Hello to everyone, hoping that this is the right place to post. I have almost from 2 years a VP3020 CARD ( http://www.bttv-gallery.de/high/IMG_6748.JPG_vp3020_a.jpg), and seems to be supported as seen on BTTV Gallery This reports: [ chips: 25878-13 et al. tuner: TU1216/I H P 3112 297 13641D# pcb: VP3020 V1.0 Feb 9 20:36:42 localhost kernel: Feb 9 20:36:42 localhost kernel: DST type flags : 0x10 firmware version = 2 Feb 9 20:36:42 localhost kernel: DVB: registering frontend 0 (DST DVB-T)... ] Well, some time ago it worked nicely with a Gentoo system. Some time ago i upgraded to ubuntu 8.10 and now simply doesn't work, the interface dvb frontend does not come up Here is the log from dmesg: [ 3949.259468] bttv1: Bt878 (rev 17) at 0000:01:0a.0, irq: 18, latency: 32, mmio: 0xbfffd000 [ 3949.262776] bttv1: subsystem: ffff:0001 (UNKNOWN) [ 3949.262785] please mail id, board name and the correct card= insmod option to video4linux-list@xxxxxxxxxx [ 3949.262791] bttv1: using: *** UNKNOWN/GENERIC *** [card=0,autodetected] [ 3949.262846] bttv1: gpio: en=00000000, out=00000000 in=00f500ff [init] [ 3949.324149] bttv1: tuner type unset [ 3949.324164] bttv1: i2c: checking for MSP34xx @ 0x80... not found [ 3949.326059] bttv1: i2c: checking for TDA9875 @ 0xb0... <4>tuner' 2-0060: tuner type not set [ 3949.329104] not found [ 3949.329114] bttv1: i2c: checking for TDA7432 @ 0x8a... not found [ 3949.332159] bttv1: registered device video1 [ 3949.333385] bttv1: registered device vbi1 [ 3949.346064] bt878: AUDIO driver version 0.0.0 loaded I know that it worked under linux, maybe i am missing something? I spent a lot of time googling but i couldn't find anything interesting. Regards, Andrea _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb