Do you have Igor's driver in ../s2/ directory?
RTFM?
Here's the part that I wrote in README:
The driver directory was symbolically linked to "s2" directory. If you have the driver in other directory,
you'll have to change the following line in Makefile to point to the right place:
INCLUDE=-I../s2/linux/include
RTFM?
Here's the part that I wrote in README:
The driver directory was symbolically linked to "s2" directory. If you have the driver in other directory,
you'll have to change the following line in Makefile to point to the right place:
INCLUDE=-I../s2/linux/include
On Thu, Oct 30, 2008 at 10:41 AM, <jean-paul@xxxxxxxxx> wrote:
compiled on opensuse 11.0 default.
gcc -I../s2/linux/include -c atsc_psip_section.c -o atsc_psip_section.o
gcc -I../s2/linux/include -c diseqc.c -o diseqc.o
gcc -I../s2/linux/include -c dump-vdr.c -o dump-vdr.o
gcc -I../s2/linux/include -c dump-zap.c -o dump-zap.o
gcc -I../s2/linux/include -c lnb.c -o lnb.o
gcc -I../s2/linux/include -c scan.c -o scan.o
scan.c: In function âtune_to_transponderâ:
scan.c:1669: error: âSYS_DSSâ undeclared (first use in this function)
scan.c:1669: error: (Each undeclared identifier is reported only once
scan.c:1669: error: for each function it appears in.)
scan.c: In function âscan_tpâ:
scan.c:2048: error: âSYS_DSSâ undeclared (first use in this function)
make: *** [scan.o] Error 1
Jean-Paul
Please specify what was the error in scan-s2 compilation and what changeset
you've used?
On Wed, Oct 29, 2008 at 5:47 PM, <jean-paul@xxxxxxxxx> wrote:
S2API (drivers) latest version compile without error, Compiling
scan-s2 give a error on DDS or something like that. Remove it from
scan.c and compile it again.
Scanning booth LNB?s (astra 1 & 3) and only normal S. Try al options
but no S2 channels. Compile VDR with S2API patch and streamdev
plugin. No problem so far. Copy the new channels.conf to the vdr
directory and start vdr. Tuning to FTA channels is no problem but
encrypt channels are not available. For so far as I can see the caids
are correct (verify with the caids of mij production system (also
2*tt 3200 incl cam/card and multiproto/vdr 1.7.0 and off Corse
streamdev.
No S2 channels, No encrypt channels.
Regards
Jean-Paul
_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
