In message <953A45C4-975B-4A05-8B41-AE8A486D0CA6@xxxxxxxxxxxxxx>, Anders Semb Hermansen wrote: >Hello all, hi. >I put a HVR-4000 in my mythtv box, I'm only going to use it for >analogue TV right now. > >I have used dvb/v4l drivers from mercirual from yesterday and sfe-8969- >untested.diff from http://dev.kewl.org/hauppauge/ to get HVR-4000 >support. > >The system is Debian GNU/Linux lenny with latest packages and kernel >updated yesterday. Mythtv and multimedia packages are from debian- >multimedia. > >I also get the same error described below when using dvb/v4l driver >from http://linuxtv.org/hg/~stoth/s2-mfe > >I added it as a v4l capture card in mythtv (/dev/video0 and sound >from /dev/dsp2) and scanned for channels. Everything OK so far :) > >When I use mythtv and go into "Watch TV" I get snow on the screen (and >some green). If I change channel the picture comes up fine. So I >always have to change channel after pressing "Watch TV". This will >make recodings only show snow, because I cannot do the channel change >"trick". > >I got strange audio, but read somewhere else that I needed to change >audo samplerate to 48000. That fixed that problem. > >I get some errors from the kernel. <snip> I haven't tested analogue in mythtv, only dvb-s. My only testing has been done with TVTIME for analogue. What happens when you try that? cya. -- // / {:)==={ Darron Broad <darron@xxxxxxxx> \\ \ _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
