hello Thomas wrote: > Hi List, > > > since fedora use 2.6.27 kernels this > is all what happens when i plug in the stick: > > Nov 11 13:24:56 thomas-lt kernel: usb 2-6: new high speed USB device using ehci_hcd and address 3 > Nov 11 13:24:57 thomas-lt kernel: usb 2-6: configuration #1 chosen from 1 choice > Nov 11 13:24:57 thomas-lt kernel: Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 16 -> 8 > Nov 11 13:24:57 thomas-lt kernel: input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.1/input/input9 > Nov 11 13:24:57 thomas-lt kernel: input,hidraw0: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:1d.7-6 > Nov 11 13:24:57 thomas-lt kernel: usb 2-6: New USB device found, idVendor=15a4, idProduct=9016 > Nov 11 13:24:57 thomas-lt kernel: usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > Nov 11 13:24:57 thomas-lt kernel: usb 2-6: Product: DVB-T 2 > Nov 11 13:24:57 thomas-lt kernel: usb 2-6: Manufacturer: Afatech > Nov 11 13:24:57 thomas-lt kernel: usb 2-6: SerialNumber: 010101010600001 > Nov 11 13:24:57 thomas-lt kernel: dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in cold state, will try to load a firmware > Nov 11 13:24:57 thomas-lt kernel: firmware: requesting dvb-usb-af9015.fw > Nov 11 13:24:57 thomas-lt kernel: dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw' > Nov 11 13:24:57 thomas-lt kernel: usbcore: registered new interface driver dvb_usb_af9015 > > > if the stick is connected at boot time everything is working correctly. > > can someone please give me a hint where to look for the problem? > > version is af9015-e0e0e4ee5b33 you are not alone with this problem. It only happens 2.6.27 kernels. Looks like it does not reconnect device in the USB-bus as it should. I don't have access to 2.6.27 kernel yet, so I cannot examine it more. Hopefully there is someone who could fix that soon... I think good place to test fix is add some sleep (msleep(100)) before/after RECONNECT_USB -command around line 685 in af9015.c file. The other solution could be to remove whole RECONNECT_USB (after firmware download) and set no_reconnect -flag. > > > Best Regards > Thomas regards Antti -- http://palosaari.fi/ _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
