Re: hvr 1400

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Le samedi 22 novembre 2008 à 12:02 +0100, djamil a écrit :
Le vendredi 14 novembre 2008 à 07:47 +0100, djamil a écrit :
hello  again

gents, i wrote in 96 the first X11 application to drive a radio card in florida ...

so can anyone tell me about spying proramms under windows to reverse engeneer what wintv does ant the drivers

so i can get analog working in linux ?

best regards

_______________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb


hi

I adde this

        [CX23885_BOARD_HAUPPAUGE_HVR1400] = {
                .name           = "Hauppauge WinTV-HVR1400",
                .porta          = CX23885_ANALOG_VIDEO,
                .portb          = CX23885_MPEG_ENCODER,
                .portc          = CX23885_MPEG_DVB,
                .tuner_type     = TUNER_LG_PAL_NEW_TAPC,
                .input          = {{
                        .type   = CX23885_VMUX_TELEVISION,
                        .vmux   = 0,
                        .gpio0  = 0xff00,
                }, {
                        .type   = CX23885_VMUX_DEBUG,
                        .vmux   = 0,
                        .gpio0  = 0xff01,
                }, {
                        .type   = CX23885_VMUX_COMPOSITE1,
                        .vmux   = 1,
                        .gpio0  = 0xff02,
                }, {
                        .type   = CX23885_VMUX_SVIDEO,
                        .vmux   = 2,
                        .gpio0  = 0xff02,
                } },

        },

"cx23885-cards.c" 674 lignes --25%--                                               171,22-44     21%



and its still not working, can anyone help ? i does compile ....
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb


then i tryed this


[CX23885_BOARD_HAUPPAUGE_HVR1400] = {
                .name           = "Hauppauge WinTV-HVR1400",
                .porta          = CX23885_ANALOG_VIDEO,
                .portc          = CX23885_MPEG_DVB,
                .tuner_type     = TUNER_XC2028,
                .tuner_addr     = 0x61, /* 0xc2 >> 1 */
                .input          = {{
                        .type   = CX23885_VMUX_TELEVISION,
                        .vmux   =       CX25840_VIN7_CH3 |
                                        CX25840_VIN5_CH2 |
                                        CX25840_VIN2_CH1,
                        .gpio0  = 0,
                }, {
                        .type   = CX23885_VMUX_COMPOSITE1,
                        .vmux   =       CX25840_VIN7_CH3 |
                                        CX25840_VIN4_CH2 |
                                        CX25840_VIN6_CH1,
                        .gpio0  = 0,
                }, {
                        .type   = CX23885_VMUX_SVIDEO,
                        .vmux   =       CX25840_VIN7_CH3 |
                                        CX25840_VIN4_CH2 |
                                        CX25840_VIN8_CH1 |
                                        CX25840_SVIDEO_ON,
                        .gpio0  = 0,
                } },

        },

still no luck, firmware loading errors
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux