Hi, I'm a newbie in dvb waters, and all the googling doesn't help, so I turn to you. I've installed the device successfully, I gather: dvb-usb: found a 'Anysee DVB USB2.0' in warm state. i2c-adapter i2c-1: adapter [Anysee DVB USB2.0] registered dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (Anysee DVB USB2.0) anysee: firmware version:0.1.0 hardware id:10 i2c-adapter i2c-1: master_xfer[0] W, addr=0x1e, len=1 i2c-adapter i2c-1: master_xfer[1] R, addr=0x1e, len=1 i2c-adapter i2c-1: master_xfer[0] W, addr=0x1e, len=1 i2c-adapter i2c-1: master_xfer[1] R, addr=0x1e, len=1 i2c-adapter i2c-1: master_xfer[0] W, addr=0x1e, len=1 i2c-adapter i2c-1: master_xfer[1] R, addr=0x1e, len=1 i2c-adapter i2c-1: master_xfer[0] W, addr=0x1a, len=2 i2c-adapter i2c-1: master_xfer[0] W, addr=0x1a, len=1 i2c-adapter i2c-1: master_xfer[1] R, addr=0x1a, len=1 DVB: registering frontend 0 (Philips TDA10023 DVB-C)... i2c-adapter i2c-1: master_xfer[0] W, addr=0x1a, len=2 i2c-adapter i2c-1: master_xfer[0] R, addr=0xc0, len=1 i2c-adapter i2c-1: master_xfer[0] W, addr=0x1a, len=2 input: IR-receiver inside an USB DVB receiver as /class/input/input7 dvb-usb: schedule remote query interval to 200 msecs. dvb-usb: Anysee DVB USB2.0 successfully initialized and connected. usbcore: registered new interface driver dvb_usb_anysee Scanning the device produce a nice channels.conf file, which czap is happy to use: SVT HD(Com Hem):306000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:0:4356:1064 PPV Sport 1(Com Hem):306000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:4097:4353:1065 PPV Sport 2(Com Hem):306000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:4130:4386:1066 PPV Sport 3(Com Hem):306000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:4147:4403:1067 Extreme Sports Channel(Com Hem):314000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:4097:4353:1017 Channel One Russia(Com Hem):314000000:INVERSION_AUTO:6875000:FEC_NONE:QAM_64:4147:4403:1018 ... Is czap expected to return? Mine doesn't. I just get a long list of what seems to be SNR readings. Anyway, as far as I can tell, I should be all set for pointing mplayer at the dvr0 device: mplayer /dev/dvb/adapter0/dvr0 No output at all! Ctrl-C afer a minute says that it got killed in the demux module. I've looked all over the net and as far as I can tell, it should be as simple as czap to the right channel and then ask mplayer to use the dvr0 device. Am I doing something totally stupid here? Is the device broken? Any and all pointers highly appreciated, /Anders _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
