On Sun, 5 Oct 2008, Mika Laitio wrote: >> Hello All, >> >> Today I finished the patch for DVB-S, DVB-S2, DVB-T and DVB-C support using S2API >> in combination with VDR 1.7.0. >> I've tested my code on DVB-S, DVB-S2 and DVB-T transports and they were >> all successful. DVB-C is untested (don't have a DVB-C option where I >> live) but it should work in *THEORY* ;) >> >> DVB-S and DVB-S2 were tested on a Hauppauge WinTV-NOVA-HD-S2 card. >> DVB-T was tested on a Gigabyte GT-U7000-RH USB device. >> I used the latest v4l pull and viewing was very stable with both DVB >> devices. I also didn't had any problems any more when switching between >> DVB-S(2) and DVB-T, but it can be that this patch will *NOT* work >> correctly on MFE DVB devices like the HVR-3000 or HVR-4000 (I had to do some hacking because strangely, >> DVB-T transports were offered to my DVB-S DVB device). Since I can't >> test this, I hope others can tell me if it works or not. >> >> Enclosed are two patches. The clean patch is for a clean VDR 1.7.0 >> source tree patched with Reinhard's >> vdr-1.7.0-h264-syncearly-framespersec-audioindexer-fielddetection-speedup.diff.bz2 >> patch. The patched patch is for those who have used Edgar (gimli) >> Hucek's patch for VDR 1.7.0. In theory it should also work with my last send >> patch. > > Hi > > I tried your patch and vdr fails to show dvb-t channels for me while dvb-s > channels works ok. > > I have tested with a following setup: > > - vdr-1.7.0 > + vdr-1.7.0-h264-syncearly-framespersec-audioindexer-fielddetection-speedup.diff > + vdr-1.7.0-s2api-04102008-clean.patch > - latest s2-mfe installed for 2.6.27-rc8 > - card-0: hvr-1300 (dvb-t, terrestrial cable connected) > - card-1: hvr-4000 (dvb-t, dvb-s, dvb-s2, only satellite cable connected) > > [lamikr@tinka ~]$ ls -la /dev/dvb/adapter0/ > total 0 > drwxr-xr-x 2 root root 120 2008-10-05 10:56 ./ > drwxr-xr-x 4 root root 80 2008-10-05 10:56 ../ > crw-rw----+ 1 lamikr video 212, 4 2008-10-05 10:56 demux0 > crw-rw----+ 1 lamikr video 212, 5 2008-10-05 10:56 dvr0 > crw-rw----+ 1 lamikr video 212, 3 2008-10-05 10:56 frontend0 > crw-rw----+ 1 lamikr video 212, 7 2008-10-05 10:56 net0 > [lamikr@tinka ~]$ ls -la /dev/dvb/adapter1/ > total 0 > drwxr-xr-x 2 root root 200 2008-10-05 10:56 ./ > drwxr-xr-x 4 root root 80 2008-10-05 10:56 ../ > crw-rw----+ 1 lamikr video 212, 68 2008-10-05 10:56 demux0 > crw-rw----+ 1 lamikr video 212, 84 2008-10-05 10:56 demux1 > crw-rw----+ 1 lamikr video 212, 69 2008-10-05 10:56 dvr0 > crw-rw----+ 1 lamikr video 212, 85 2008-10-05 10:56 dvr1 > crw-rw----+ 1 lamikr video 212, 67 2008-10-05 10:56 frontend0 > crw-rw----+ 1 lamikr video 212, 83 2008-10-05 10:56 frontend1 > crw-rw----+ 1 lamikr video 212, 71 2008-10-05 10:56 net0 > crw-rw----+ 1 lamikr video 212, 87 2008-10-05 10:56 net1 > > I also tried to connect the terrestrial cable to hvr-4000, but it did not > change anything. > > If I use tzap, dvbstream and mplayer > compination for hvr-1300 or if I use vdr-1.7.0 with liplianis multiptoto > drivers, then also dvb-t channels works ok. > > Mika > > _______________________________________________ > linux-dvb mailing list > linux-dvb@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb And here is the output from syslog after trying to switch channel: Oct 5 12:43:20 tinka vdr: [21353] switching to channel 1 Oct 5 12:43:21 tinka vdr: [21446] transfer thread ended (pid=21353, tid=21446) Oct 5 12:43:21 tinka vdr: [21353] buffer stats: 0 (0%) used Oct 5 12:43:21 tinka vdr: [21486] transfer thread started (pid=21353, tid=21486) Oct 5 12:43:21 tinka vdr: [21448] TS buffer on device 