ACPI: Checking initramfs for custom DSDT [ 0.390184] ENABLING IO-APIC IRQs [ 0.390558] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.430315] CPU0: AMD Athlon(tm) XP 2500+ stepping 00 [ 0.432027] Brought up 1 CPUs [ 0.432027] Total of 1 processors activated (3674.99 BogoMIPS). [ 0.432027] CPU0 attaching sched-domain: [ 0.432027] domain 0: span 0 level CPU [ 0.432027] groups: 0 [ 0.432027] net_namespace: 840 bytes [ 0.432027] Booting paravirtualized kernel on bare hardware [ 0.432027] Time: 23:50:24 Date: 12/16/08 [ 0.432027] NET: Registered protocol family 16 [ 0.432027] EISA bus registered [ 0.432027] ACPI: bus type pci registered [ 0.433930] PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1 [ 0.433996] PCI: Using configuration type 1 for base access [ 0.435956] ACPI: EC: Look up EC in DSDT [ 0.443284] ACPI: Interpreter enabled [ 0.443348] ACPI: (supports S0 S1 S4 S5) [ 0.443586] ACPI: Using IOAPIC for interrupt routing [ 0.450191] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.450355] PCI: 0000:00:00.0 reg 10 32bit mmio: [e0000000, e7ffffff] [ 0.450421] pci 0000:00:01.0: supports D1 [ 0.450453] PCI: 0000:00:06.0 reg 10 32bit mmio: [dffff800, dfffffff] [ 0.450488] pci 0000:00:06.0: supports D1 [ 0.450490] pci 0000:00:06.0: supports D2 [ 0.450519] PCI: 0000:00:07.0 reg 10 32bit mmio: [dd000000, ddffffff] [ 0.450576] PCI: 0000:00:07.2 reg 10 32bit mmio: [de000000, deffffff] [ 0.450659] PCI: 0000:00:10.0 reg 20 io port: [e400, e41f] [ 0.450678] pci 0000:00:10.0: supports D1 [ 0.450680] pci 0000:00:10.0: supports D2 [ 0.450683] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.450751] pci 0000:00:10.0: PME# disabled [ 0.450848] PCI: 0000:00:10.1 reg 20 io port: [e800, e81f] [ 0.450868] pci 0000:00:10.1: supports D1 [ 0.450870] pci 0000:00:10.1: supports D2 [ 0.450873] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.450939] pci 0000:00:10.1: PME# disabled [ 0.451036] PCI: 0000:00:10.2 reg 20 io port: [ec00, ec1f] [ 0.451056] pci 0000:00:10.2: supports D1 [ 0.451058] pci 0000:00:10.2: supports D2 [ 0.451060] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.451127] pci 0000:00:10.2: PME# disabled [ 0.451209] PCI: 0000:00:10.3 reg 10 32bit mmio: [dffff700, dffff7ff] [ 0.451243] pci 0000:00:10.3: supports D1 [ 0.451246] pci 0000:00:10.3: supports D2 [ 0.451248] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.451315] pci 0000:00:10.3: PME# disabled [ 0.451431] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.451501] pci 0000:00:11.0: quirk: region 0800-087f claimed by vt8235 PM [ 0.451568] pci 0000:00:11.0: quirk: region 0400-040f claimed by vt8235 SMB [ 0.451677] PCI: 0000:00:11.1 reg 20 io port: [fc00, fc0f] [ 0.451725] PCI: 0000:00:11.5 reg 10 io port: [e000, e0ff] [ 0.451762] pci 0000:00:11.5: supports D1 [ 0.451764] pci 0000:00:11.5: supports D2 [ 0.451790] PCI: 0000:00:12.0 reg 10 io port: [dc00, dcff] [ 0.451797] PCI: 0000:00:12.0 reg 14 32bit mmio: [dffff600, dffff6ff] [ 0.451829] pci 0000:00:12.0: supports D1 [ 0.451831] pci 0000:00:12.0: supports D2 [ 0.451833] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.451900] pci 0000:00:12.0: PME# disabled [ 0.452001] PCI: 0000:01:00.0 reg 10 32bit mmio: [da000000, daffffff] [ 0.452007] PCI: 0000:01:00.0 reg 14 32bit mmio: [d0000000, d7ffffff] [ 0.452024] PCI: 0000:01:00.0 reg 30 32bit mmio: [dbee0000, dbefffff] [ 0.452069] PCI: bridge 0000:00:01.0 32bit mmio: [d9e00000, dbefffff] [ 0.452075] PCI: bridge 0000:00:01.0 32bit mmio pref: [c9d00000, d9cfffff] [ 0.452082] bus 00 -> node 0 [ 0.452091] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.455188] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.455897] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.456609] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.457314] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 10 11 12 14 15) [ 0.458020] ACPI: Power Resource [URP1] (off) [ 0.458129] ACPI: Power Resource [URP2] (off) [ 0.458236] ACPI: Power Resource [FDDP] (off) [ 0.458342] ACPI: Power Resource [LPTP] (off) [ 0.458511] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.458626] pnp: PnP ACPI init [ 0.458694] ACPI: bus type pnp registered [ 0.463394] pnp: PnP ACPI: found 12 devices [ 0.463456] ACPI: ACPI bus type pnp unregistered [ 0.463520] PnPBIOS: Disabled by ACPI PNP [ 0.464239] PCI: Using ACPI for IRQ routing [ 0.464438] NET: Registered protocol family 8 [ 0.464438] NET: