Andrej Podzimek kirjoitti:> Hello,> > I've been using this device under Linux since April with no problems at all. Now it stopped working „overnight“. Please help me find out whether this is my mistake, a hardware failure or a bug in the driver.> > Kernel: 2.6.27.1 (vanilla)> af9015: af9015-ccb3736e43ba (the current one)> > The dmesg output is interesting. This one is from yesterday when it worked:> > Oct 20 22:32:07 xandrej usb 4-2.4: new high speed USB device using ehci_hcd and address 12> Oct 20 22:32:07 xandrej usb 4-2.4: configuration #1 chosen from 1 choice> Oct 20 22:32:07 xandrej dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in cold state, will try to load a firmware> Oct 20 22:32:07 xandrej firmware: requesting dvb-usb-af9015.fw> Oct 20 22:32:07 xandrej dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'> Oct 20 22:32:07 xandrej usb 4-2.4: USB disconnect, address 12> Oct 20 22:32:07 xandrej dvb-usb: generic DVB-USB module successfully deinitialized and disconnected.> Oct 20 22:32:07 xandrej dvb-usb: generic DVB-USB module successfully deinitialized and disconnected.> Oct 20 22:32:07 xandrej usb 4-2.4: new high speed USB device using ehci_hcd and address 13> Oct 20 22:32:07 xandrej usb 4-2.4: configuration #1 chosen from 1 choice> Oct 20 22:32:07 xandrej dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in warm state.> Oct 20 22:32:07 xandrej dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.> Oct 20 22:32:07 xandrej DVB: registering new adapter (Afatech AF9015 DVB-T USB2.0 stick)> Oct 20 22:32:08 xandrej af9013: firmware version:4.95.0> Oct 20 22:32:08 xandrej DVB: registering frontend 0 (Afatech AF9013 DVB-T)...> Oct 20 22:32:08 xandrej tda18271 1-00c0: creating new instance> Oct 20 22:32:08 xandrej TDA18271HD/C1 detected @ 1-00c0> Oct 20 22:32:08 xandrej dvb-usb: Afatech AF9015 DVB-T USB2.0 stick successfully initialized and connected.> Oct 20 22:32:08 xandrej Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 16 -> 8> Oct 20 22:32:08 xandrej input: Afatech DVB-T 2 as /class/input/input10> Oct 20 22:32:08 xandrej input: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:1d.7-2.4> > And this is what it looks like now:> > Oct 21 20:46:09 xandrej usb 4-2: new high speed USB device using ehci_hcd and address 9> Oct 21 20:46:09 xandrej usb 4-2: configuration #1 chosen from 1 choice> Oct 21 20:46:09 xandrej dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in cold state, will try to load a firmware> Oct 21 20:46:09 xandrej firmware: requesting dvb-usb-af9015.fw> Oct 21 20:46:09 xandrej dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'> Oct 21 20:46:10 xandrej Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 16 -> 8> Oct 21 20:46:10 xandrej input: Afatech DVB-T 2 as /class/input/input13> Oct 21 20:46:10 xandrej input: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:1d.7-2> > As you can see, the module tda18271 does not load at all. Presumably, loading it manually does not help. (No output is produced.) Looks like even firmware does not ran. Could you try debug, load driver by modprobe dvb-usb-af9015 debug=3 > This seems *inexplicable* to me. I am the only user of this computer. There were no kernel updates between the two sessions. Everything remained unchanged, as far as software is concerned. However, my device is simly dead now and Kaffeine does not find it any more. Any piece of advice would be welcome. HW could be dead... If you can, test it with Windows. > > Regards,> > Andrej Podzimek regardsAntti -- http://palosaari.fi/ _______________________________________________linux-dvb mailing listlinux-dvb@xxxxxxxxxxxxxxx://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