1 thread ended (pid=21353, tid=21448) Oct 5 12:43:21 tinka vdr: [21447] buffer stats: 0 (0%) used Oct 5 12:43:21 tinka vdr: [21447] receiver on device 1 thread ended (pid=21353, tid=21447) Oct 5 12:43:21 tinka vdr: [21487] receiver on device 1 thread started (pid=21353, tid=21487) Oct 5 12:43:21 tinka vdr: [21488] TS buffer on device 1 thread started (pid=21353, tid=21488) Oct 5 12:43:22 tinka vdr: [21357] frontend 0 timed out while tuning to channel 1, tp 706 Oct 5 12:43:22 tinka kernel: dvb_frontend_ioctl_properties() FE_SET_PROPERTY Oct 5 12:43:22 tinka kernel: dvb_frontend_ioctl_properties() properties.num = 1 Oct 5 12:43:22 tinka kernel: dvb_frontend_ioctl_properties() properties.props = 0000000042682d00 Oct 5 12:43:22 tinka kernel: dtv_property_process_set() Oct 5 12:43:22 tinka kernel: dtv_property_dump() tvp.cmd = 0x00000002 (DTV_CLEAR) Oct 5 12:43:22 tinka kernel: dtv_property_dump() tvp.u.data = 0x00000000 Oct 5 12:43:22 tinka kernel: dtv_property_process_set() Flushing property cache Oct 5 12:43:22 tinka kernel: dvb_frontend_ioctl_properties() FE_SET_PROPERTY Oct 5 12:43:22 tinka kernel: dvb_frontend_ioctl_properties() properties.num = 6 Oct 5 12:43:22 tinka kernel: dvb_frontend_ioctl_properties() properties.props = 0000000042682d00 Oct 5 12:43:22 tinka kernel: dtv_property_process_set() Oct 5 12:43:22 tinka kernel: dtv_property_dump() tvp.cmd = 0x00000002 (DTV_CLEAR) Oct 5 12:43:22 tinka kernel: dtv_property_dump() tvp.u.data = 0x00000000 Oct 5 12:43:22 tinka kernel: dtv_property_process_set() Flushing property cache Oct 5 12:43:22 tinka kernel: dvb_frontend_ioctl_properties() FE_SET_PROPERTY Oct 5 12:43:22 tinka kernel: dvb_frontend_ioctl_properties() properties.num = 6 Oct 5 12:43:22 tinka kernel: dvb_frontend_ioctl_properties() properties.props = 0000000042682d00 Oct 5 12:43:22 tinka kernel: dtv_property_process_set() Oct 5 12:43:22 tinka kernel: dtv_property_dump() tvp.cmd = 0x00000011 (DTV_DELIVERY_SYSTEM) Oct 5 12:43:22 tinka kernel: dtv_property_dump() tvp.u.data = 0x00000003 Oct 5 12:43:22 tinka kernel: dtv_property_process_set() Oct 5 12:43:22 tinka kernel: dtv_property_dump() tvp.cmd = 0x00000003 (DTV_FREQUENCY) Oct 5 12:43:22 tinka kernel: dtv_property_dump() tvp.u.data = 0x2a14b480 Oct 5 12:43:22 tinka kernel: dtv_property_process_set() Oct 5 12:43:22 tinka kernel: dtv_property_dump() tvp.cmd = 0x00000006 (DTV_INVERSION) Oct 5 12:43:22 tinka kernel: dtv_property_dump() tvp.u.data = 0x00000002 Oct 5 12:43:22 tinka kernel: dtv_property_process_set() Oct 5 12:43:22 tinka kernel: dtv_property_dump() tvp.cmd = 0x00000005 (DTV_BANDWIDTH_HZ) Oct 5 12:43:22 tinka kernel: dtv_property_dump() tvp.u.data = 0x00000000 Oct 5 12:43:22 tinka kernel: dtv_property_process_set() Oct 5 12:43:22 tinka kernel: dtv_property_dump() tvp.cmd = 0x00000004 (DTV_MODULATION) Oct 5 12:43:22 tinka kernel: dtv_property_dump() tvp.u.data = 0x00000003 Oct 5 12:43:22 tinka kernel: dtv_property_process_set() Oct 5 12:43:22 tinka kernel: dtv_property_dump() tvp.cmd = 0x00000001 (DTV_TUNE) Oct 5 12:43:22 tinka kernel: dtv_property_dump() tvp.u.data = 0x00000000 Oct 5 12:43:22 tinka kernel: dtv_property_process_set() Finalised property cache Oct 5 12:43:22 tinka kernel: dtv_property_cache_submit() Oct 5 12:43:22 tinka kernel: dtv_property_cache_submit() legacy, modulation = 3 Oct 5 12:43:22 tinka kernel: dtv_property_legacy_params_sync() Oct 5 12:43:22 tinka kernel: dtv_property_legacy_params_sync() Preparing OFDM req Oct 5 12:43:22 tinka kernel: dvb_frontend_ioctl_properties() Property cache is full, tuning _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