Registered protocol family 20 [ 0.464438] NetLabel: Initializing [ 0.464438] NetLabel: domain hash size = 128 [ 0.464438] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.464438] NetLabel: unlabeled traffic allowed by default [ 0.464818] tracer: 772 pages allocated for 65536 entries of 48 bytes [ 0.464883] actual entries 65620 [ 0.465212] AppArmor: AppArmor Filesystem Enabled [ 0.465290] ACPI: RTC can wake from S4 [ 0.465359] system 00:01: ioport range 0x290-0x297 has been reserved [ 0.465359] system 00:01: ioport range 0x3f0-0x3f1 has been reserved [ 0.465359] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.465359] system 00:01: ioport range 0x400-0x40f has been reserved [ 0.465359] system 00:01: ioport range 0x800-0x87f has been reserved [ 0.465359] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved [ 0.501503] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.501567] pci 0000:00:01.0: IO window: disabled [ 0.501633] pci 0000:00:01.0: MEM window: 0xd9e00000-0xdbefffff [ 0.501699] pci 0000:00:01.0: PREFETCH window: 0x000000c9d00000-0x000000d9cfffff [ 0.501792] pci 0000:00:01.0: setting latency timer to 64 [ 0.501797] bus: 00 index 0 io port: [0, ffff] [ 0.501858] bus: 00 index 1 mmio: [0, ffffffff] [ 0.501920] bus: 01 index 0 mmio: [0, 0] [ 0.501980] bus: 01 index 1 mmio: [d9e00000, dbefffff] [ 0.502042] bus: 01 index 2 mmio: [c9d00000, d9cfffff] [ 0.502105] bus: 01 index 3 mmio: [0, 0] [ 0.502176] NET: Registered protocol family 2 [ 0.502396] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.502944] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.504958] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.506022] TCP: Hash tables configured (established 131072 bind 65536) [ 0.506968] TCP reno registered [ 0.507205] NET: Registered protocol family 1 [ 0.507435] checking if image is initramfs... it is [ 1.004080] Switched to high resolution mode on CPU 0 [ 1.299823] Freeing initrd memory: 7968k freed [ 1.301095] audit: initializing netlink socket (disabled) [ 1.301182] type=2000 audit(1229471424.300:1): initialized [ 1.307662] highmem bounce pool size: 64 pages [ 1.307732] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.311114] VFS: Disk quotas dquot_6.5.1 [ 1.311304] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.311519] msgmni has been set to 1762 [ 1.311750] io scheduler noop registered [ 1.311812] io scheduler anticipatory registered [ 1.311873] io scheduler deadline registered [ 1.311946] io scheduler cfq registered (default) [ 1.312069] PCI: VIA PCI bridge detected.Disabling DAC. [ 1.312215] pci 0000:01:00.0: Boot video device [ 1.313049] isapnp: Scanning for PnP cards... [ 1.666710] isapnp: No Plug & Play device found [ 1.723868] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 1.724123] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.724371] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.725314] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.725779] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.728497] brd: module loaded [ 1.728663] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 1.728918] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.729427] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.729495] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.730322] mice: PS/2 mouse device common for all mice [ 1.730596] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.730692] rtc0: alarms up to one year, y3k [ 1.730928] EISA: Probing bus 0 at eisa.0 [ 1.731028] EISA: Detected 0 cards. [ 1.731091] cpuidle: using governor ladder [ 1.731152] cpuidle: using governor menu [ 1.731876] TCP cubic registered [ 1.731972] Using IPI No-Shortcut mode [ 1.732333] registered taskstats version 1 [ 1.732517] Magic number: 4:468:858 [ 1.732743] tty ptysd: hash matches [ 1.732910] rtc_cmos 00:03: setting system clock to 2008-12-16 23:50:25 UTC (1229471425) [ 1.732991] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.733054] EDD information not available. [ 1.733742] Freeing unused kernel memory: 424k freed [ 1.733869] Write protecting the kernel text: 2576k [ 1.733970] Write protecting the kernel read-only data: 936k [ 1.762048] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 1.870174] fuse init (API version 7.9) [ 1.903838] processor ACPI0007:00: registered as cooling_device0 [ 2.552590] usbcore: registered new interface driver usbfs [ 2.552695] usbcore: registered new interface driver hub [ 2.552834] usbcore: registered new device driver usb [ 2.555582] USB Universal Host Controller Interface driver v3.0 [ 2.559267] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 2.559351] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 2.559485] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [ 2.559603] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e400 [ 2.559924] usb usb1: configuration #1 chosen from 1 choice [ 2.560038] hub 1-0:1.0: USB hub found [ 2.560111] hub 1-0:1.0: 2 ports detected [ 2.605646] No dock devices found. [ 2.679261] SCSI subsystem initialized [ 2.682633] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 2.732654] libata version 3.00 loaded. [ 2.768456] uhci_hcd 0000:00:10.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 2.768541] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 2.768634] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [ 2.768740] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e800 [ 2.768938] usb usb2: configuration #1 chosen from 1 choice [ 2.769034] hub 2-0:1.0: USB hub found [ 2.769105] hub 2-0:1.0: 2 ports detected [ 2.976420] uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21 [ 2.976504] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 2.976605] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 [ 2.976709] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000ec00 [ 2.976910] usb usb3: configuration #1 chosen from 1 choice [ 2.977014] hub 3-0:1.0: USB hub found [ 2.977086] hub 3-0:1.0: 2 ports detected [ 3.184499] ehci_hcd 0000:00:10.3: PCI INT D -> GSI 21 (level, low) -> IRQ 21 [ 3.184592] ehci_hcd 0000:00:10.3: EHCI Host Controller [ 3.184687] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 [ 3.184819] ehci_hcd 0000:00:10.3: irq 21, io mem 0xdffff700 [ 3.196044] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 3.196399] usb usb4: configuration #1 chosen from 1 choice [ 3.196501] hub 4-0:1.0: USB hub found [ 3.196574] hub 4-0:1.0: 6 ports detected [ 3.300493] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 3.304853] eth0: VIA Rhine II at 0xdffff600, 00:0c:76:96:49:98, IRQ 23. [ 3.305625] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1. [ 3.310020] pata_acpi 0000:00:11.1: can't derive routing for PCI INT A [ 3.310169] pata_acpi 0000:00:11.1: can't derive routing for PCI INT A [ 3.314661] pata_via 0000:00:11.1: version 0.3.3 [ 3.314676] pata_via 0000:00:11.1: can't derive routing for PCI INT A [ 3.315310] scsi0 : pata_via [ 3.315551] scsi1 : pata_via [ 3.318042] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 [ 3.318109] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 [ 3.481622] ata1.00: ATA-6: WDC WD2000JB-00GVC0, 08.02D08, max UDMA/100 [ 3.481696] ata1.00: 390721968 sectors, multi 16: LBA48 [ 3.497495] ata1.00: configured for UDMA/100 [ 3.660424] ata2.00: ATAPI: PIONEER DVD-RW DVR-109, 1.09, max UDMA/66 [ 3.676378] ata2.00: configured for UDMA/66 [ 3.676594] scsi 0:0:0:0: Direct-Access ATA WDC WD2000JB-00G 08.0 PQ: 0 ANSI: 5 [ 3.682939] scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-109 1.09 PQ: 0 ANSI: 5 [ 3.692624] scsi 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.692755] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.717800] Driver 'sd' needs updating - please use bus_type methods [ 3.718051] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB) [ 3.718145] sd 0:0:0:0: [sda] Write Protect is off [ 3.718208] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.718256] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.718440] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB) [ 3.718529] sd 0:0:0:0: [sda] Write Protect is off [ 3.718592] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.718635] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.718719] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 3.739609] sda1 sda2 [ 3.760047] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.767031] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 3.767109] Uniform CD-ROM driver Revision: 3.20 [ 3.767322] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.980563] PM: Starting manual resume from disk [ 3.980629] PM: Resume from partition 8:2 [ 3.980632] PM: Checking hibernation image. [ 3.980804] PM: Resume from disk failed. [ 3.997522] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled [ 3.999733] SGI XFS Quota Management