Hi, this patch add support for define frontend (satellite or
terrestrial) in system with more than one cards.
example usage: saa7134-dvb use_frontend=0,1,0,1,1
Mirek Slugen
diff -Naur v4l-dvb-24bc99070e97.old/linux/drivers/media/video/saa7134/saa7134-dvb.c v4l-dvb-24bc99070e97/linux/drivers/media/video/saa7134/saa7134-dvb.c
--- v4l-dvb-24bc99070e97.old/linux/drivers/media/video/saa7134/saa7134-dvb.c 2008-09-29 07:25:40.000000000 +0200
+++ v4l-dvb-24bc99070e97/linux/drivers/media/video/saa7134/saa7134-dvb.c 2008-10-01 10:25:05.000000000 +0200
@@ -57,8 +57,8 @@
module_param(antenna_pwr, int, 0444);
MODULE_PARM_DESC(antenna_pwr,"enable antenna power (Pinnacle 300i)");
-static int use_frontend;
-module_param(use_frontend, int, 0644);
+static unsigned int use_frontend[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = 0 };
+module_param_array(use_frontend, int, NULL, 0644);
MODULE_PARM_DESC(use_frontend,"for cards with multiple frontends (0: terrestrial, 1: satellite)");
static int debug;
@@ -1061,7 +1061,7 @@
goto dettach_frontend;
break;
case SAA7134_BOARD_FLYDVB_TRIO:
- if (!use_frontend) { /* terrestrial */
+ if (!use_frontend[dev->nr]) { /* terrestrial */
if (configure_tda827x_fe(dev, &lifeview_trio_config,
&tda827x_cfg_0) < 0)
goto dettach_frontend;
@@ -1103,7 +1103,7 @@
goto dettach_frontend;
break;
case SAA7134_BOARD_MEDION_MD8800_QUADRO:
- if (!use_frontend) { /* terrestrial */
+ if (!use_frontend[dev->nr]) { /* terrestrial */
if (configure_tda827x_fe(dev, &md8800_dvbt_config,
&tda827x_cfg_0) < 0)
goto dettach_frontend;
@@ -1315,7 +1315,7 @@
attach_xc3028 = 1;
break;
case SAA7134_BOARD_ASUSTeK_TIGER_3IN1:
- if (!use_frontend) { /* terrestrial */
+ if (!use_frontend[dev->nr]) { /* terrestrial */
if (configure_tda827x_fe(dev, &asus_tiger_3in1_config,
&tda827x_cfg_2) < 0)
goto dettach_frontend;
@@ -1410,7 +1410,7 @@
/* otherwise we don't detect the tuner on next insmod */
saa7134_i2c_call_clients(dev, TUNER_SET_CONFIG, &tda9887_cfg);
} else if (dev->board == SAA7134_BOARD_MEDION_MD8800_QUADRO) {
- if ((dev->eedata[2] == 0x07) && use_frontend) {
+ if ((dev->eedata[2] == 0x07) && use_frontend[dev->nr]) {
/* turn off the 2nd lnb supply */
u8 data = 0x80;
struct i2c_msg msg = {.addr = 0x08, .buf = &data, .flags = 0, .len = 1};
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
