On Wed, Nov 5, 2008 at 6:58 AM, Paul Guzowski <guzowskip@xxxxxxxxxxxxx> wrote: > Greetings, > > Does anyone on this list have a sample channel.conf file for Brighthouse Networks cable or can anyone give enough information (frequencies, transponders, etc) so that I can try to build one? Thanks in advance. > > Paul in NW Florida Paul, You can use "scan" from dvb-apps, using the scan file, "us-Cable-Standard-center-frequencies-QAM256" ... If that doesn't work, you can try the other QAM256 cable scan files, located in the util/scan/atsc/ directory of dvb-apps. Alternatively, you can use the latest version of w_scan WITHOUT any scan file. This should produce the best results. The latest version of w_scan with atsc / qam scanning support can be downloaded from here: http://wirbel.htpc-forum.de/w_scan/w_scan-20080815.tar.bz2 You can scan cable using this command: w_scan -A2 -X > channels.conf Good luck. -Mike Krufky _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
