Robert Vincent Krakora wrote: > Hello, > > I am experiencing the same problem as described in the link below. How > does one play with the #ifdefs in the compat.h file to negate these > errors? > > http://www.linuxtv.org/pipermail/linux-dvb/2006-September/012747.html > > Thanks in advance. > > Best Regards, > > ------------------------------------------------------------------------ > > Subject: > [Alsa-user] alsa kernel module versioning problem > From: > Robert Vincent Krakora <rob.krakora@xxxxxxxxxxxxxxxxxxxxx> > Date: > Tue, 23 Sep 2008 16:01:55 -0400 > To: > alsa-user@xxxxxxxxxxxxxxxxxxxxx, geisj@xxxxxxxxxxxxxxxxxxxxx > > To: > alsa-user@xxxxxxxxxxxxxxxxxxxxx, geisj@xxxxxxxxxxxxxxxxxxxxx > > > I am running alsa on CentOS5 and get the following errors from em28xx_audio: > > How can this be resolved? > > em28xx v4l2 driver version 0.0.1 loaded > em28xx new video device (2040:6513): interface 0, class 255 > em28xx: device is attached to a USB 2.0 bus > em28xx: you're using the experimental/unstable tree from mcentral.de > em28xx: there's also a stable tree available but which is limited to > em28xx: linux <=2.6.19.2 > em28xx: it's fine to use this driver but keep in mind that it will move > em28xx: to http://mcentral.de/hg/~mrec/v4l-dvb-kernel as soon as it's > em28xx: proved to be stable > em28xx #0: Alternate settings: 8 > em28xx #0: Alternate setting 0, max size= 0 > em28xx #0: Alternate setting 1, max size= 0 > em28xx #0: Alternate setting 2, max size= 1448 > em28xx #0: Alternate setting 3, max size= 2048 > em28xx #0: Alternate setting 4, max size= 2304 > em28xx #0: Alternate setting 5, max size= 2580 > em28xx #0: Alternate setting 6, max size= 2892 > em28xx #0: Alternate setting 7, max size= 3072 > attach_inform: eeprom detected. > em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 13 65 d0 12 5c 03 82 1e 6a 18 > em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00 00 00 00 00 00 00 00 > em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b 1c 00 00 > em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 01 01 00 00 00 00 > em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 34 00 30 00 > em28xx #0: i2c eeprom 70: 32 00 38 00 35 00 33 00 34 00 37 00 37 00 37 00 > em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00 56 00 20 00 > em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 38 00 30 00 00 00 > em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 b1 fe d0 18 85 > em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 f9 8f > em28xx #0: i2c eeprom c0: 1e f0 74 02 01 00 01 79 00 00 00 00 00 00 00 00 > em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 b1 fe d0 18 85 > em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 f9 8f > em28xx #0: i2c eeprom f0: 1e f0 74 02 01 00 01 79 00 00 00 00 00 00 00 00 > EEPROM ID= 0x9567eb1a > Vendor/Product ID= 2040:6513 > AC97 audio (5 sample rates) > 500mA max power > Table at 0x24, strings=0x1e82, 0x186a, 0x0000 > tveeprom 2-0050: Hauppauge model 65201, rev A1C0, serial# 2002937 > tveeprom 2-0050: tuner model is Xceive XC3028 (idx 120, type 71) > tveeprom 2-0050: TV standards PAL(B/G) PAL(I) PAL(D/D1/K) ATSC/DVB > Digital (eeprom 0xd4) > tveeprom 2-0050: audio processor is None (idx 0) > tveeprom 2-0050: has radio > tuner 2-0061: chip found @ 0xc2 (em28xx #0) > attach inform (default): detected I2C address c2 > /home/silentm/MessageNet/v4l-dvb-kernel-cd030297f684/v4l/tuner-core.c: > setting tuner callback > tuner 0x61: Configuration acknowledged > /home/silentm/MessageNet/v4l-dvb-kernel-cd030297f684/v4l/tuner-core.c: > setting tuner callback > /home/silentm/MessageNet/v4l-dvb-kernel-cd030297f684/v4l/xc3028-tuner.c: > attach request! > /home/silentm/MessageNet/v4l-dvb-kernel-cd030297f684/v4l/tuner-core.c: > xc3028 tuner successfully loaded > attach_inform: tvp5150 detected. > tvp5150 2-005c: tvp5150am1 detected. > Loading base firmware: xc3028_init0.i2c.fw > Loading default analogue TV settings: xc3028_BG_PAL_A2_A.i2c.fw > xc3028-tuner.c: firmware 2.7 > ANALOG TV REQUEST > em28xx #0: V4L2 device registered as /dev/video0 > em28xx #0: Found Hauppauge WinTV HVR 950 > usbcore: registered new driver em28xx > em28xx_audio: disagrees about version of symbol snd_pcm_new > em28xx_audio: Unknown symbol snd_pcm_new > em28xx_audio: disagrees about version of symbol snd_card_register > em28xx_audio: Unknown symbol snd_card_register > em28xx_audio: disagrees about version of symbol snd_card_free > em28xx_audio: Unknown symbol snd_card_free > em28xx_audio: disagrees about version of symbol snd_card_new > em28xx_audio: Unknown symbol snd_card_new > em28xx_audio: disagrees about version of symbol snd_pcm_lib_ioctl > em28xx_audio: Unknown symbol snd_pcm_lib_ioctl > em28xx_audio: disagrees about version of symbol snd_pcm_set_ops > em28xx_audio: Unknown symbol snd_pcm_set_ops > em28xx_audio: disagrees about version of symbol > snd_pcm_hw_constraint_integer > em28xx_audio: Unknown symbol snd_pcm_hw_constraint_integer > em28xx_audio: disagrees about version of symbol snd_pcm_period_elapsed > em28xx_audio: Unknown symbol snd_pcm_period_elapsed > em2880-dvb.c: DVB Init > Loading base firmware: xc3028_8MHz_init0.i2c.fw > Loading default dtv settings: xc3028_DTV8_2633.i2c.fw > xc3028-tuner.c: firmware 2.7 > Sending extra call for Digital TV! > /home/silentm/MessageNet/v4l-dvb-kernel-cd030297f684/v4l/xc3028-tuner.c: > attach request! > DVB: registering new adapter (em2880 DVB-T) > DVB: registering frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)... > Em28xx: Initialized (Em2880 DVB Extension) extension > [ > -- Rob Krakora Software Engineer MessageNet Systems 101 East Carmel Dr. Suite 105 Carmel, IN 46032 (317)566-1677 Ext. 206 (317)663-0808 Fax _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
