Re: Dvico HDTV7 Dual Express signal strength

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I actually have both.
The DViCO FusionHDTV 7 Gold [card=65] has the 1411 and the
DViCO FusionHDTV7 Dual Express [card=10,autodetected] has the 1409.

I can not read the signal strength on either of them.
Here is what femon yields on the Gold card (1411)
status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status SCVYL | signal 012c | snr 012c | ber 00000000 | unc 00000000 | FE_HAS_LOCK

recabling this same RF to a HDTV5 Gold card reports ~90-95% signal strength.

Thanks for any help.

--- On Tue, 10/14/08, Michael Krufky <mkrufky@xxxxxxxxxxx> wrote:
From: Michael Krufky <mkrufky@xxxxxxxxxxx>
Subject: Re: Dvico HDTV7 Dual Express signal strength
To: korey_avail@xxxxxxxxx
Cc: linux-dvb@xxxxxxxxxxx
Date: Tuesday, October 14, 2008, 6:33 PM

Korey ODell wrote:
> Does reading this card's signal strength work for anyone? I've
tried femon, azap with the latest v4l drivers and a 2.6.26 kernel. Card reports
a lock and otherwise works fine but basically reports 0 for a strength reading.


There are two versions of this card -- one that uses a s5h1409, and the other
uses a s5h1411. Which version do you have?

(dmesg output will indicate which board you have)

-Mike


--- On Tue, 10/14/08, Michael Krufky <mkrufky@xxxxxxxxxxx> wrote:
From: Michael Krufky <mkrufky@xxxxxxxxxxx>
Subject: Re: Dvico HDTV7 Dual Express signal strength
To: korey_avail@xxxxxxxxx
Cc: linux-dvb@xxxxxxxxxxx
Date: Tuesday, October 14, 2008, 6:33 PM

Korey ODell wrote:
> Does reading this card's signal strength work for anyone? I've
tried femon, azap with the latest v4l drivers and a 2.6.26 kernel. Card reports
a lock and otherwise works fine but basically reports 0 for a strength reading.


There are two versions of this card -- one that uses a s5h1409, and the other
uses a s5h1411. Which version do you have?

(dmesg output will indicate which board you have)

-Mike

_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux