Hi, this sounds like exactly my problem! I have a TwinHan / AzureWaveAD-CP400 CI DVB-Cwith a Conax CA module and I'm using the ComHem network also. Will tryout the patch soon! I don't know which tuner is in the CP400 but this is what it detects: [ 12.453080] Mantis Rev 1 [1822:0043], irq: 20, latency: 32[ 12.453082] memory: 0xfdbff000, mmio: 0xf88b2000[ 12.456000] MAC Address=[00:08:ca:1c:65:a0][ 12.456033] mantis_alloc_buffers (0): DMA=0x36280000 cpu=0xf6280000size=65536[ 12.456038] mantis_alloc_buffers (0): RISC=0x378ec000cpu=0xf78ec000 size=1000[ 12.456041] DVB: registering new adapter (Mantis dvb adapter)[ 12.473335] lirc_dev: lirc_register_plugin: sample_rate: 0[ 12.477293] lirc_mceusb2[2]: Philips eHome Infrared Transceiver on usb2:2[ 12.477344] usbcore: registered new interface driver lirc_mceusb2[ 12.972617] mantis_frontend_init (0): Probing for CU1216 (DVB-C)[ 12.974710] mantis_frontend_init (0): found Philips CU1216 DVB-Cfrontend (TDA10023) @ 0x0c[ 12.974713] mantis_frontend_init (0): Mantis DVB-C Philips CU1216frontend attach success[ 12.974718] DVB: registering frontend 0 (Philips TDA10023 DVB-C)...[ 12.974868] mantis_ca_init (0): Registering EN50221 device[ 12.974958] mantis_ca_init (0): Registered EN50221 device[ 12.974970] mantis_hif_init (0): Adapter(0) Initializing MantisHost Interface[ 14.106576] dvb_ca adapter 0: DVB CAM detected and initialised successfully regards/Ernst On Thu, Oct 23, 2008 at 15:13, Mårten Gustafsson <reklam@xxxxxxxxxxxxxx> wrote:>> Nikke>> I tried your patch, and it "improve" things a bit. Kaffeine is able to scan> a few channels now without any entries in /var/log/messages. w_scan finds a> few frequencies, but no services. Scan results are different between scans.> w_scan works "better" if timeout settings are increased.>> The channels found by Kaffeine are not viewable, there is something moving,> but I guess the driver is unable to descramble the signal.>> My system is an Ubuntu 8.10 amd64. The network is ComHem and the CI is from> Conax. I also have the AzureWave AD-CP300.>> Since this is an improvement I agree with you, Manu should apply the patch.>> Mårten>> -----Ursprungligt meddelande----->>> =================================================> On Wed, 15 Oct 2008, Hans Bergersen wrote:>> > Hi,> >>> > I have got a Twinhan vp-2033 based card. I run Ubuntu 8.04. I have> > downloaded the driver from http://jusst.de/hg/mantis and it compiled> > just fine. But when i try to tune a channel the tuning fails. It is> > a newer card with the tda10023 tuner but when the driver loads it> > uses the tda10021. What do I have to do to make it use the right> > tuner? Can i give some options when compiling or when loading the> > module?> <snip>> > Any ideas?>> Try the attached patch which fixes this for my Azurewave AD-CP300 (at> least last time I compiled it).>> I've sent it to Manu and he was going to apply it, but it hasn't shown> up on http://jusst.de/hg/mantis/ yet...>>> /Nikke> --> -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-> Niklas Edmundsson, Admin @ {acc,hpc2n}.umu.se | nikke@xxxxxxxxxx> ---------------------------------------------------------------------------> "I don't believe it. There are no respected plastic surgeons." - Logan> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=> -------------- next part -------------->> Fix tda10021 to not claim tda10023.>> Previously mantis_frontend_init() relied on the PCI ID alone, this> causes trouble when a card has a different chip depending on> the manufacturing date. This match makes it work with newer> Azurewave AD-CP300 cards while (hopefully) maintaining compatibility> with older cards.>>>> _______________________________________________> linux-dvb mailing list> linux-dvb@xxxxxxxxxxx> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb_______________________________________________linux-dvb mailing listlinux-dvb@xxxxxxxxxxxxxxx://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
