>>> What's special about the ARD transponder vs other transponders? >>> >>> >>> >> >> > No idea, with other cards its no problem, but this "beast" fails. > Under windows at the same cable its working fine. > > >>> If you can show a difference I can try to replicate it with a generator >>> and provide a patch. >>> >>> >> >> > Thats the correspondent channels.conf: > Das > Erste;ARD:11836:hC34:S19.2E:27500:101:102=deu,103=2ch;106=dd:104:0:28106:1:1101:0 > ZDF;ZDFvision:11953:hC34:S19.2E:27500:110:120=deu,121=2ch;125=dd:130:0:28006:1:1079:0 > RTL Television,RTL;RTL > World:12187:hC34:S19.2E:27500:163:104=deu;106=deu:105:0:12003:1:1089:0 > RTL2;RTL World:12187:hC34:S19.2E:27500:166:128=deu:68:0:12020:1:1089:0 > VOX;RTL World:12187:hC34:S19.2E:27500:167:136=deu:71:0:12060:1:1089:0 > SAT.1;ProSiebenSat.1:12544:hC56:S19.2E:22000:255:256=deu;259=deu:32:0:17500:1:1107:0 > ProSieben;ProSiebenSat.1:12544:hC56:S19.2E:22000:511:512=deu;515=deu:33:0:17501:1:1107:0 > kabel > eins;ProSiebenSat.1:12544:hC56:S19.2E:22000:767:768=deu:34:0:17502:1:1107:0 > > > ARD has the lowest frequency so maybe thats the problem ? > > BTW the values shown for signal strength and snr are not correct. On the working channel it shows: SGNL:0100 SNRA:FD28 on the failing channel SGNL:1600 SNRA:A237 BER and UNC is Zero or nearly zero in booth cases. -- Helmut Auer, helmut@xxxxxxxxxxxxx _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
