| I have a Geniatech x8000 thriller ATSC card. The only way Ubuntu will see it is with the ismod option in the etc/modprobe.d/option file. The ATSC part is not recognized. Plus there is no sound. Can you help. Larry -dmesg below 44.901324] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded [ 44.901560] cx88[0]: subsystem: 14f1:1419, board: Geniatech X8000-MT DVBT [card=63,insmod option], frontend(s): 1 [ 44.901565] cx88[0]: TV tuner type 71, Radio tuner type 0 [ 44.981249] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded [ 45.164340] tuner' 1-0061: chip found @ 0xc2 (cx88[0]) [ 45.681603] xc2028 1-0061: creating new instance [ 45.681609] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner [ 45.681618] cx88[0]: Asking xc2028/3028 to load firmware xc3028-v27.fw [ 45.681631] cx88[0]/2: cx2388x 8802 Driver Manager [ 45.681658] ACPI: PCI Interrupt 0000:00:0c.2[A] -> GSI 16 (level, low) -> IRQ 19 [ 45.681674] cx88[0]/2: found at 0000:00:0c.2, rev: 5, irq: 19, latency: 32, mmio: 0xf6000000 [ 45.681698] cx8802_probe() allocating 1 frontend(s) [ 45.681904] ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 19 [ 45.681916] cx88[0]/0: found at 0000:00:0c.0, rev: 5, irq: 19, latency: 32, mmio: 0xf4000000 [ 45.681985] cx88[0]/0: registered device video0 [v4l2] [ 45.682018] cx88[0]/0: registered device vbi0 [ 45.682051] cx88[0]/0: registered device radio0 [ 45.768992] cx88_dvb: Unknown parameter `card' [ 46.079711] NET: Registered protocol family 17 [ 47.330152] xc2028 1-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [ 47.330337] cx88[0]: Calling XC2028/3028 callback [ 47.530494] xc2028 1-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. [ 47.530502] cx88[0]: Calling XC2028/3028 callback [ 49.042136] xc2028 1-0061: Loading firmware for type=MTS (4), id 000000000000b700. [ 49.064305] xc2028 1-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700. [ 49.099919] xc2028 1-0061: Incorrect readback of firmware version. [ 49.158010] cx88[0]: Calling XC2028/3028 callback [ 49.361081] xc2028 1-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. [ 49.361089] cx88[0]: Calling XC2028/3028 callback [ 50.860783] xc2028 1-0061: Loading firmware for type=MTS (4), id 000000000000b700. [ 50.882947] xc2028 1-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700. [ 50.966673] cx88[0]: Calling XC2028/3028 callback [ 51.086790] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 20 [ 51.086954] PCI: Setting latency timer of device 0000:00:11.5 to 64 [ 52.489700] loop: module loaded [ 52.514208] lp0: using parport0 (interrupt-driven). [ 52.614795] Adding 6072528k swap on /dev/sdb5. Priority:-1 extents:1 across:6072528k [ 53.177612] EXT3 FS on sdb1, internal journal [ 53.741721] NET: Registered protocol family 10 [ 53.742225] lo: Disabled Privacy Extensions [ 54.549762] ip_tables: (C) 2000-2006 Netfilter Core Team [ 55.028420] No dock devices found. [ 56.643293] capifs: Rev 1.1.2.3 [ 58.230204] audit(1225633869.241:2): type=1503 operation="capable" name="sys_resource" pid=5164 profile="" namespace="default" [ 60.296371] apm: BIOS not found. [ 60.865343] ppdev: user-space parallel port driver [ 60.960941] audit(1225633871.973:3): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5421 profile="" namespace="default" [ 63.502560] cx88[0]: Calling XC2028/3028 callback [ 63.702671] xc2028 1-0061: Loading firmware for type=BASE FM (401), id 0000000000000000. [ 63.702681] cx88[0]: Calling XC2028/3028 callback [ 63.767201] eth0: no IPv6 routers present [ 65.190478] xc2028 1-0061: Loading firmware for type=FM (400), id 0000000000000000. |
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
