> > Hello, > > I have bought and tested two DVB-C cards which are supported according to > > http://www.linuxtv.org/wiki/index.php/DVB-C_PCI_Cards > > Both are perfectly working with FTA but none with the CAM. > > > > 1. TechnoTrend Premium DVB-C 2300 > > > TT DVB-C 2300 works fine here with AlphaCrypt -Light. This card has > CI/CAM support for several years already. > And it has worked here for several years with CI/CAM. Interesting. I have Technisat Technicrypt CXV (Conax) inserted and none of the channels is decrypted. Tried czap, vlc, vdr. uname -a: Linux pvr 2.6.23.17-88.fc7 #1 SMP Thu May 15 00:02:29 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux lspci -nvv: 01:00.0 0480: 1131:7146 (rev 01) Subsystem: 13c2:000a Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (3750ns min, 9500ns max) Interrupt: pin A routed to IRQ 16 Region 0: Memory at eedff400 (32-bit, non-prefetchable) [size=512] czap - no errors reported but no useful data output vlc - reports detected CAM doesn't matter if it's really inserted or not: [00000338] dvb access debug: Opening device /dev/dvb/adapter0/ca0 [00000338] dvb access debug: CAMInit: CA interface with 2 slots [00000338] dvb access debug: CAMInit: CI link layer level interface type [00000338] dvb access debug: CAMInit: built-in descrambler detected [00000338] dvb access debug: CAMInit: 16 available descramblers (keys) [00000338] dvb access debug: CAMInit: ECD scrambling system supported vdr - says only Nov 3 07:42:33 pvr vdr: [16467] ERROR: no useful data seen within 10627076 byte of video stream I know that vdr should report something about detected CAM but nothing in it's log file... Tomas _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
