im trying my friends usb tv card EMTEC S826 to run on my linux,
so far without succes :(
I can make further test with this device if somebody has idea what is wrong.
Will this device be supported in linux?
Which usb stick you advice to use with linux?
(is any hybrid analog/digital stick fully supported with linux?)
Regards,
LLG
my kernel: 2.6.27 SMP x86_64
v4l version:
v4l-dvb-7100e78482d7.tar.bz2 (md5sum 14cd47ad149ec1515ce20ff0b2f03354)
firmware:
dvb-usb-dib0700-1.20.fw (md5sum f42f86e2971fd994003186a055813237)
xc3028-v27.fw (md5sum 293dc5e915d9a0f74a368f8a2ce3cc10)
lsusb -vv:
Bus 001 Device 002: ID 1164:1f08 YUAN High-Tech Development Co., Ltd
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1164 YUAN High-Tech Development Co., Ltd
idProduct 0x1f08
bcdDevice 1.00
iManufacturer 1 YUANRD
iProduct 2 STK7700D
iSerial 3 0000000001
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 46
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
plug usb stick -> messages:
Dec 4 21:07:33 FuSioN usb 1-5: new high speed USB device using ehci_hcd and address 2
Dec 4 21:07:33 FuSioN usb 1-5: configuration #1 chosen from 1 choice
Dec 4 21:07:33 FuSioN usb 1-5: New USB device found, idVendor=1164, idProduct=1f08
Dec 4 21:07:33 FuSioN usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 4 21:07:33 FuSioN usb 1-5: Product: STK7700D
Dec 4 21:07:33 FuSioN usb 1-5: Manufacturer: YUANRD
Dec 4 21:07:33 FuSioN usb 1-5: SerialNumber: 0000000001
Dec 4 21:07:33 FuSioN dib0700: loaded with support for 8 different device-types
Dec 4 21:07:33 FuSioN dvb-usb: found a 'YUAN High-Tech STK7700PH' in cold state, will try to load a firmware
Dec 4 21:07:33 FuSioN firmware: requesting dvb-usb-dib0700-1.20.fw
Dec 4 21:07:33 FuSioN dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
Dec 4 21:07:34 FuSioN dib0700: firmware started successfully.
Dec 4 21:07:34 FuSioN dvb-usb: found a 'YUAN High-Tech STK7700PH' in warm state.
Dec 4 21:07:34 FuSioN dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
Dec 4 21:07:34 FuSioN DVB: registering new adapter (YUAN High-Tech STK7700PH)
Dec 4 21:07:34 FuSioN DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
Dec 4 21:07:34 FuSioN xc2028 4-0061: creating new instance
Dec 4 21:07:34 FuSioN xc2028 4-0061: type set to XCeive xc2028/xc3028 tuner
Dec 4 21:07:34 FuSioN input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/input/input7
Dec 4 21:07:34 FuSioN dvb-usb: schedule remote query interval to 150 msecs.
Dec 4 21:07:34 FuSioN dvb-usb: YUAN High-Tech STK7700PH successfully initialized and connected.
Dec 4 21:07:34 FuSioN usbcore: registered new interface driver dvb_usb_dib0700
(Red led on usb stick turns on)
ls /dev/dvb/adapter0/:
demux0 dvr0 frontend0 net0
dvbscan /usr/share/dvb/dvb-t/* -vv -> messages:
Dec 4 21:08:04 FuSioN firmware: requesting xc3028-v27.fw
Dec 4 21:08:04 FuSioN xc2028 4-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
Dec 4 21:08:04 FuSioN xc2028 4-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
Dec 4 21:08:11 FuSioN xc2028 4-0061: Loading firmware for type=D2620 DTV8 (208), id 0000000000000000.
Dec 4 21:08:11 FuSioN xc2028 4-0061: Loading SCODE for type=DTV7 DTV78 DTV8 DIBCOM52 CHINA SCODE HAS_IF_5400 (65000380), id 0000000000000000.
dvbscan /usr/share/dvb/dvb-t/* -vv:
scanning /usr/share/dvb/dvb-t/*
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 530000000 0 2 9 3 1 0 0
>>> tune to: 530000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:T
RANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x01
WARNING: >>> tuning failed!!!
>>> tune to: 530000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:T
RANSMISSION_MODE_8K:GUARD_INTERVAL_1_32:HIERARCHY_NONE (tuning failed)
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x01
>>> tuning status == 0x01
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
