Ok clone the repo and its compiling again. Thanx. Now I want to scan channels (scab-s2) on both lnb;s (astra 1 & 3). First transponder scans only 13 services and Diseqc doesn?t work with the second lnb. WARNING: >>> tuning failed!!! >>> tune to: 11856:vS1C56:S23.5E:27500: (tuning failed) DiSEqC: uncommitted switch pos 0 DiSEqC: switch pos 1, 13V, hiband (index 6) DVB-S IF freq is 1256000 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 >>> tuning status == 0x00 WARNING: >>> tuning failed!!! ERROR: initial tuning failed dumping lists (0 services) Done. Citeren Manu Abraham <abraham.manu@xxxxxxxxx>: > jean-paul@xxxxxxxxx wrote: >> Ok again. >> >> I using now vdr 1.7.0 and multiproto from manu to make my two tt >> 3200-ci working with streamdev. Vdr zapper en MPC. Its working fine >> except some judder but its more a vdr issue. >> >> For now I have a development system with an TT 3200 to and try to let >> vdr run with S2API drivers. After getting the drivers from >> http://mercurial.intuxication.org/hg/s2-liplianin/ the compile ends >> with a error: > > You can simply clone http://jusst.de/hg/v4l-dvb > or http://linuxtv.org/hg/v4l-dvb and check > > The former contains two more fixes, so better try to test with that. > > Regards, > Manu > _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
