I use the TT 2300-C Premium card with a Conax CAM (rev 1.1) - 4.00e and this works fine with my cable provider. The CAM was ordered from www.dvb-shop.net along with the DVB-C card.
Apparently they only ship rev 1.2 ( (http://www.dvbshop.net/product_info.php/info/p20_Conax-CAM--Rev--1-2----4-00e.html) now which also supports the bitrates of HDTV, but I have not tested this CAM, although dvb-shop states that rev 1.2 is compatible as well.
My cable provider is not Technisat, but I guess that if Technisat encryption is based on Conax 4.00e then the CAM should be okay.
My configuration works in mythtv and (by recollection) mplayer and xine.
I get the same dmesg output as you for the tt-dvbpci card.
I also use a Terratec Cinergy-C Card using the mantis drivers but the CI interface of that card is not yet supported as well.
Rune
2008/11/2 Tomas Drajsajtl <linux-dvb@xxxxxxxxxxxx>
Hello,
I have bought and tested two DVB-C cards which are supported according to
http://www.linuxtv.org/wiki/index.php/DVB-C_PCI_Cards
Both are perfectly working with FTA but none with the CAM.
1. TechnoTrend Premium DVB-C 2300
DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-CA rev1.X)
adapter has MAC addr = ....
dvb-ttpci: gpioirq unknown type=0 len=0
dvb-ttpci: info @ card 3: firm f0240009, rtsl b0250018, vid 71010068, app
80002622
dvb-ttpci: firmware @ card 3 supports CI link layer interface
dvb-ttpci: DVB-C analog module @ card 3 detected, initializing MSP3415
dvb_ttpci: saa7113 not accessible.
saa7146_vv: saa7146 (0): registered device video2 [v4l2]
saa7146_vv: saa7146 (0): registered device vbi2 [v4l2]
DVB: registering frontend 3 (ST STV0297 DVB-C)...
Applications detect the inserted CAM even if the CAM is not inserted ;-) but
even when it is, no scrambled channel is decrypted.
2. Technisat CableStar HD2
found a VP-2040 PCI DVB-C device on (01:02.0),
Mantis Rev 1 [1ae4:0002], irq: 18, latency: 64
memory: 0xefeff000, mmio: 0xffffc20000aee000
MAC Address=[....]
mantis_alloc_buffers (0): DMA=0x7d820000 cpu=0xffff81007d820000 size=65536
mantis_alloc_buffers (0): RISC=0x7e50e000 cpu=0xffff81007e50e000 size=1000
DVB: registering new adapter (Mantis dvb adapter)
It says that an unsupported CAM is inserted. :-( Then I found in this
mailing list that the mantis CI-CAM support is not finalized yet. I
appreciate the work that Manu does with the mantis driver and I trust that
it will be supported in the comming months but I would expect that the Wiki
page mentioned above will have also the information about not yet supported
CI! :-(
So I have the CAM, two DVB-C cards but can't watch the channels I pay every
month... I spent many days with Google to find out a working solution with
these two or another card but unsuccessfully. Can somebody please advice me
a DVB-C card with CI which _is on market_ and does work with Technisat Conax
CAM?
Thanks in advance,
Tomas
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
