> > > > it's not working with SR 30000 FEC 3/4 dvb-s2 8PSK, still the same > > > > problem. > > > > > > > > kind regards > > > > > > > > Newsy > > > > > > It seems that patch from > > > http://www.linuxtv.org/pipermail/linux-dvb/2008-July/027264.html is not > > > applied. The internal PLL must be disabled when setting new frequency as > > > is written in stb6100 documentation. > > > > has your July-patch any relation with stb0899 patches from Alex Betis ? > > > > http://www.linuxtv.org/pipermail/linux-dvb/2008-October/029455.html > > http://www.linuxtv.org/pipermail/linux-dvb/2008-September/029361.html > > > > Goga > > I don't think so as Alex's patches are for demodulator (stb0899) but my was > for tuner (stb6100). > > Regarding stb6100 doc the tuning procedure should be: > 1. Disable PLL (LPEN_LPEN) > 2. Set-up the tuner > 3. Start PLL > 4. Start VCO search > 5. Wait for 5 ms > 6. Disable VCO search, turn off VCO search clock and disable LPF BW clock > > The steps 1-5 should be done in 5 steps (not less) and as I remeber I've got > better result when inserting small delay between steps 1 and 2 and the delay > from step 5 was set to 10ms. In stb6100.c are steps 1 and 2 done together > within 1 write to stb6100 registers and this seems to be not optimal for some > modulations. that's why TT3200 owners have to try both patches together - from you and from Alex Betis ? is it correct ? Goga _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
