Nobody? br wrote: > Hi, > I've got a Cinergy Hybrid XE DVB-T USB Stick, which has got a tm6010 > chip inside (I opened the case just to get sure). Quite fast I realized, > that there are no stable Linux drivers out there, so i tried the > unstable one. > > So I checked out the repo at http://linuxtv.org/hg/~mchehab/tm6010/ and > compiled (without DVB), installed, loaded the module and then inserted > the stick and well.. nothing happened, because the driver did not knew > about my device. To fix this, i added the line > { USB_DEVICE(0x0ccd, 0x0086), .driver_info = TM6010_BOARD_GENERIC }, > to file tm6000-cards.c (my lsusb output is 'Bus 008 Device 004: ID > 0ccd:0086 TerraTec Electronic GmbH'). I do not know, whether > TM6010_BOARD_GENERIC is the correct one, but for me it seemed to be the > best solution. > Afterward, the driver recognized my stick and began to work: > http://pastebin.com/f79722ed2 . In short: The firmware's missing. So I > extracted the firmware with help of a python script I found on the > internet and put it to the right place. Here's the (long) result: > http://pastebin.com/f6c853b43 > > I'm not surprised that my journey has failed, because I do not really > know what my added line does (good old try'n'error), so my question: > Where to go from here? > > Mark > > _______________________________________________ > linux-dvb mailing list > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
