Le Wednesday 24 September 2008 16:31:02 Darron Broad, vous avez écrit : > In message <200809241538.51217.hftom@xxxxxxx>, Christophe Thommeret wrote: > > hi. > > <snip> > > >Btw, while cx24116 single-frontend seems pretty stable, the mfe driver is > > n= ot = > >here. As soon as i switch to dvb-t, the cx24116 firmware crashes (at least > > = seems so: ~"Firmware doen't respond .." ) and is reloaded on next S/S2 > > zap, = and after a while, the dvb-t signal appears more and more noisy. I > > have to = unload/reload the modules to cure this. > > Can you load dvb_core like this: > > dvb_core dvb_powerdown_on_sleep=0 > > This will stop access to the cx24116 when the bus is in use by the cx22702. > > This is a workaround until a better fix is found. Tell me if it solves it > for you, Thanks. Unfortunately, no. I will try with newer firmware, as soon as i find it. Btw: Darron, all these Eutelsat spec compliant msleep are already implemented by applications, so adding it in driver just increases diseqc delay :) I've removed all these in driver and diseqc works fine. -- Christophe Thommeret _______________________________________________ linux-dvb mailing list linux-dvb@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
