siano sms1xxx driver not T-DMB ready?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



here in Italy (bologna) we have a T-DMB trial from Rai and other broadcasters.

i got one Terratec Cinergy Piranha based on a Siano SMS1xxx chip and indeed the T-DMB stream works on the "other OS".. (and the DVB-T works too)

this T-DMB stuff is still based on Transport Stream:

 http://en.wikipedia.org/wiki/Digital_Multimedia_Broadcast

as i'd like to dump a full TS of the stream, i was thinking that it was just setting the proper mode (2) in the sms1xxx module, i would have been able to use the same "dvb-tools" like dvbstream to tune the right frequency and dump the whole TS.

too easy, it seems! there were my steps:

1. i put the firmware file for T-DMB demodulation with the right name "tdmb_stellar_usb.inp" in /lib/firmware

2. i loaded the module with the supposed right default mode: modprobe sms1xxx default_mode=2

3. i put my stick on the linux, but the module didn't got up with this error:

 "SMS Device mode is not set for DVB operation."

I'm halted.

The showstopper come from this smsdvb.c where there's this control:

====================
       if (smscore_get_devicke_mode(coredev) != 4) {
#if 1 /* new siano drop (1.2.17) does this -- yuck */
               sms_err("SMS Device mode is not set for "
                       "DVB operation.");
               return 0;
#else
====================

of course, this seems only a safety check.

let's hope it's not just a "marketing" showstopper (i'm going anyway to try to relax this control, i bet i'm not going to burn anything inside the device!)

probably there's more to be implemented to driver correctly the Siano chip when not in DVB mode. but how much? ask here could be useful..

it should be easy to "implement" the T-DMB stuff inside the same DVB scenario!
it's already a system based on transport stream. right?

sadly there are no open specs about it on the siano web site, just this brief:

 http://www.*siano-ms*.com/*pdf*s/00_Siano_SMS*1010*.*pd*f

does anyone know a solution about this issue?

is it so though to implement T-DMB decoding inside the DVB architecture?

are the specs available somewhere?

bye

andrea venturi

begin:vcard
fn:Andrea Venturi
n:;Andrea Venturi
org:Avalpa Digital Engineering SRL
adr;dom:;;Via dell'Arcoveggio 49/5;Bologna;BO;40129
email;internet:a.venturi@xxxxxxxxxx
title:CEO
tel;work:+39 0514187531
tel;cell:+39 3477142994
url:www.avalpa.com
version:2.1
end:vcard

_______________________________________________
linux-dvb mailing list
linux-dvb@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

[Index of Archives]     [Linux Media]     [Video 4 Linux]     [Asterisk]     [Samba]     [Xorg]     [Xfree86]     [Linux USB]

  Powered by Linux