subsystem [ 4.043310] XFS mounting filesystem sda1 [ 4.257714] Ending clean XFS mount for filesystem: sda1 [ 12.084581] udevd version 124 started [ 12.891280] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 12.943000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 13.103021] Linux agpgart interface v0.103 [ 13.444388] agpgart: Detected VIA KT400/KT400A/KT600 chipset [ 13.452805] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xe0000000 [ 13.598812] Linux video capture interface: v2.00 [ 13.924853] irda_init() [ 13.924877] NET: Registered protocol family 23 [ 14.234541] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 14.250357] ACPI: Power Button (FF) [PWRF] [ 14.250616] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 [ 14.260907] ACPI: Power Button (CM) [PWRB] [ 14.262107] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4 [ 14.276046] ACPI: Sleep Button (CM) [SLPB] [ 14.467600] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded [ 14.468379] cx88[0]: subsystem: 18ac:db10, board: DViCO FusionHDTV DVB-T Plus [card=21,autodetected], frontend(s): 1 [ 14.468464] cx88[0]: TV tuner type 4, Radio tuner type -1 [ 14.534670] saa7130/34: v4l2 driver version 0.2.14 loaded [ 14.697654] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded [ 14.714893] cx88[0]/2: cx2388x 8802 Driver Manager [ 14.714990] cx88-mpeg driver manager 0000:00:07.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 14.715077] cx88[0]/2: found at 0000:00:07.2, rev: 5, irq: 18, latency: 32, mmio: 0xde000000 [ 14.715188] cx8802_probe() allocating 1 frontend(s) [ 14.715336] saa7134 0000:00:06.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 14.715407] saa7133[0]: found at 0000:00:06.0, rev: 209, irq: 17, latency: 32, mmio: 0xdffff800 [ 14.715493] saa7133[0]: subsystem: 1461:f936, board: AVerMedia Hybrid TV/Radio (A16D) [card=137,autodetected] [ 14.715588] saa7133[0]: board init: gpio is 300000 [ 14.736644] input: saa7134 IR (AVerMedia Hybrid TV as /devices/pci0000:00/0000:00:06.0/input/input5 [ 14.801006] parport_pc 00:0b: reported by Plug and Play ACPI [ 14.801180] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 15.048290] saa7133[0]: i2c eeprom 00: 61 14 36 f9 00 00 00 00 00 00 00 00 00 00 00 00 [ 15.049073] saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff [ 15.049845] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 00 08 ff 00 0e ff ff ff ff [ 15.050616] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 15.051386] saa7133[0]: i2c eeprom 40: ff 65 00 ff c2 1e ff ff ff ff ff ff ff ff ff ff [ 15.052167] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 15.052937] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 15.053708] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 15.054478] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 15.055250] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 15.056026] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 15.056798] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 15.057568] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 15.058340] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 15.059111] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 15.059882] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 15.271133] tuner' 1-0061: chip found @ 0xc2 (saa7133[0]) [ 15.558957] xc2028 1-0061: creating new instance [ 15.559029] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner [ 15.559113] firmware: requesting xc3028-v27.fw [ 15.664807] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 16.037666] input: PS2++ Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input7 [ 18.046874] xc2028 1-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [ 18.060053] xc2028 1-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. [ 26.604024] (0), id 00000000000000ff: [ 26.604094] xc2028 1-0061: Loading firmware for type=(0), id 0000000100000007. [ 26.772010] xc2028 1-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007. [ 27.212905] saa7133[0]: registered device video0 [v4l2] [ 27.213190] saa7133[0]: registered device vbi0 [ 27.213461] saa7133[0]: registered device radio0 [ 27.213653] cx8800 0000:00:07.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 27.213728] cx88[0]/0: found at 0000:00:07.0, rev: 5, irq: 18, latency: 32, mmio: 0xdd000000 [ 27.214044] cx88[0]/0: registered device video1 [v4l2] [ 27.214322] cx88[0]/0: registered device vbi1 [ 27.215999] ACPI: I/O resource vt596_smbus [0x400-0x407] conflicts with ACPI region SMOV [0x400-0x406] [ 27.216114] ACPI: Device needs an ACPI driver [ 27.233343] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 27.233580] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 [ 27.259426] saa7134 ALSA driver for DMA sound loaded [ 27.260485] saa7133[0]/alsa: saa7133[0] at 0xdffff800 irq 17 registered as card -2 [ 27.332712] cx88/2: cx2388x dvb driver version 0.0.6 loaded [ 27.332786] cx88/2: registering cx8802 driver, type: dvb access: shared [ 27.332853] cx88[0]/2: subsystem: 18ac:db10, board: DViCO FusionHDTV DVB-T Plus [card=21] [ 27.332934] cx88[0]/2: cx2388x based DVB/ATSC card [ 27.479634] DVB: registering new adapter (cx88[0]) [ 27.479709] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)... [ 27.504389] dvb_init() allocating 1 frontend [ 27.512221] xc2028 1-0061: attaching existing instance [ 27.512295] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner [ 27.512362] DVB: registering new adapter (saa7133[0]) [ 27.512427] DVB: registering adapter 1 frontend 0 (Zarlink MT352 DVB-T)... [ 27.996419] loop: module loaded [ 28.045729] lp0: using parport0 (interrupt-driven). [ 28.229203] Adding 2000084k swap on /dev/sda2. Priority:-1 extents:1 across:2000084k [ 29.056191] type=1505 audit(1229471453.161:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=3769 [ 29.332239] type=1505 audit(1229471453.437:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=3774 [ 29.332660] type=1505 audit(1229471453.437:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=3774 [ 29.423877] type=1505 audit(1229471453.525:5): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=3778 [ 29.590474] ip_tables: (C) 2000-2006 Netfilter Core Team [ 29.652633] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 30.244775] NET: Registered protocol family 10 [ 30.245369] lo: Disabled Privacy Extensions [ 30.923089] RPC: Registered udp transport module. [ 30.923096] RPC: Registered tcp transport module. [ 32.199784] ACPI: WMI: Mapper loaded [ 33.200640] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 35.489859] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 35.489871] apm: overridden by ACPI. [ 35.915358] ppdev: user-space parallel port driver [ 36.329595] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). [ 36.419127] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 36.420530] NFSD: starting 90-second grace period [ 37.240018] xc2028 1-0061: Loading firmware for type=BASE FM (401), id 0000000000000000. [ 40.900008] eth0: no IPv6 routers present [ 45.560019] xc2028 1-0061: Loading firmware for type=FM (400), id 0000000000000000. [ 45.928030] xc2028 1-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000. [ 54.456018] (0), id 00000000000000ff: [ 54.456030] xc2028 1-0061: Loading firmware for type=(0), id 0000000100000007. [ 54.624009] xc2028 1-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007. [ 58.760993] Bluetooth: Core ver 2.13 [ 58.764301] NET: Registered protocol family 31 [ 58.764310] Bluetooth: HCI device and connection manager initialized [ 58.764317] Bluetooth: HCI socket layer initialized [ 58.812754] Bluetooth: L2CAP ver 2.11 [ 58.812764] Bluetooth: L2CAP socket layer initialized [ 58.857237] Bluetooth: SCO (Voice Link) ver 0.6 [ 58.857247] Bluetooth: SCO socket layer initialized [ 58.902772] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 58.902781] Bluetooth: BNEP filters: protocol multicast [ 58.943971] Bluetooth: RFCOMM socket layer initialized [ 58.944371] Bluetooth: RFCOMM TTY layer initialized [ 58.944379] Bluetooth: RFCOMM ver 1.10 [ 59.030483] Bridge firewalling registered [ 59.031686] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. [ 789.696018] usb 4-3: new high speed USB device using ehci_hcd and address 2 [ 789.846003] usb 4-3: configuration #1 chosen from 1 choice [ 790.052259] usbcore: registered new interface driver hiddev [ 790.056703] input: Afa Technologies Inc. AF9035A USB Device as /devices/pci0000:00/0000:00:10.3/usb4/4-3/4-3:1.1/input/input8 [ 790.057902] input,hidraw0: USB HID v1.01 Keyboard [Afa Technologies Inc. AF9035A USB Device] on usb-0000:00:10.3-3 [ 790.058287] usbcore: registered new interface driver usbhid [ 790.058511] usbhid: v2.6:USB HID core driver
Attachment:
pgpCexNTNujlL.pgp
Description: PGP signature
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
